NEC Neax 2400 Ipx Feature Programming Manual

NEAX2400 IPX Feature Programming ManualPage 328NDA-24297, Issue 1
D-153 Distinctive Ringing - Caller ID
Service Conditions (cont’d)
13. Ringer patterns 2, 3 or 4 cannot be assigned for this feature. When one of those ringer patterns is assigned
from the MAT, default value“Ringer pattern 6”is automatically set.
14. When System Data 3 is changed, circuit card (LC,ELC) initialization is required.
15. The following circuit card is required for Analog Caller ID:
16. When the multiple incoming calls are...

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 329
Dual Station Call D-156
D-156 Dual Station Call
General Description
This feature allows a user to simultaneously call two stations (referred as a Main Station and Sub Station), which
are accommodated in two different nodes within an FCCS network, by dialing one telephone number of the Main
Station. At that time, the call can be answered from either the Main or the Sub Station. Additionally, when this
service is used with BOSS-SECRETARY...

NEAX2400 IPX Feature Programming ManualPage 330NDA-24297, Issue 1
D-156 Dual Station Call
Operating Procedure (cont’d)
b.) Receive dial tone.
c.) Dial Station A’s telephone number.
d.) Station A, Station B and Station C ring.
2. To answer a call via Station C:
a.) Station C answers.
b.) The caller is connected with Station C.
c.) Station A and Station B stop ringing.
d.) Station C presses Station A’s line.
e.) The caller hears MSC and Station C’s user hears ringback tone.
f.) Station C calls Station B as...

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 331
Dual Station Call D-156
Service Conditions (cont’d)
10. CALL BACK [C-1] is available for only the station to be set CALL BACK.
11. This service is activated in a Hotel/Motel system, but not activated with Hotel/Motel application service.
12. When a Sub Station is in communication, the telephone number of the Sub Station is sent to OAI or MFC
as Calling Number notification.
13. When a Sub Station is busy, a call terminates to the Main...

NEAX2400 IPX Feature Programming ManualPage 332NDA-24297, Issue 1
D-156 Dual Station Call
Interactions (cont’d)
8. When a calling party sets VOICE CALL [V-2] or performs switch hook flash while calling a Main Station
and Sub Station, the Sub Station stops ringing.
9. This service is not activated when a call is terminated via INTERCOM CALLING [I-9], AUTOMATIC/
MANUAL INTERCOM [A-30], DIAL INTERCOM [D-87] or MANUAL SIGNALING [M-47] (only the
Main Station rings).
10. This service is not activated while...

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 333
Dual Station Call D-156
Programming (cont’d)
STEP 5:ADKS-AssigntheB-MVkeytothesoftkeyofeachstation.Note
TN (tenant number), STN (station number)
SKP (soft key pattern): 1~15
LKP (Key Pattern Data): 1=16 Line/Feature buttons + 16 DSS keys
2 = 24 Line/Feature buttons + 8 DSS keys
3 = 32 Line/Feature
PG: 0 = Page Change key appears on the soft key (>>>)
1 = Page Change key appears on the feature key
Note 3:When the soft key data is used on a...

NEAX2400 IPX Feature Programming ManualPage 334NDA-24297, Issue 1
E-1 Executive Right-of-Way
E-1 Executive Right-of-Way
General Description
This feature enables selected users, upon encountering a busy condition at an internal station, to bridge into the busy
connection.
Operating Procedure
To enter a busy connection
1. Dial the busy station; receive busy tone.
2. Switch hook flash; receive special dial tone.
3. Dial the EXECUTIVE RIGHT-OF-WAY access code; warning tone is sent.
4. The calling station is...

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 335
Executive Right-of-Way E-1
Service Conditions (cont’d)
4. If one party disconnects after the three-way conference bridge is established, the remaining two parties
will still be connected.
5. The EXECUTIVE RIGHT-OF-WAY access code may be assigned according to customer preference.
6. The maximum number of simultaneous Executive Overrides allowable is dependent on the number of
conference function trunks in the system. (Conference function...

NEAX2400 IPX Feature Programming ManualPage 336NDA-24297, Issue 1
E-1D Executive Right-of-Way - Dterm
E-1D  Executive Right-of-Way - Dterm
General Description
This feature enables selected Dtermusers, upon encountering a busy condition at an internal station, to bridge into
the busy connection after transmitting a warning tone.
Operating Procedure
To enter a busy connection from a Dterm
1. Dial the busy station; receive busy tone.
2. Press the EXECUTIVE RIGHT-OF-WAY OVER key; the associated LED lights...

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 337
Executive Right-of-Way - DtermE-1D
Service Conditions (cont’d)
EXCLUSIVE HOLD - Dterm[E-4D]
NON-EXCLUSIVE HOLD - Dterm[N-7D]
OFF-HOOK QUEUING [O-7, O-11]
OUTGOING TRUNK QUEUING [O-2, O-2D]
PRIVACY - D
term[P-14D]
PRIVACY RELEASE [P-18]
THREE-WAY CALLING [T-2, T-2D]
VOICE CALL [V-2, V-7]
VOICE CALL - D
term[V-2D]
Data Call through Data Adapter / Data Call through Data Module
Note:In any of the above instances, the calling station will...