NEC Neax2000 Ivs Command Manual

CHAPTER 3 ND-45669 (E)
Pag e 2 54
Revision 2.0
CM78
COMMAND CODE
TITLE:
DESTINATION OF SPLIT CALL FORWARDING
78
4. DATA TABLE:
1. FUNCTION:
This command is used to assign the called number of Split Call Forwarding.
2. PRECAUTION:
None.
3. ASSIGNMENT PROCEDURE:
• To assign destination of Split Call Forwarding
• To cancel destination of Split Call Forwarding
1S T DATA 2ND DATA
DATA MEANING DATA MEANING DESTINATION
XXY XX Y
Block Number 
(0-7)
Tenant Number 
(00-63)X-XXX + + YY YY
Called Number 
(Max. 26...

ND-45669 (E) CHAPTER 3
Pag e 2 55
Revision 2.0
CM81
COMMAND CODE
TITLE:
TOLL RESTRICTION PATTERN ON EACH TRUNK RESTRICTION CLASS
81
1. FUNCTION:
Toll call restriction is controlled by combinations of the toll office code dialed and assigned station trunk
restriction class. With respect to toll call restriction, there are five kinds of trunk restriction classes:
Unrestricted (RCA), Non-Restricted-1 (RCB), Non-Restricted-2 (RCC), Semi-Restricted-1 (RCD), and
Semi-Restricted-2 (RCE). Since toll call...

CHAPTER 3 ND-45669 (E)
Pag e 2 56
Revision 2.0
CM81
COMMAND CODE
TITLE:
TOLL RESTRICTION PATTERN ON EACH TRUNK RESTRICTION CLASS
81
4. DATA TABLE:
 
YY TRUNK RESTRICTION ASSIGNMENT DATA
No. MEANING No. MEANING DATA MEANING
01
13Toll Restriction Pattern:01
Number for each Class:131
2
3
4
5Unrestricted (RCA)
Non-Restricted-1 (RCB)
Non-Restricted-2 (RCC)
Semi-Restricted-1 (RCD)
Semi-Restricted-2 (RCE)0
1
2
3Restricted
Not used
Not used
Allowed
~~ 

ND-45669 (E) CHAPTER 3
Pag e 2 57
Revision 2.0
CM85
COMMAND CODE
TITLE:
MAXIMUM DIGITS ON C.O. CALLS
85
MAT
4. DATA TABLE:
Note 1:If the office code is not assigned with this command, the maximum number of sending digits is
automatically set to “24”.
Note 2:Allows the development of a secondary table.
1. FUNCTION:
This command is used to define the maximum number of digits which can be dialed, after C.O. access,
given a specific first digit.
2. PRECAUTION:
(1) This command is included in MAT mode menu...

CHAPTER 3 ND-45669 (E)
Pag e 2 58
Revision 2.0
CM88
COMMAND CODE
TITLE:
AUTOMATIC PAUSE ENTRY TABLE
88
4. DATA TABLE:
Note:In this case, the caller is required to dial after confirming dial tone from a distant office.
1. FUNCTION:
This command is used to define the pause which is automatically provided with particular dialed digits
on an outgoing call.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
: Initial Data
Y
BLOCK
NUMBERSETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
0 Designation of digits...

ND-45669 (E) CHAPTER 3
Pag e 2 59
Revision 2.0
CM8A
COMMAND CODE
TITLE:
LCR/TOLL RESTRICTION DEVELOPMENT TABLE
8A
MAT
4. DATA TABLE:
4.1 Toll Restriction 
(Related CM35 YY = 11, 76)
1. FUNCTION:
This command is used to define the development tables used for Least Cost Routing (LCR) and Toll
Restriction (TR) features.
2. PRECAUTION:
This command is included in MAT mode menu “B5” (L.C.R. & T.R. - Develop - [COM01]) and “B6”
(L.C.R. & T.R. Pattern [COM01]).
3. ASSIGNMENT PROCEDURE:
: Initial Data
YYY 1ST...

CHAPTER 3 ND-45669 (E)
Pag e 2 60
Revision 2.0
CM8A
COMMAND CODE
TITLE:
LCR/TOLL RESTRICTION DEVELOPMENT TABLE
8A
MAT
300
303
(RATWN)Date Pattern No. 0
Date Pattern No. 30
1
2
3
4
5
6
(Week)Sunday
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday000
063
(RATN)Route Pattern No. 0
Route Pattern No. 63
(YYY = 000 - 063)
100
115
(TNP)Tenant Pattern No. 0
Tenant Pattern No. 15
(YYY = 100 - 115)
200
207
(RATDN)Time Pattern No. 0
Time Pattern No. 7
(YYY = 200 - 207)
400
404
(DCP)Area Code
Development
Pattern...

ND-45669 (E) CHAPTER 3
Pag e 2 61
Revision 2.0
CM8A
COMMAND CODE
TITLE:
LCR/TOLL RESTRICTION DEVELOPMENT TABLE
8A
MAT
500
755
(LPN)TR(/LCR) Pattern 
No. 000
TR(/LCR) Pattern 
No. 255000
(CP)Designation of Toll Re-
striction Pattern No. 
specified by CM8100
15 Toll Restriction 
Pattern No. 00
Toll Restriction 
Pattern No. 15
(See CM81)
020
(SAP)Designation of 6-digit 
Toll Restriction Pattern 
No.
(See YYY = 800-849)00
49
CCC 6-digit Toll Restriction 
Pattern No. 00
6-digit Toll Restriction 
Pattern No....

CHAPTER 3 ND-45669 (E)
Pag e 2 62
Revision 2.0
CM8A
COMMAND CODE
TITLE:
LCR/TOLL RESTRICTION DEVELOPMENT TABLE
8A
MAT
4.2 LCR
: Initial Data
Y Y Y 1S T  DATA 2ND DATA
No. MEANING DATA MEANING DATA MEANING
000
063
(RATN)Route Pattern No. 0
Route Pattern No. 630
(No.)Designation of next table 
(Route Pattern No.)00
63
(RATN)Route Pattern No. 0
Route Pattern No. 63
1
2
3
4
(No.)1st
2nd
3rd
4th0000
25563
100
115
(TNP)Tenant Pattern No. 0
Tenant Pattern No. 1500
63
(TN No.)Tenant No. 0
Tenant No. 6300
63...

ND-45669 (E) CHAPTER 3
Addendum-001 Page 263
AUGUST, 1998 Revision 2.1
CM8A
COMMAND CODE
TITLE:
LCR/TOLL RESTRICTION DEVELOPMENT TABLE
8A
MAT
: Initial Data
YYY 1ST DATA 2ND DATA
No. MEANING DATA MEANING DATA MEANING
400
407
(DCP)Area Code
Development
Pattern No. 0
Area Code
Development
Pattern No. 7Area Code
(Max. 8 digits)
N: 2-9
X: 0-9000
063
(RATN)Route Pattern No. 0
Route Pattern No. 63
(YYY = 000 - 063)
100
115
(TNP)Tenant Pattern No. 0
Tenant Pattern No. 15
(YYY = 100 - 115)
200
207
(RATDN)Time...