NEC Neax 2400 Ipx Feature Programming Manual

NEAX2400 IPX Feature Programming ManualPage 118NDA-24297, Issue 1
C-2D Call Forwarding - Busy Line - Dterm
Service Conditions (cont’d)
b.) When the calling party is the attendant console or the night station, and the destination of the
CALL FORWARDING - BUSY LINE service is also the attendant console or the night station.
26. SPLIT CALL FORWARDING [S-99] is available only when the calling party is the station or the CCIS
line.
27. The OAI monitor number and the ACD pilot number cannot be assigned as the...

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 119
Call Forwarding - Busy Line - DtermC-2D
Programming
STEP 1:ASYD- System Data 1, Index 5, Bit 0. Access codes for CALL FORWARDING BUSY LINE - Dterm
and CALL FORWARDING - DON’T ANSWER [C-3] are same or separate? 0/1: Same/Separate.
System Data 1, Index 69, Bit 5, Index 69, Bit 7.
STEP 2:ANPD- Reserve a number level for feature access and cancel. Assign for Normal (N), Hooking (H),
and BUSY (B). Assign NND in accordance with a predetermined...

NEAX2400 IPX Feature Programming ManualPage 120NDA-24297, Issue 1
C-3 Call Forwarding - Don’tAnswer
C-3  Call Forwarding - Don’t Answer
General Description
This feature permits a call to an unanswered station to be forwarded to a predesignated station, or to the Attendant,
when the called station doesnt answer after a predetermined time interval. If the individual Call Forwarding - Don’t
Answer timer is not assigned, the default timer assigned by system data programming is used.
Operating Procedure
To...

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 121
Call Forwarding - Don’tAnswer C-3
Service Conditions (cont’d)
5. There is no limitation to the number of stations that can set the CALL FORWARDING - DONT
ANSWER simultaneously.
6. CALL FORWARDING - DONT ANSWER can be provided on either a tenant or an individual basis.
7. Individual CALL FORWARDING - DONT ANSWER takes precedence over tenant basis Call
Forwarding.
8. Call Forwarding on a tenant basis allows direct incoming trunk calls that...

NEAX2400 IPX Feature Programming ManualPage 122NDA-24297, Issue 1
C-3 Call Forwarding - Don’tAnswer
Service Conditions (cont’d)
20. When a call is forwarded through FCCS link, the numbering plan of the originally called station must be
identical with the one of the forwarded Attendant Console.
21. If individual Call Forwarding - Don’t Answer timer is not given, the default timer assigned by ASYD
command is used.
Interactions
1. If access codes for CALL FORWARDING-BUSY LINE and CALL FORWARDING-DON’T...

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 123
Call Forwarding - Don’tAnswer C-3
Programming (cont’d)
System Data 1, Index 141. Assign the No Answer timer for incoming calls via the Attendant console. It
will then be forwarded to the next station according to SYS1, Index 145 timer. For 10 seconds, assign
00H. [RAM data is 35H.]
System Data 1, Index 145. Assign the time an incoming call via the Attendant Console will ring at the
CALL FORWARDING-DON’T ANSWER station before recalling to...

NEAX2400 IPX Feature Programming ManualPage 124NDA-24297, Issue 1
C-3D Call Forwarding - Don’tAnswer-Dterm
C-3D  Call Forwarding - Don’t Answer - Dterm
General Description
This feature permits a call to an unanswered station to be forwarded to a predesignated station or to the Attendant,
if the called station does not answer within a predetermined period of time. CALL FORWARDING - DONT
ANSWER - D
termmay be set or cancelled by the user for all multi-line appearances on the Dterm. Additionally, a
single...

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 125
Call Forwarding - Don’tAnswer-DtermC-3D
Operating Procedure (cont’d)
5. If the target station is the Attendant, the LCD displays:
To monitor CALL FORWARDING - DONT ANSWER for a multi-line appearance other than the MY Line
1. Press the CALL FORWARDING - DONT ANSWER FORWARD-NA key. The LCD displays:
Target Station 
To cancel CALL FORWARDING - DONT ANSWER from MY Line
1. Lift the handset or press the SPEAKER key; receive dial tone.
2. Press...

NEAX2400 IPX Feature Programming ManualPage 126NDA-24297, Issue 1
C-3D Call Forwarding - Don’tAnswer-Dterm
Service Conditions (cont’d)
7. CALL FORWARDING - DONT ANSWER - Dtermmay also be accessed via the dial pad or SPEED
CALLING - ONE TOUCH - Dterm[S-26D]. If this feature is accessed via the dial pad, it must be cancelled
via the dial pad.
8. CALL FORWARDING - DONT ANSWER - D
termis not applicable to CONSULTATION HOLD - ALL
CALLS [C-17], and CALL TRANSFER - ALL CALLS [C-11].
9. A user may set CALL...

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 127
Call Forwarding - Don’tAnswer-DtermC-3D
Service Conditions (cont’d)
12. Stations are assigned this feature according to TENANT SERVICE [T-12] of the calling and destination
stations, when the called station does not answer for a predetermined time interval. In the following cases,
when the calling or destination stations are restricted by TENANT SERVICE [T-12] class, this feature is
not activated, and the called station continues to...