NEC Neax 2400 Ipx Feature Programming Manual

NEAX2400 IPX Feature Programming ManualPage 98NDA-24297, Issue 1
B-12 Brokerage Hotline - Outside
Service Conditions (cont’d)
15. The station, the Attendant Console / Desk Console (operator call), and the trunk can be a destination for
Hotline.
16. When Call Forwarding - All Calls/Busy Line/Don’t Answer service has been set to the called station, these
features are available for the call to the station.
17. When a calling party encounters a busy station, the call may bridge into the connection, depending...

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 99
Brokerage Hotline - Outside B-12
Programming (cont’d)
2: Multi-line Key
KD: 0
RG: Ringing Assignment per multi-line appearance
0: No ringing
1: Ringing in Day mode only
2: Ringing in Night mode only
3: Ringing in Day and Night mode
FCCS Programming 
This data setting describes only the additional or replacement commands used to activate FCCS
services. When used as an FCCS feature, these commands replace the non-network commands (for...

NEAX2400 IPX Feature Programming ManualPage 100NDA-24297, Issue 1
B-17 Blind Transfer To Attendant
B-17  Blind Transfer To Attendant
General Description
This feature allows a station to transfer a held call (station or trunk) to the Attendant Console and hang up without
having to wait for the Attendant to answer.
Operating Procedure
1. While connected to another party (station or trunk), the user presses switch hook or TRANSFER key;
receives special dial tone.
2. User dials the access code for operator;...

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 101
Blind Transfer To Attendant B-17
Programming
STEP 1:ASYD- System 1, Index 17, Bit 4: (1) Blind Transfer to Attendant In Service.
System Data 2, Index 1, Bit 0 and Bit 1: (1).
STEP 2:ASFC- Cancel the restriction of Blind Transfer to Attendant from SFC of the station.
(SFI = 103, RES = 1).
STEP 3:ANPD- 0 = Hooking (H) NND = 1.
STEP 4:ASPA- 0 = Hooking (H) SRV = SSC (Service Code), SID = 2.
FCCS Programming 
This data setting describes only...

NEAX2400 IPX Feature Programming ManualPage 102NDA-24297, Issue 1
B-18 BlindTransferToStation
B-18  Blind Transfer To Station
General Description
This feature allows two Class Marks to be assigned to stations, enabling services such as Voice Mail, announcement
machine, etc. depending on the Class Mark.
1. A Class Mark which allows No Answer timer to be extended when the Blind Transferred-to station does
not answer within the predetermined period of time interval.
2. A Class Mark which activates CALL...

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 103
BlindTransferToStation B-18
Programming
STEP 1:ASYD- System 1, Index 69, Bit 0:
Processing for a case where the transfer destination station does not answer the call within a
predetermined period of time. 0/1 = the transferring station is recalled/the transfer destination station is
continuously rung, or if the Call Forwarding - Don’t Answer is set at the destination station, Call
Forwarding - Don’t Answer is executed. Index 247: Assign...

NEAX2400 IPX Feature Programming ManualPage 104NDA-24297, Issue 1
C-1 Call Back
C-1 Call Back
General Description
This feature provides the ability for a calling station that has dialed a busy station to dial a CALL BACK code. When
this has been done, the calling station will be rung as soon as the busy station becomes available, provided the calling
stationisalsoidle.
Operating Procedure
To set
1. Dial the desired telephone number; receive busy tone.
2. Press switch hook for special dial tone.
3. Dial...

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 105
Call Back C-1
Interactions (cont’d)
2. ASYD - System Data 1, Index 139, No Answer Timer is also used for station-to-station call, DID, or TIE
Line call for CALL FORWARDING - DON’T ANSWER [C-3], and CALL HOLD [C-6].
3. CALL WAITING - ORIGINATE [C-31] automatic setting and CALL BACK are mutually exclusive.
4. CALL HOLD [C-6]: Activation of CALL BACK is not allowed if the calling or called station has a party
on CALL HOLD [C-6]. CALL BACK...

NEAX2400 IPX Feature Programming ManualPage 106NDA-24297, Issue 1
C-1 Call Back
FCCS Programming (cont’d)
STEP 2:ASPAL- Assign an access code to CALL BACK - Entry, SRV = SSC (Service Code), SID = 3 and a
Connection Status Index (CI) for Busy (B) service. For CALL BACK - Cancel, SRV = SSC (Service
Code), SID = 6. Assign a Connection Status Index (CI) for Normal (N) service.
Note 1:When using ASYDL or ASYDN to program an FCCS feature, the basic programming of ASYD is required
in addition to ASYDL or...

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 107
Call Back - DtermC-1D
C-1D  Call Back - Dterm
General Description
This feature provides the ability for a Dterm, which has dialed a busy station, to press a CALL BACK key. When
this has been done, the calling station will be rung as soon as the busy station becomes available, provided that the
calling station is also free.
Operating Procedure
To set
1. Dial desired telephone number; receive busy tone.
2. Press the CALL BACK key; receive...