Home > NEC > Communications System > NEC Neax 2400 Imx System Operations And Maintenance Manual

NEC Neax 2400 Imx System Operations And Maintenance Manual

Here you can view all the pages of manual NEC Neax 2400 Imx System Operations And Maintenance Manual. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 141

CHAPTER 3 NDA-24238
Page 114
Revision 3.0
SYSTEM MESSAGES
This message displays when the MBR switch on the TSW card is turned ON at CPU changeover or speech path
changeover.
➀ System status of TSW card
1: XX00 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
➀ 
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b7 b0
Default Alarm:
NON7-ETSW MBR Key Turn ONDefault Grade:
3Grade Modified: Lamp Modified:
b0:...

Page 142

NDA-24238 CHAPTER 3
Page 115
Revision 3.0
SYSTEM MESSAGES
This message displays when the MBR switch on the TSW card is turned OFF at CPU changeover or speech
path changeover.
➀ System status of TSW card
1: XX00 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
➀ 
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b7 b0
Default Alarm:
NON7-FTSW MBR Key Turn OFFDefault Grade:
3Grade Modified: Lamp Modified:...

Page 143

CHAPTER 3 NDA-24238
Page 116
Revision 3.0
SYSTEM MESSAGES
This message displays when the PLO MBR switch is turned ON (UP).
➀ Information on PLO MBR 
operation
1: XX00 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
➀ 
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b7 b0
Default Alarm:
NON7-GTSW PLO Key Turn ONDefault Grade:
3Grade Modified: Lamp Modified:
b0: 0/1=System 0/System 1 

Page 144

NDA-24238 CHAPTER 3
Page 117
Revision 3.0
SYSTEM MESSAGES
This message displays when the PLO MBR switch is turned OFF (DOWN).
➀ Information on PLO MBR 
operation
1: XX00 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
➀ 
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b7 b0
Default Alarm:
NON7-HTSW PLO Key Turn OFFDefault Grade:
3Grade Modified: Lamp Modified:
b0: 0/1=System 0/System 1 

Page 145

CHAPTER 3 NDA-24238
Page 118
Revision 3.0
SYSTEM MESSAGES
This message displays when the MB switch on the EMA card is turned ON while extracting or inserting a 
circuit card or at PM initialization. This message displays with the [7-J]: ALMC MB Key Turn OFF message.
➀ Frame No. and its kind
1: XX00 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
➀ 
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b7 b6...

Page 146

NDA-24238 CHAPTER 3
Page 119
Revision 3.0
SYSTEM MESSAGES
This message displays when the MB switch on the EMA card is turned OFF while extracting or inserting a
circuit card or at PM initialization.
➀ Frame No. and its kind
1: XX00 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
➀ 
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b7 b6 b5 b4 b3 b2 b1 b0
Default Alarm:
NON7-JALMC MB Key Turn OFFDefault...

Page 147

CHAPTER 3 NDA-24238
Page 120
Revision 3.0
SYSTEM MESSAGES
This message displays when the MB switch on the line/trunk card is turned ON while extracting or inserting a
circuit card or at PM initialization.
➀ Location of faulty Line/Trunk card
1: XX00 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
➀ 
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b7 b6 b5 b4 b3 b2 b1 b0
Default Alarm:
NON7-KPM MB Key...

Page 148

NDA-24238 CHAPTER 3
Page 121
Revision 3.0
SYSTEM MESSAGES
This message displays when the MB switch on the line/trunk card is turned OFF while extracting or inserting
a circuit card or at PM initialization.
➀ Location of faulty Line/Trunk card
1: XX00 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
➀ 
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b7 b6 b5 b4 b3 b2 b1 b0
Default Alarm:
NON7-LPM MB Key...

Page 149

CHAPTER 3 NDA-24238
Page 122
Revision 3.0
SYSTEM MESSAGES
This message displays when the MB switch on the PFT card is turned ON while extracting or inserting a circuit
card, or at PM initialization.
➀ Faulty PFT card No.
➁ Location of faulty PFT card
1: XXXX 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
➀ ➁
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b7 b2 b1 b0
b7 b6 b5 b4 b3 b2 b1 b0
Default...

Page 150

NDA-24238 CHAPTER 3
Page 123
Revision 3.0
SYSTEM MESSAGES
This message displays when the MB switch on the PFT card is turned OFF while extracting or inserting a cir-
cuit card, or at PM initialization.
➀ Faulty PFT card No.
➁ Location of faulty PFT card
1: XXXX 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
➀ ➁
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b7 b2 b1 b0
b7 b6 b5 b4 b3 b2 b1 b0
Default...
Start reading NEC Neax 2400 Imx System Operations And Maintenance Manual

Related Manuals for NEC Neax 2400 Imx System Operations And Maintenance Manual

All NEC manuals