NEC Neax 2400 Imx System Operations And Maintenance Manual
Here you can view all the pages of manual NEC Neax 2400 Imx System Operations And Maintenance Manual. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 101
CHAPTER 3 NDA-24238 Pag e 7 4 Revision 3.0 SYSTEM MESSAGES This message displays when a wire of the line between the LC circuit card and the telephone set is short- circuited with ground. ➀ Location of faulty circuit card ➁ Location of faulty circuit card Note:This message displays when the specific LC card providing the above function is used. 1: XXXX 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000 ➀ ➁ 4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000 7: 0000 0000 0000...
Page 102
![Page 102
NDA-24238 CHAPTER 3
Page 75
Revision 3.0
SYSTEM MESSAGES
This message displays when the DTI card detects an abnormal state of a digital line but this failure has no in-
fluence on the speech path. When the status worsens, the system issues [3-I] Digital Line Failure message.
➀ Location of PM (LENS) with a
fault
➁ Kind of fault
➂ Time Slot No. of fault (This data is
valid only when the kind of fault is
08H.)
1: XXXX XX00 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
➀ ➁ ➂
4: 0000 0000 0000...](http://img.usermanuals.tech/thumb/54/84348/w300_nec-neax2400-imx-system-operations-and-maintenance-manual_d-101.png "Page 102
NDA-24238 CHAPTER 3
Page 75
Revision 3.0
SYSTEM MESSAGES
This message displays when the DTI card detects an abnormal state of a digital line but this failure has no in-
fluence on the speech path. When the status worsens, the system issues [3-I] Digital Line Failure message.
➀ Location of PM (LENS) with a
fault
➁ Kind of fault
➂ Time Slot No. of fault (This data is
valid only when the kind of fault is
08H.)
1: XXXX XX00 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
➀ ➁ ➂
4: 0000 0000 0000...")
NDA-24238 CHAPTER 3 Page 75 Revision 3.0 SYSTEM MESSAGES This message displays when the DTI card detects an abnormal state of a digital line but this failure has no in- fluence on the speech path. When the status worsens, the system issues [3-I] Digital Line Failure message. ➀ Location of PM (LENS) with a fault ➁ Kind of fault ➂ Time Slot No. of fault (This data is valid only when the kind of fault is 08H.) 1: XXXX XX00 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000 ➀ ➁ ➂ 4: 0000 0000 0000...
Page 103
![Page 103
CHAPTER 3 NDA-24238
Pag e 7 6
Revision 3.0
SYSTEM MESSAGES
This message displays after [3-H] Digital Line Warning lasts in the DTI card over the particular time. This
failure may cause a speech path fault to the DTI card.
➀ Location of faulty PM
➁ Kind of fault
➂ Location of faulty circuit card (This
data is valid when
➁ is 0FH)
➃ Location of faulty circuit card (This
data is valid when
➁ is 0FH)
1: XXXX 0000 XXXX XXXX 2: XXXX XXXX XXXX XXXX 3: XXXX XXXX XXXX XXXX
➀ ➁ ➂ ➃ ➂ ➃ ➂ ➃ ➂ ➃ ➂ ➃ ➂ ➃ ➂ ➃ ➂ ➃...](http://img.usermanuals.tech/thumb/54/84348/w300_nec-neax2400-imx-system-operations-and-maintenance-manual_d-102.png "Page 103
CHAPTER 3 NDA-24238
Pag e 7 6
Revision 3.0
SYSTEM MESSAGES
This message displays after [3-H] Digital Line Warning lasts in the DTI card over the particular time. This
failure may cause a speech path fault to the DTI card.
➀ Location of faulty PM
➁ Kind of fault
➂ Location of faulty circuit card (This
data is valid when
➁ is 0FH)
➃ Location of faulty circuit card (This
data is valid when
➁ is 0FH)
1: XXXX 0000 XXXX XXXX 2: XXXX XXXX XXXX XXXX 3: XXXX XXXX XXXX XXXX
➀ ➁ ➂ ➃ ➂ ➃ ➂ ➃ ➂ ➃ ➂ ➃ ➂ ➃ ➂ ➃ ➂ ➃...")
CHAPTER 3 NDA-24238 Pag e 7 6 Revision 3.0 SYSTEM MESSAGES This message displays after [3-H] Digital Line Warning lasts in the DTI card over the particular time. This failure may cause a speech path fault to the DTI card. ➀ Location of faulty PM ➁ Kind of fault ➂ Location of faulty circuit card (This data is valid when ➁ is 0FH) ➃ Location of faulty circuit card (This data is valid when ➁ is 0FH) 1: XXXX 0000 XXXX XXXX 2: XXXX XXXX XXXX XXXX 3: XXXX XXXX XXXX XXXX ➀ ➁ ➂ ➃ ➂ ➃ ➂ ➃ ➂ ➃ ➂ ➃ ➂ ➃ ➂ ➃ ➂ ➃...
Page 104
NDA-24238 CHAPTER 3 Page 77 Revision 3.0 SYSTEM MESSAGES This message displays when a digital line fault is restored. ➀ Location of faulty line 1: XX00 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000 ➀ 4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000 7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000 b7 b6 b5 b4 b3 b2 b1 b0 Default Alarm: NON3-JDigital Line RestoreDefault Grade: 0Grade Modified: Lamp Modified: b0-b4: Group No. b5, b6: Unit No. (0-3)...
Page 105
CHAPTER 3 NDA-24238 Pag e 7 8 Revision 3.0 SYSTEM MESSAGES This message displays when a Ready Failure occurs in both systems as a result of the TSW card having a failure or the card is not mounted properly. ➀Unit and MG number of fault detection Reference: See Chapter 5, Section 5.3, for the repair procedure. 1: XX00 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000 ➀ 4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000 7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000...
Page 106
NDA-24238 CHAPTER 3 Page 79 Revision 3.0 SYSTEM MESSAGES This message displays when a Ready Failure occurs in one of the dual systems because the TSW card fails or the card is not mounted properly. ➀Unit and MG number of fault detection Reference: See Chapter 5, Section 5.4, for the repair procedure. 1: XX00 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000 ➀ 4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000 7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000...
Page 107
CHAPTER 3 NDA-24238 Pag e 8 0 Revision 3.0 SYSTEM MESSAGES This message displays when I/O Ready Failure occurs on a DLKC card. ➀Details on faulty DLKC card 1: XX00 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000 ➀ 4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000 7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000 b7 b0 Default Alarm: MN4-QDLKC Ready FailureDefault Grade: 3Grade Modified: Lamp Modified: b0: 0/1 = No. 0 system/No. 1 system b7: 0/1 = ACT/STBY
Page 108
NDA-24238 CHAPTER 3 Page 81 Revision 3.0 SYSTEM MESSAGES This message displays when the MUX (PH-PC36) card has a Ready Failure in one of the dual systems. When the card is not ready for service function because of the failure or because the card is not mounted properly, the system creates this message. ➀Unit and MG number for MUX card with ready fault ➁MG and system number for faulty MUX card Reference: See Chapter 5, Section 4.3 and Section 4.4, for the repair procedure. 1: XXXX 0000 0000 0000 2: 0000...
Page 109
CHAPTER 3 NDA-24238 Pag e 8 2 Revision 3.0 SYSTEM MESSAGES This message displays when the MUX (PH-PC36) card has a Ready Failure in both of the dual systems. When the card is not ready for service function because of the failure or because the card is not mounted properly, the system creates this system message. ➀Unit and MG number for MUX card with the ready fault ➁MG and system number for faulty MUX card Note 1:Though this message indicates the Ready Failure in both systems, the information displayed...
Page 110
NDA-24238 CHAPTER 3 Page 83 Revision 3.0 SYSTEM MESSAGES This message displays when a PCI card failure occurs. ➀ Fault detection on PCI card ➁ Error status on PCI slot 0 ➂ Error status on PCI slot 1 ➃ Not used 1: 0X0X 0X0X 0X00 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000 ➀ ➁ ➂ ➃ ➄ 4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000 7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000 b7 b3 b2 b1 b0 b7 b1 b0 b7 b1 b0 Default Alarm: MN4-UPCI Card FailureDefault...