NEC Neax 2400 Imx Hotel Features And Specifications

NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Page 59
Do Not Disturb - DtermD-11D
Service Conditions (cont’d)
5. If a call to a station in DO NOT DISTURB mode is routed to the Console, the Attendant may be able to
connect both stations for temporary service cancellation by pressing the DND OVER key. This aspect of
the DO NOT DISTURB feature is programmable into system data.
6. DO NOT DISTURB is provided for guest room stations only.
7. When a station in a suite sets DO NOT DISTURB,...

NEAX2400 IMX Hotel Features and Specifications
Page 60NDA-24245, Issue 2
D-15 Day/Night Class of Service
D-15   Day/Night Class of Service
General Description
This feature permits all stations within a tenant to alternate between two different CLASS OF SERVICE –
INDIVIDUAL [C-15] options, one for Day mode and another for Night mode. System data can be programmed so
that once the ATTENDANT CONSOLE [A-3] has entered the NIGHT CONNECTION [N-1, 2] mode, a stations
CLASS OF SERVICE – INDIVIDUAL [C-15] will be...

NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Page 61
Direct Page Connection D-23
D-23   Direct Page Connection
General Description
This feature allows direct loop-to-loop connection for paging, enabling the Attendant to hold an incoming (IC) call,
page the desired party, then directly connect both parties after the paged party answers.
Operating Procedure
For IC call on a loop requiring paging:
To connect the held party to the paged party, (via HOUSE PHONE [H-8] or dial “0”):...

NEAX2400 IMX Hotel Features and Specifications
Page 62NDA-24245, Issue 2
D-24 Direct Paging
D-24   Direct Paging
General Description
This feature eliminates the need for the Attendant to dial for paging access. While pressing the PG key on the
Console, the Attendant is directly connected to customer-provided paging equipment.
Operating Procedure
To establish connections to paging equipment, press the PG key on the console and page the desired party.
Service Conditions
1. Paging equipment is to be...

NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Page 63
Direct Service Set/Reset D-25
D-25   Direct Service Set/Reset
General Description
When the Attendant responds to guest calls via the GST or ANSWER key on the Console, or when a call is
answered at the Front Desk Terminal, DIRECT SERVICE is established by pressing the associated set/reset key.
Station number dialing, ENTER and EXIT operations are not required. DIRECT-SERVICE SET/RESET is
available for the following:
AUTOMATIC...

NEAX2400 IMX Hotel Features and Specifications
Page 64NDA-24245, Issue 2
D-25 Direct Service Set/Reset
Service Conditions (cont’d)
2. DIRECT SERVICE SET/RESET is available after a guest station calls the Attendant or the Front Desk
Terminal, and until the attendant presses the CANCL key. The guest station is not required to remain
connected for the service to be initiated. 

NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Page 65
Direct Station Selection D-26
D-26   Direct Station Selection
General Description
Ten DIRECT STATION SELECTION (DSS) keys are provided on the Console for direct access to frequently called
Administration or service stations such as restaurant, valet, maid, etc.
Operating Procedure
Press the loop and the desired DSS key to originate a call.
Service Conditions
1. A maximum of ten keys are provided for DIRECT STATION SELECTION on each...

NEAX2400 IMX Hotel Features and Specifications
Page 66NDA-24245, Issue 2
D-88 Directory Assistance Interface
D-88   Directory Assistance Interface
General Description
This feature allows the Console operator to search for the station number of a guest via the PMS terminal. The
Console must have a PMS terminal dedicated to directory assistance. The guests name, station number, and other
information normally exchanged between the PMS and NEAX2400 IMX are entered into the PMS data base at
Check-In. The PMS...

NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Page 67
Direct Selection – Outside D-89
D-89   Direct Selection – Outside
General Description
Ten DIRECT STATION SELECTION (DSS) [D-26] keys are provided on the Console for direct access to
frequently called outside numbers or to emergency numbers such as fire, police, or ambulance.
Operating Procedure
To originate a call, press LOOP key and the desired DSS key.
Service Conditions
1. A maximum of ten keys are provided for DIRECT STATION...

NEAX2400 IMX Hotel Features and Specifications
Page 68NDA-24245, Issue 2
D-105D Dterm With Hotel Function
D-105D   Dterm With Hotel Function
General Description
This feature allows the users of 16-button or 24-button Dterm to control the following services by operating
programmable line/feature keys in the same manner as the keys of the Hotel Console. Fifteen programmable feature
keys are assigned to the Front Desk Terminal to provide full hospitality functionality.
AUTOMATIC WAKE-UP [A-10] Set/Reset...