NEC Neax 2400 Imx Hotel Features And Specifications

NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Page 99
Feature Transparency Over CCIS H-22
H-22  Feature Transparency Over CCIS
General Description
This feature allows a hotel system to use Common Channel Interoffice Signaling (CCIS), which conforms to the
CCITT Signaling System No. 7. Some of the hospitality services may be activated over different offices via the
CCIS lines.
Operating Procedure
To originate a CCIS call:
Figure 10  Example of Display for Call Origination — from...

NEAX2400 IMX Hotel Features and Specifications
Page 100NDA-24245, Issue 2
H-22 Feature Transparency Over CCIS
Operating Procedure (cont’d)
To terminate a CCIS call:
To answer a CCIS call:
Figure 12  Call Termination on Attendant Console, Desk Console, Special Administration Dterm
To set and cancel service features from the Console:
Action Result
Press the RLS key. Console displays time, date, and site name.
Action Result
The Attendant or the Dterm user answers an 
incoming central office call.The...

NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Page 101
Feature Transparency Over CCIS H-22
Operating Procedure (cont’d)
Figure 13  Example of Service Feature Setting — Attendant Console and Desk Console
Service Conditions
1. This service is available in 1-IMG and 4-IMG systems.
2. The service is available for the PMS Terminal Models 60/90/120.
3. The connection to the host computer is made in the individual office.
4. The same PMS interface model is assigned in every office.
5. When a...

NEAX2400 IMX Hotel Features and Specifications
Page 102NDA-24245, Issue 2
H-22 Feature Transparency Over CCIS
Service Conditions (cont’d)
16. The day/night mode changeover is performed by the NITE key in the office where the Console is placed,
and by the external key in the other offices. Before leaving, the Attendant should press the NITE key and
answer all the terminating calls.
17. When NAME DISPLAY – SYSTEM – CCIS [N-36] and Guest Name Display over CCIS are both
available, NAME DISPLAY – SYSTEM –...

NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Page 103
Feature Transparency Over CCIS H-22
LEGEND
:
X: Available —: Not Available
*: Available with some limitations✰: USA and Canada only
D-150 Double Suite Room —
D-151 DND/MW lamp Control —
G-1 Guest/Administrative Service X
G-4 Group Service through PMS X*Available from Console / 
D
term with Hospitality 
Functions.
G-5 Guest Name Display through PMS X
G-6D
Guest Name Display –D
termX
G-7D
Guest Information Display – D
term—
G-8...

NEAX2400 IMX Hotel Features and Specifications
Page 104NDA-24245, Issue 2
I-23 Inter-Position Transfer 2
I-23 Inter-Position Transfer 2
General Description
This feature is applicable for a multi-attendant environment and will provide for the transfer of an incoming station
or trunk call to a group of attendants by use of the Priority Call key.
An attendant can answer an incoming call, put the call on hold at the Attendant loop, and page the requested party.
The paged party calls the attendant, and if a...

NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Page 105
Language Service L-27
L-27 Language Service
General Description
This service provides the announcement in the guests language and the language information display in case
following services are activated.
1. Announcement Services
The announcements sent to the guest will be in his/her language.
AUTOMATIC WAKE-UP [A-10]
AUTOMATIC WAKE-UP – HOTEL ATTENDANT [A-58]
GROUP SERVICE THROUGH PMS [G-4]
2. Language Information Display
When...

NEAX2400 IMX Hotel Features and Specifications
Page 106NDA-24245, Issue 2
L-27 Language Service
Service Conditions (cont’d)
4. The default identifiers of languages 1-7 can be changed by the customer to include other languages. Up to
four ASCII characters can be used. (Refer to the AHSY command for programming index 1-32.) 

NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Page 107
Message Waiting M-6
M-6 Message Waiting
General Description
This feature allows the Console, PMS terminal, or Front Desk Terminal to illuminate a lamp on an individual station
to indicate when a message is waiting. With the AUTOMATIC MESSAGE WAITING LAMP OFF [A-48] feature,
the MW lamp is automatically extinguished when the guest calls to retrieve messages from the message center. Refer
to the AUTOMATIC MESSAGE WAITING LAMP OFF...

NEAX2400 IMX Hotel Features and Specifications
Page 108NDA-24245, Issue 2
M-6 Message Waiting
Service Conditions (cont’d)
2. Desk Terminal – If MESSAGE WAITING is cancelled from the Console, it will remain displayed at the
Front Desk Terminal, and vice versa.
3. Message Waiting set from Message Center Interface cannot be displayed at the Front Desk Terminal or
Console. Message Waiting set from Message Center Interface must be cancelled from message Center
Interface.
4. For the conditions of the LCD...