NEC Neax 2400 Imx System Operations And Maintenance Manual
Here you can view all the pages of manual NEC Neax 2400 Imx System Operations And Maintenance Manual. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 121
CHAPTER 3 NDA-24238 Pag e 9 4 Revision 3.0 SYSTEM MESSAGES When type of connection is ACD Trunk connection ➁ ACD Trouble Kind Note 1:When “(ACD Trouble Kind)” is 01 Hex: ➂-➅ Information on Calling Party (a) Station (b) Trunk My Line No. Route No. + Trunk No. ➆ ➇ Not Used ➈ ➉ Information on Calling Party Refer to ➂~➅ Information on Held Party or 3rd Station/Trunk in 3-Party Connection Refer to ➂~➅ Note 2:When “(ACD Trouble Kind)” is 14 Hex: ➂ Issue of ACDP (First digit of decimal place) ➃ Issue of ACDP...
Page 122
NDA-24238 CHAPTER 3 Page 95 Revision 3.0 SYSTEM MESSAGES Note 4: When “(ACD Trouble Kind)” is 24 or 99 Hex: ➂~➅Not used ➆ ➇Error Counter Note 5:When “(ACD Trouble Kind)” is 30 Hex: ➂~➅Pointer Address ➆Not used ➇Error Kind Note 6:When “(ACD Trouble Kind)” is 33 Hex: ➂ACDP Data Memory 00 = Used 01 = Not used ➃ACDP System Capacity 02 = 50 Agent Positions 04 = 200 Agent Positions 07 = 500 Agent Positions 12 = 900 Agent Positions 15 = 2,000 Agent Positions Note:If other data is output, the ACD system may not...
Page 123
CHAPTER 3 NDA-24238 Pag e 9 6 Revision 3.0 SYSTEM MESSAGES This message displays to indicate the result of a designated connection test (Individual Trunk Access) from a station. ➀Test Item (b0-b3 is valid only for Outgoing trunk test) 1: XXXX XXXX XXXX XXXX 2: XXXX 00XX XXXX XXXX 3: XXXX XXXX XXXX XXXX ➀ ➁ ➂ ➃ ➄ ➅ ➆ ➇ ➈ ➉ 4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000 7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000 b7 b6 b5 b4 b3 b2 b1 b0 Default Alarm:...
Page 124
NDA-24238 CHAPTER 3 Page 97 Revision 3.0 SYSTEM MESSAGES ➁ ➂-➄ Station number of testing station (see table) ➅ Te n a n t N o . ➆ OPTN data b7 b6 b5 b4 b3 b2 b1 b0 b7 b3 b2 b1 b0 b7 b3 b2 b1 b0 b0-b3: Number of digits of the testing station No. b4-b7: Error Numbers (see table below) Error Numbers and Their Meanings ERROR NO. MEANING 0--- 1 The testing station is restricted from activating the service. 2 Route Number Error of the designated trunk 3 Trunk Number Error of the designated trunk 4 Trunk...
Page 125
CHAPTER 3 NDA-24238 Pag e 9 8 Revision 3.0 SYSTEM MESSAGES ➇ Tested Route No. Note:When Logical Routes are assigned, Logical Route Numbers are displayed here. ➈ OPRT data Note:When Logical Routes are assigned, Logical Route Numbers are displayed here. ➉ (This data is not for Ringing Signal Te s t ) Digit of Dialed Number (for test ) Dialed Number (for test) (a) Dialed Number sent by the test Trunk/Sender b7 b6 b5 b4 b3 b2 b1 b0 b7 b6 b5 b4 b3 b2 b1 b0 b7 b6 b5 b4 b3 b2 b1 b0 b7 b4 b3 b2 b1 b0 b7 b6 b5...
Page 126
NDA-24238 CHAPTER 3 Page 99 Revision 3.0 SYSTEM MESSAGES This message displays when a call terminates to the Emergency Telephone. ➀ - ➅ Called Station (Emergency Telephone) No. (ASCII Code) ➆ - Calling Station No. (ASCII Code) 1: XXXX XXXX XXXX XXXX 2: XXXX XXXX 0000 0000 3: 0000 0000 0000 0000 ➀ ➁ ➂ ➃ ➄ ➅ ➆ ➇➈ ➉ 4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000 7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000 b7 b6 b5 b4 b3 b2 b1 b0 b7 b6 b5 b4 b3 b2 b1 b0...
Page 127
CHAPTER 3 NDA-24238 Page 100 Revision 3.0 SYSTEM MESSAGES This message displays when the LCR-Attendant Manual Override is set at the Attendant Desk Console. ➀ Route Selection Time Pattern No. assigned at Attendant Desk Console Note:Route Selection Time Pattern 0-7 corresponds to TDPTN No. 0-7 in the AOPR command. 1: XX00 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000 ➀ 4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000 7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9:...
Page 128
NDA-24238 CHAPTER 3 Page 101 Revision 3.0 SYSTEM MESSAGES This message displays when the LCR-Attendant Manual Override is cancelled at the Attendant Desk Console. ➀ Suspension of Emergency Control Note:Route Selection Patterns 0-7 corresponds to TDPTN No. 0-7 in the AOPR command. 1: XX00 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000 ➀ 4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000 7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000 b7 b0 Default...
Page 129
CHAPTER 3 NDA-24238 Page 102 Revision 3.0 SYSTEM MESSAGES This message displays when the system detects abnormal duration in the line connection between the calling and called party. When the calling and called party establish a line connection and continue the hook-up for an extremely short or long period of time (predetermined by the ASYD command (SYS1 Index 45, 46)), this mes- sage is created. ➀ Calling party information ➁ Tenant No. of Calling/Called party (Hex.) ➂ Calling party Information When...
Page 130
NDA-24238 CHAPTER 3 Page 103 Revision 3.0 SYSTEM MESSAGES When calling party is ATTCON/DESKCON Attendant/Desk console No. (See table.) When calling party is Trunk Route No. and Trunk No. (See table.) Note: Route No. (a) Route No. (b) ➃ Called party information b7 b6 b5 b4 b3 b2 b1 b0 b7 b6 b5 b4 b3 b2 b1 b0 b7 b3 b2 b1 b0 b7 b3 b2 b1 b0 b4- b7b0-b3 DC0 DC1 b0-b7 (a) Route No. (Hex) Note (b) Route No. (Hex) Note (c) Trunk No. (Hex) (d) Trunk No. (Hex) b0-b5: Route No. (1-63) b6: OP 0/1 = Data in OPRT...