NEC Neax 2400 Ipx Feature Programming Manual

NEAX2400 IPX Feature Programming ManualPage 318NDA-24297, Issue 1
D-149 Direct Station Selection (DSS) Console
Programming (cont’d)
STEP 1:Assign the DSS/BLF to an even-numbered LEN level. (In this example“LV 0”is used.)
TN: X
STN: 200
LEN: 000100 even-numbered LEN level
TEC: 12 fixed
RSC: X
SFC: X
Assign a station which is used for programming DSS keys (KYNs 31-60) to the subsequent LENs. (In
this example“LV 1”is used.)
TN: X
STN: 201
LEN: 000101 to the subsequent LEN
TEC: 12 fixed
RSC: X
SFC: X
STEP...

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 319
Direct Station Selection (DSS) Console D-149
Programming (cont’d)
KYN: 10-39
KYI: 2 (= Multi Line)
KD: 2 (= For DSS Console Key)
TN: X
STN: XXXXX desired station number (maximum five digits)
DSS Key Assignment for DSS/BLF
Example of Data Programming for DSS/BLF
ASDT
Note:*0=Even-numbered LEN level / **1=Odd-numbered LEN level.
TENANT 
NUMBER (TN) 
1-63STATION 
NUMBER 
(STN) MAX. 5 
DIGITSLINE EQUIPMENT 
NUMBER (LENS) TELE. EQUIP. 
CLASS...

NEAX2400 IPX Feature Programming ManualPage 320NDA-24297, Issue 1
D-149 Direct Station Selection (DSS) Console
Programming (cont’d)
AKYD
For even-numbered LV (2n)
Note:*Buttons 1-40 are assignable / **Assignment of DSS keys (KYNs 1-30) using even-numbered LEN level
MY LINE
TYPE OF 
D
TERM (TP) 0/1RING DATA 
(RING) 0-3FORM OF LINE 
PREFERENCE 
(PRI) 0-3LINE 
PREFERENCE
(LN PRE) 0/1LINE PREFERENCE FOR 
SPEAKER BUTTON (SPK) 0 TENANT 
NUMBER (TN)
1-15/63STATION 
NUMBER 
(STN) MAX. 5 
DIGITS
*X 200 1 X 0 0 0...

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 321
Direct Station Selection (DSS) Console D-149
Programming (cont’d)
For odd-numbered LV (2n+1)
Note:*Buttons 1-40 are assignable / **Assignment of DSS keys (KYNs 31-60) using odd-numbered LEN level.
MY LINE
TYPE OF 
D
TERM (TP) 0/1RING DATA 
(RING) 0-3FORM OF LINE 
PREFERENCE 
(PRI) 0-3LINE 
PREFERENCE
(LN PRE) 0/1LINE PREFERENCE FOR 
SPEAKER BUTTON (SPK) 0 TENANT 
NUMBER (TN)
1-15/63STATION 
NUMBER 
(STN) MAX. 5 
DIGITS
*X 201 1 X 0 0 0...

NEAX2400 IPX Feature Programming ManualPage 322NDA-24297, Issue 1
D-149 Direct Station Selection (DSS) Console
Programming (cont’d)
Add-On Module
This section explains how to assign an Add-On Module. The associated data programming is
explained in the following example:
Data Programming Procedure for Add-On Module
When assigning Add-On Module data, perform the following procedure. Note that“X”indicates the
value should be tailored to the existing system.
STEP 1:Assign a D
termto an even-numbered LEN...

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 323
Direct Station Selection (DSS) Console D-149
Programming (cont’d)
TP: 1 Buttons 1-40 assignable
RING: X
PRI: 0
LN PRE:0 (= Prime Line Pick up)
MWD: X
PL TN: X
STN: 200
S: 0 (= Off Hook Suppression is off)
KYN: 1-16 (for D
term)
17-40 Correspond to KYNs (1-24) on the Add-On Module
KYI: X
KD: X
TN: X
STN: XXXX
RG: X
ICM: X
G-ID: X
Assignment of the last 36 keys on the ADM: For assigning these keys’information, the Add-On
Module port is...

NEAX2400 IPX Feature Programming ManualPage 324NDA-24297, Issue 1
D-149 Direct Station Selection (DSS) Console
Programming (cont’d)
DSS Key Assignment for Add-On Module
Example of Data Programming for Add-On Module
ASDT
Note:*0=Even-numbered LEN level / **1=Odd-numbered LEN level.
TENANT 
NUMBER 
(TN) 1-63STATION 
NUMBER 
(STN) MAX. 
5 DIGITSLINE EQUIPMENT NUMBER (LENS) TELE. 
EQUIP. 
CLASS 
(TEC) 1-31ROUTE 
REST. 
CLASS 
(RSC) 0-15SERVICE 
FEATURE 
CLASS 
(SFC) 0-15 REMARKS MG U G LV
X20000010*0X X X...

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 325
Direct Station Selection (DSS) Console D-149
Programming (cont’d)
AKYD
For Line/Feature access keys: KYNs 1-24 (D
term)
Note:*Buttons 1-40 are assignable / **Assignment of Line/Feature access keys (KYNs 1-16) on Dterm“200”/
**Assignment of Line/Feature access keys (KYNs 1-24) on Add-On Module“201”
MY LINE
TYPE OF 
D
TERM (TP) 0/1RING DATA 
(RING) 0-3FORM OF LINE 
PREFERENCE 
(PRI) 0-3LINE 
PREFERENCE
(LN PRE) 0/1LINE PREFERENCE FOR...

NEAX2400 IPX Feature Programming ManualPage 326NDA-24297, Issue 1
D-149 Direct Station Selection (DSS) Console
Programming (cont’d)
For Line/Feature access keys: KYNs 25-60 (Add-On Module)
Note:*Buttons 1-40 are assignable / **Assignment of Line Appearance data for Add-On Module“201”/
***Assignment of Line/Feature access keys (KYNs 25-60) on Add-On Module“201”
MY LINE
TYPE OF 
D
TERM (TP) 0/1RING DATA 
(RING) 0-3FORM OF LINE 
PREFERENCE 
(PRI) 0-3LINE 
PREFERENCE
(LN PRE) 0/1LINE PREFERENCE FOR 
SPEAKER...

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 327
Distinctive Ringing - Caller ID D-153
D-153  Distinctive Ringing - Caller ID
General Description
This feature is a part of CALLER ID service. This feature provides a distinctive ringing pattern (0, 1, 5, 6 or 7)
according to the received calling number.
Operating Procedure
No manual operation is required.
Service Conditions
1. On-off timing of Ringer Patterns 0, 1, 5, 6 and 7 can be changed using ASYD command. System data
assigned for...