NEC Neax 2400 Ipx Feature Programming Manual

NEAX2400 IPX Feature Programming ManualPage 148NDA-24297, Issue 1
C-7 Call Pickup - Group
Interactions (cont’d)
9. Stations denied access to a route via Route Restriction Class may not use CALL PICKUP GROUP to
answer restricted incoming trunk calls.
10. CALL PICKUP GROUP is not available for AUTOMATIC/MANUAL INTERCOM [A-30] or DIAL
INTERCOM [D-87] calls.
11. If more than one station line in a CALL PICKUP GROUP is ringing, the individual call answered is
selected by the system. The system priority is...

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 149
Call Pickup - Group C-7
FCCS Programming (cont’d)
When Entering Data via LDM
STEP 1:ANPDL- Assign 1st digit code (1st DC) and number of necessary digits (NND) for feature access and
cancel. CI = N (Normal).
STEP 2:ASPAL- Assign access code for CALL PICKUP, CI=N, SRV=SSC, SID=7 (CALL PICKUP -
GROUP). If necessary, assign SRV=SSCA, SIDA=63 (CALL PICKUP EXPAND GROUP).
STEP 3:ACP GL- Assign members of CALL PICKUP GROUP.
UGN: User Group Number...

NEAX2400 IPX Feature Programming ManualPage 150NDA-24297, Issue 1
C-7D Call Pickup - Group - Dterm
C-7D  Call Pickup - Group - Dterm
General Description
This feature permits a user to answer any call directed to another line in his preset CALL PICKUP - GROUP by
using a programmable line/feature key.
CALL PICKUP - GROUP - D
termmay be used by seizing dial tone from any multi-line appearance on the Dterm.
A user can be assigned to an additional CALL PICKUP GROUP, referred to as EXPANDED CALL PICKUP
GROUP....

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 151
Call Pickup - Group - DtermC-7D
Service Conditions (cont’d)
6. CALL TRANSFER - ALL CALLS: The capability to pick up the recall of CALL TRANSFER - ALL
CALLS when CALL PICKUP - GROUP is activated, is not available.
7. There is no limit to the number of groups per system.
8. A user cannot pick up a call in the EXPANDED CALL PICKUP GROUP when engaged in another call.
9. The allowable station number type for a member of CALL PICKUP GROUP or...

NEAX2400 IPX Feature Programming ManualPage 152NDA-24297, Issue 1
C-7D Call Pickup - Group - Dterm
Service Conditions (cont’d)
14. The number of the CALL PICKUP GROUP or CALL PICKUP EXPAND GROUP is not limited.
15. A user cannot answer an incoming call to the station in another CALL PICKUP GROUP or CALL
PICKUP EXPAND GROUP.
16. Even if a station has been assigned to the existing CALL PICKUP GROUP or CALL PICKUP EXPAND
GROUP by Physical Station Number, the station can also be assigned to the same CALL...

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 153
Call Pickup - Group - DtermC-7D
Service Conditions (cont’d)
f.) No limitation is attached to the number of CALL PICKUP GROUP/CALL PICKUP EXPAND
GROUP per node.
g.) When multiple stations are ringing in a CALL PICKUP GROUP/CALL PICKUP EXPAND
GROUP, the calls won’t be picked up in the terminated order or in the assigned order of stations
on the command ACPGL.
h.) A station cannot pick up a call to a member of other CALL PICKUP GROUP/CALL...

NEAX2400 IPX Feature Programming ManualPage 154NDA-24297, Issue 1
C-7D Call Pickup - Group - Dterm
Programming
STEP 1:ANPD- Reserve a number level for feature access and cancel. Assign for Normal (N), Hooking (H)
and Busy (B). Assign NND in accordance with a predetermined numbering plan.
STEP 2:ASPA- Assign an access code for the CALL PICKUP GROUP, SID = 7 and the CALL PICKUP
EXPAND, SIDA=63 (if necessary) for Connection Status Index (CI) of Normal (N) and Hooking (H).
STEP 3:ACP G- Assign members of...

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 155
Call Pickup - Group - DtermC-7D
FCCS Programming (cont’d)
STEP 3:ACP GL- Assign members of CALL PICKUP GROUP.
UGN: User Group Number = 1 (fixed)
TELN: Telephone Number of member stations
STEP 4:ACP EL- Assign members of CALL PICKUP EXPAND GROUP (if necessary).
UGN: User Group Number = 1 (fixed)
TELN: Telephone Number of member stations
STEP 5:AKYD - Optional. Assign a programmable Line/Feature key as a CALL PICKUP key. KYI=1
(Feature...

NEAX2400 IPX Feature Programming ManualPage 156NDA-24297, Issue 1
C-8 Call Processing Indication
C-8 Call Processing Indication
General Description
This feature provides visual indications at the ATTENDANT CONSOLE [A-3] of all calls being handled by the
Attendant.
Operating Procedure
None.
Service Conditions
Each ATTENDANT CONSOLE [A-3] is provided with 6 dedicated switched loop keys. Each loop key is associated
with 5 lamp indicators (BUSY, RING, ATND, ANSWER, or HOLD) to display the status of the call...

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 157
Call Queueing C-9
C-9 Call Queueing
General Description
This feature enables an Attendant to handle a series of exchange network calls in the order of their arrival,
eliminating unnecessary delays.
Operating Procedure
Press ATTENDANT CONSOLE [A-3] ANSWER key to receive calls in order of queue.
Service Conditions
1. Incoming calls arriving at the Attendant Console will light the CALL WAITING LAMP [C-13].
2. When an incoming call lights an...