NEC Neax 2400 Ipx Feature Programming Manual

NEAX2400 IPX Feature Programming ManualPage 348NDA-24297, Issue 1
F-1 Flexible Numbering of Stations
F-1  Flexible Numbering of Stations
General Description
This feature provides the ability to assign telephone numbers of the voice station and data station to any
corresponding instrument location, depending solely upon numbering plan limitations.
Operating Procedure
Refer to the NEAX2400 IPX Office Data Specification.
Service Conditions
1. Careful consideration should be given to any numbering...

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 349
Flexible Numbering of Stations F-1
Programming (cont’d)
STEP 3:ASPA- Assign the station numbering in such a way that the system will differentiate the station
numbering via the access codes programmed here. The following data is programmed:
The following access codes should also be assigned: 323, 324, 325, 326, 327, 328, 329, 320. CI: N, H;
SRV = STN (Station); and NND: 4 will be assigned with each of the above.
FCCS Programming 
No...

NEAX2400 IPX Feature Programming ManualPage 350NDA-24297, Issue 1
F-2 FX Access
F-2 FX Access
General Description
This feature provides dial access to distant Central Offices using Foreign Exchange (FX) trunks. All incoming calls
to the NEAX2400 IPX from the FX Central Office area are placed to the listed Foreign Exchange Directory number
and are answered by the Attendant in a manner similar to LDN service. Outgoing calls can be made on an Attendant
handled basis using direct or dial access and/or on a...

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 351
FX Access F-2
Interactions (cont’d)
6. When the system is in the night mode of operation, incoming FX calls can be answered using NIGHT
CONNECTION - FIXED [N-1], FLEXIBLE [N-2] or TRUNK ANSWER FROM ANY STATION [T-8]
feature.
7. DIRECT INWARD DIALING [D-8] is not provided for FX trunks. All calls are normally routed to the
Attendant, UCD group, or a CAS Attendant.
8. Outgoing FX trunk calls can be restricted from preselected stations by...

NEAX2400 IPX Feature Programming ManualPage 352NDA-24297, Issue 1
F-3D Flash Button - Dterm
F-3D  Flash Button - Dterm
General Description
This feature provides for a Dtermset to program one of the programmable line/feature keys to function as a FLASH
BUTTON. The FLASH BUTTON will function in the manner a switch hook flash does for a single-line set.
Operating Procedure
When activating features common to both Dterm and single-line sets
1. Press the FLASH BUTTON to receive special dial tone,
2. Dial the...

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 353
FlashButton-DtermF-3D
Programming (cont’d)
STEP 2:ADSL- SN=5 (Consultation Hold) and FKY=21 (Flash Button; FLASH).
This command is used for assigning the function to each soft key. 

NEAX2400 IPX Feature Programming ManualPage 354NDA-24297, Issue 1
F-4D Flash Entry - Dterm
F-4D  Flash Entry - Dterm
General Description
ThisfeatureallowsaDtermuser to insert a switch hook flash as the first digit in a stored SPEED CALLING-ONE
TOUCH-Dterm[S-26D] number.
Operating Procedure
To add a flash to a stored SPEED CALLING-ONE TOUCH-Dterm [S-26D] number to a Dterm
1. Stay on-hook.
2. Press the Feature key and the SPEED CALLING-ONE TOUCH-D
term[S-26D] key; the LCD display will
either be blank or a...

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 355
Flash Entry - DtermF-4D
Interactions
Refer to the NEAX2400 IPX Office Data Specification, ASYD, System Data 3, Index 2 for programming the
characteristics of a switch hook.
Programming
This is a Dtermfeature. It is inherent to the instrument and requires no programming via the MAT. 

NEAX2400 IPX Feature Programming ManualPage 356NDA-24297, Issue 1
F-5D Flexible Ringing Assignment - Dterm
F-5D  Flexible Ringing Assignment - Dterm
General Description
This feature enables Dtermline appearances to be individually programmed for ringing, not ringing, ringing (day
only), or ringing (night only).
Operating Procedure
No manual operation is required once FLEXIBLE RINGING ASSIGNMENT has been programmed in system data.
Service Conditions
1. Recall ringing supersedes all ringing possibilities...

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 357
Flexible Ringing Assignment - DtermF-5D
Programming (cont’d)
RG: Ringing Assignment per Multi-line Appearance
0: No Ringing.
1: Ringing in Day Mode Only.
2: Ringing in Night Mode Only.
3: Ringing Day and Night.