NEC Neax2000 Ivs Command Manual

CHAPTER 3 ND-45669 (E)
Pag e 2 84
Revision 2.0
CM90
COMMAND CODE
TITLE:
MULTILINE TERMINAL/SN610 ATTCON/ADD-ON MODULE KEY ASSIGNMENT
90
MAT
4. DATA TABLE:
4.1 Multiline Terminal
 
: Initial Data
YY SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
00
(Key 
Data)Setting of Functions X
XXXXStation Number
• Primary Extension Number
(FX-FXXXX)
• Multiline Number 
(ordinary station)
• Multiline Number 
(assigned by CM11)
X=0-9, A(*), B(#)CM10
CM11
A000
A031
A100
A131Automatic Intercom Number CM11
CM12
YY...

ND-45669 (E) CHAPTER 3
Pag e 2 85
Revision 2.0
CM90
COMMAND CODE
TITLE:
MULTILINE TERMINAL/SN610 ATTCON/ADD-ON MODULE KEY ASSIGNMENT
90
MAT
00
(Key 
Data)Setting of Functions AA01
AA05
AA11
AA15
AA71
AA75Loop Line Number for Multiline Terminal 
Attendant Position
AAX XXCM11
CM15 YY = 71
CM12 YY = 03
AB00
AB99ICI/OPR Line
Number for Multiline Terminal Attendant 
Position NumberCM11
CM15 YY = 71
CM12 YY = 03
CX
CXXXXVirtual-Line Station No. for Off-Hook 
Voice AnnouncementCM11
DXXX Trunk (XXX = 000 - 255)...

CHAPTER 3 ND-45669 (E)
Pag e 2 86
Revision 2.0
CM90
COMMAND CODE
TITLE:
MULTILINE TERMINAL/SN610 ATTCON/ADD-ON MODULE KEY ASSIGNMENT
90
MAT
00
(Key 
Data)Setting of Functions F0XXX XXX
020: Call Pickup-Group (PICK)
021: Call Pickup-Direct (DPICK)
022: Do Not Disturb (DND)
024: Automatic Wake Up/
Timed Reminder (WU)
027: Wake-Up Call set from predeter-
mined Station (Single Wake-Up 
time operation) (SWU)
028: Wake-Up Call set from predeter-
mined station (Multiple Wake-Up 
time Operation) (MWU)
033:...

ND-45669 (E) CHAPTER 3
Addendum-002 Page 287
JANUARY, 1999 Revision 2.2
CM90
COMMAND CODE
TITLE:
MULTILINE TERMINAL/SN610 ATTCON/ADD-ON MODULE KEY ASSIGNMENT
90
MAT
 
: Initial Data
YY SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
00
(Key 
Data)Setting of Functions F0XXX XXX
067: System Speed Dialing 
(300 memory)
068: System Speed Dialing
(1000 memory)
069: Last Number Redial-(LAST) 
085: Account Code (ACC) 
097: Direct Data Entry
100: Trunk Route 00
163: Trunk Route 63
200: Route Advance 00...

CHAPTER 3 ND-45669 (E)
Page 288 Addendum-001
Revision 2.1 AUGUST, 1998
CM90
COMMAND CODE
TITLE:
MULTILINE TERMINAL/SN610 ATTCON/ADD-ON MODULE KEY ASSIGNMENT
90
MAT
00
(Key 
Data)Setting of Functions F1XXX XXX
007: DTMF Additional Dial
(Programmable) (PBPRG)
008: DTMF Additional Dial (Fixed 
Width) (PBIX)
009: Hooking Signal sent to outside 
(SHF)
010:  (HOLD)
011:  
012:  (CNF)
013: Save & Repeat (2) (S&R2)
014: Save & Repeat (3) (S&R3)
015:  (RECAL)
016:  (SPKR)
017:  (MIC) Use as a one-touch 
mute...

ND-45669 (E) CHAPTER 3
Addendum-001 Page 289
AUGUST, 1998 Revision 2.1
CM90
COMMAND CODE
TITLE:
MULTILINE TERMINAL/SN610 ATTCON/ADD-ON MODULE KEY ASSIGNMENT
90
MAT
00
(Key 
Data)Setting of Functions F1XXX 085: Voice Message Waiting Service-
Individual Set when called station is 
no answer or busy
090: Headset/Handset
Note:Used to switch to headset or
back to handset.
091: Record
092: Paude
093: Re-record
094: End
095: Erase
096: Address
097: Urgent page
098: Voice Mail key
099: Calling Number/Calling...

CHAPTER 3 ND-45669 (E)
Page 290 Addendum-001
Revision 2.1 AUGUST, 1998
CM90
COMMAND CODE
TITLE:
MULTILINE TERMINAL/SN610 ATTCON/ADD-ON MODULE KEY ASSIGNMENT
90
MAT
00
(Key 
Data)Setting of Functions F20XX XX
00: DATA (DATA)
01: AUTO/DISP (A/D)
02: DTX (DTX)
03: DISP (DISP)
04: AUTO (AUTO)
05: DATA DND (D DND)CM1A
CMA1 YY = 01
CMA1 YY = 01
F3XXX Call Park-Tenant CM08-133
F40XX XX
00: TAS Answer on Tenant 00 (ANS00)
01: TAS Answer on Tenant 01 (ANS01)
 
63: TAS Answer on Tenant 63 (ANS63)
NoteCM30
YY=00,...

ND-45669 (E) CHAPTER 3
Pag e 2 91
Revision 2.0
CM90
COMMAND CODE
TITLE:
MULTILINE TERMINAL/SN610 ATTCON/ADD-ON MODULE KEY ASSIGNMENT
90
MAT
00
(Key 
Data)Setting of Functions F6010
F6017Call Termination from FX Line 0 (FX0)
Call Termination from FX Line 7 (FX7)CM35 YY=15
F6020
F6027Call Termination from WATS Line 0 
(WATS0)
Call Termination from WATS Line 7 
(WATS7)CM35 YY=15
F6030
F6037Call Termination from CCSA Line 0 
(CCSA0)
Call Termination from CCSA Line 7 
(CCSA7)CM35 YY=15
F7XXX CM44-XXX-1500
01...

CHAPTER 3 ND-45669 (E)
Pag e 2 92
Revision 2.0
CM90
COMMAND CODE
TITLE:
MULTILINE TERMINAL/SN610 ATTCON/ADD-ON MODULE KEY ASSIGNMENT
90
MAT
4.2 SN610 ATTCON / SN716 DESKCON
• ATTCON Incoming Call Identification Key
YY
SETTING
DATAFUNCTIONSTANDARD 
KEY
SETTINGREMARKSRELATED
COMMAND
No. MEANING
00
(Key 
data)Setting of 
FunctionF6000
F6007C.O. Incoming 0 (LDN0)
C.O. Incoming 7 (LDN7)LDN0 CM35
YY=15
F6010
F6017Call Termination from FX 
Line 0 (FX0)
Call Termination from FX 
Line 7 (FX7)CM35
YY=15
F6020...

ND-45669 (E) CHAPTER 3
Pag e 2 93
Revision 2.0
CM90
COMMAND CODE
TITLE:
MULTILINE TERMINAL/SN610 ATTCON/ADD-ON MODULE KEY ASSIGNMENT
90
MAT
Note:Do not assign ATTCON Incoming Call Identification Key data (F60XX) to key numbers 1 to 6.
00
(Key 
data)Setting of 
FunctionF6060 Operator Call (ATND) ATND
F6061 Recall (RCL) RCL
F6062 Serial Call Termination (SRL) CM90 – 
F6105
F6063 Call Forwarding-No Answer 
(NANS)CM51
YY = 00, 01
F6064 Call Forwarding-Busy Line 
(BUSY)CM51
YY = 03, 04
F6065 Call...