NEC Neax 2400 Ipx Feature Programming Manual

NEAX2400 IPX Feature Programming ManualPage 78NDA-24297, Issue 1
B-2 Busy Lamp Field - Flexible
B-2  Busy Lamp Field - Flexible
General Description
This feature provides the Attendant with visual indications of either busy, idle or LINE LOCKOUT [L-3] conditions
for a particular group of stations via a designated lamp field on the Attendant Console or the dial pad on the desk
console.
Operating Procedure
1. Press an idle loop key.
2. Key in thousands (where applicable) and hundreds digit(s) of the desired...

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 79
Busy Lamp Field - Flexible B-2
Interactions
1. CENTRALIZED ATTENDANT SERVICE (CAS) [C-20]: At the CAS main location, when the
ATTENDANT CONSOLE [A-3] is handling a call from a CAS branch over a Release Line Trunk (RLT),
the BLF will give no indication of busy/idle status of branch location stations.
2. The BLF indicates the station status after the hundreds digit is keyed in by the Attendant.
3. A 2-digit digital display indicator is used...

NEAX2400 IPX Feature Programming ManualPage 80NDA-24297, Issue 1
B-2 Busy Lamp Field - Flexible
Programming (cont’d)
STEP 5:ANPD/ANPDN- Assign the Busy Lamp Field Display Activation on an Attendant Console (BLF).
1ST DC: Dial Code (Station Number)
BLF = 1 (BLF is in service)
Note:Use ANPDN for IPX-U; Use ANPD for IPX-UMG. 

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 81
Busy Verification B-3
B-3 Busy Verification
General Description
When an Attendant places a call to a busy station, this feature allows the Attendant to break into the connection.
When this feature is initiated from the console, the system sends a Warning Tone to the stations before establishing
a three-party conference. Additionally, the Attendant Monitor Function can be activated depending on system data.
Operating Procedure
To activate...

NEAX2400 IPX Feature Programming ManualPage 82NDA-24297, Issue 1
B-3 Busy Verification
Service Conditions (cont’d)
PRIVACY RELEASE [P-18]
THREE-WAY CALLING [T-2, T-2D]
VOICE CALL - D
term[V-2D]
f.) Modem pooling connection
g.) Data Call through Data Adapter
h.) Data Call through Data Module
i.) The calling station is connected to an Attendant Loop
Note:In each of the above instances, the Attendant will receive reorder tone.
3. Before the Attendant is added to an existing connection, a two-burst tone is...

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 83
Busy Verification B-3
Service Conditions (cont’d)
14. CALL WAITING [C-12, 31]: If an Attendant attempts to busy-verify a station line that already has a
waiting call, BUSY VERIFICATION will be denied. Also, if the Attendant attempts to busy-verify a
station line that is waiting for another line, the BUSY VERIFICATION attempt will be temporarily
denied, because such waiting calls always involve either a connection to the Attendant position...

NEAX2400 IPX Feature Programming ManualPage 84NDA-24297, Issue 1
B-3 Busy Verification
Interactions (cont’d)
7. DATA LINE SECURITY [D-12]: An Attendant cannot busy-verify a busy station line that has a DATA
LINE SECURITY [D-12] Class of Service. If BUSY VERIFICATION is attempted, the Attendant will
hear the reorder tone.
8. CALL WAITING [C-12, 31]: If an Attendant attempts to busy-verify a station line that already has a
Waiting call, BUSY VERIFICATION will be denied. Also, if the Attendant attempts to...

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 85
Boss - Secretary Override - DtermB-5D
B-5D  Boss - Secretary Override - Dterm
General Description
This feature enables a secretary to voice announce a call to a boss when he is currently on his My-Line.
Operating Procedure
Station 200 - Boss
Station 201 - Secretary
Boss is currently connected to Trunk A. Call at Trunk B, intended for 200, reroutes to Station 201
1. Secretary answers station 201.
2. Secretary asks the caller to hold and...

NEAX2400 IPX Feature Programming ManualPage 86NDA-24297, Issue 1
B-5D Boss - Secretary Override - Dterm
Service Conditions (cont’d)
4. This feature must be allowed in CLASS OF SERVICE - INDIVIDUAL [C-15] via system data
programming.
5. BOSS-SECRETARY OVERRIDE is denied if the boss is connected to the ATTENDANT CONSOLE.
6. If provided in the system, the held caller will hear MUSIC ON HOLD [M-7].
7. The call is recorded in SMDR for the secretarys station (e.g., 201).
8. This feature is denied to a UCD...

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 87
Boss - Secretary Override - DtermB-5D
Programming (cont’d)
STEP 5:AKYD- Optional. Assign to a programmable Line/Feature key a CALL HOLD [C-6] key. Assign
Type:Function:CALL HOLD [10]. (The operation of TRANSFER key and access code is also
available.) Optional. Assign to a programmable Line/Feature key a CALL WAITING -
ORIGINATING [C-31] key. Assign Type:Function:CALL WAITING [4]. (The operation of
TRANSFER key and access code is also...