NEC Neax 2400 Ipx Feature Programming Manual

NEAX2400 IPX Feature Programming ManualPage 248NDA-24297, Issue 1
C-150 Call Block
Service Conditions (cont’d)
12. Only one Restriction Number (a maximum of 32 digits) can be registered per station. A maximum of 32
digit Restriction Number can be assigned up to five numbers per Dtermand one number per analog station.
A maximum of 511 stations can be registered per 1 IMG.
13. The Restriction Number cannot be confirmed from single line telephones after registration.
14. To assign the Restriction Number, it...

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 249
Call Block C-150
Service Conditions (cont’d)
29. When confirming the registered Restriction Number, the oldest number registered on MY LINE is
displayed for 5 seconds on the LCD. When the multiple Restriction Number is assigned, press CALL
BLOCK key to change the display to the later registered number, the displayed number is changed in order
as the key is pressed.
30. When deleting the Restriction Number with the access code from a D...

NEAX2400 IPX Feature Programming ManualPage 250NDA-24297, Issue 1
C-150 Call Block
Service Conditions (cont’d)
41. The ELC cards to display the indication for the operation procedure on the LCD when confirming the
latest calling number or the registered Restriction Number is shown below.
Interactions
1. Call Forwarding - All Calls [C-5] takes precedence over this feature.
2. If this service is set at both the station and MAT, the station has priority.
3. When the data on a station is changed by FOLLOW...

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 251
Call Block C-150
Programming (cont’d)
STEP 5:ADSL- Assign the soft key data of Call Block for Dtermaccording to the following parameter:
SKP = 0-15 (Soft Key Pattern)
SN=0,1,4(CallSituationNumber)
SKN = 1-16 (Soft Key Number)
FKY = 128 (Call Block Key)
STEP 6:ADKS-AssignthesoftkeydataofCallBlockforD
termaccording to the following parameter:
TN = Tenant Number
STN = Station Number
SKP = 1-15 (Soft Key Pattern of Call Block assigned in...

NEAX2400 IPX Feature Programming ManualPage 252NDA-24297, Issue 1
C-151 Call Return
C-151 Call Return
General Description
This feature allows the Dtermor an analog station to save the received calling number and the received number of
the station. The following two types of saving features are available:
Automatic Saving: The received calling number/number of the station is automatically saved when the
station rings. The stored number can be dialed by pressing the feature key or dialing the
access...

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 253
Call Return C-151
Operating Procedure (cont’d)
Manual Saving (equal to SAVE AND REPEAT - Dterm [S-24D]
1. Saving Calling Number
a.) Press the S&R key while in conversation using My Line or Sub Line.
b.) The received calling number is saved and the S&R key lights red.
Note:One calling number can be saved. When a calling number has already saved using SAVE AND REPEAT -
Dterm, the saved calling number is overwritten.
2. Displaying Stored...

NEAX2400 IPX Feature Programming ManualPage 254NDA-24297, Issue 1
C-151 Call Return
Service Conditions (cont’d)
b.) This feature is available for following calls.
ISDN/C.O. Call:
CCIS Call via ISDN/C.O. Line:
Station-to-Station Call:
  PBX 
  Terminal B 
Termination
ISDN/C.O. Line
  Terminal A
  PBX 
  PBX 
  Terminal B 
Termination
ISDN/C.O. Line CCIS Line
  Terminal A
  PBX   PBX 
  Terminal A 
Termination
  Terminal B
  PBX  

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 255
Call Return C-151
Service Conditions (cont’d)
CCIS Call:
c.) When the station answers a call held on Multi Line, the calling number/calling station number
cannot be saved (Held Line is not My Line). When the call is terminated at the trunk, the calling
number is saved in the ELC card only.
3. Calling number can be saved for station-to-station call via the system data assignment (see Programming).
Note:When the incoming call is terminated...

NEAX2400 IPX Feature Programming ManualPage 256NDA-24297, Issue 1
C-151 Call Return
Service Conditions (cont’d)
8. Service Conditions for Automatic Saving with the access code:
a.) This service is available for the telephone corresponding with Caller-ID service. Equips Caller ID
function or the telephone using Caller ID adapter.
b.) This service is not available when a call is terminated to an ISDN terminal or a PS terminal.
c.) The last calling number is stored in the data memory.
d.) Even when the...

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 257
Call Hold Pick Up C-154
C-154  Call Hold Pick Up
General Description
This feature allows a user to pick up a trunk or station call that is put on hold by a second user. The user can
accomplish this by dialing an access code followed by the telephone number that is holding the call.
Operating Procedure
1. Make a trunk or station call to Station A.
2. Station A places the call in progress on hold.
3. From Station B, dial the access code and...