NEC Neax 2400 Imx Hotel Features And Specifications

NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Page 9
NUMBERING PLAN
Commands Related to the Numbering Plan (cont’d)
b.) When the Table is to be provided separately for Administration and Guest stations.
(b
6 = 0)
Note:
Administration stations can call Guest stations, but calls from Guest stations to Administration stations are restricted.
A call from a Guest Station to a predetermined Administration Station is allowed via Same Number Access (Split
Access) service.

SYS1 INDEX 161 b6,...

NEAX2400 IMX Hotel Features and Specifications
Page 10NDA-24245, Issue 2
NUMBERING PLAN
Commands Related to the Numbering Plan (cont’d)
5. ASPS (Assignment of Special Access Code for Same Number Access)
When Split Access (Same Number Access) is required, these commands are used to specify the kind of
service to be executed or the route to be accessed when a Special Access Code or Trunk Access Code is
dialed.
6. ASPF (Assignment of Special Access Code for Floor Service)
This command is used to assign the...

NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Page 11
NUMBERING PLAN
Examples of Numbering Plan Data Assignments (cont’d)
Entry Procedure:
START
ASYD
AANP
SYS1INDEX 160, b6 = 0
Numbering Plan Development Table is provided separately for 
Administration and Guest.
INDEX 161, b
6 = 0
Use of “#” code in the Timing Start Service is made effective.
INDEX 165, b
7 = 1
Floor Service is provided.
With respect to the 1st digit code (1ST DC), assign Number of 
Necessary Digits (NND) as...

NEAX2400 IMX Hotel Features and Specifications
Page 12NDA-24245, Issue 2
NUMBERING PLAN
Examples of Numbering Plan Data Assignments (cont’d)
AGSP
ASPS
With respect to the Access Code (ACC) assign service features 
as follows:
ACC
SRVSIDNo.KIND
0SSC57 0 0
8SSC56 0 –
ACC
SRV RT
9OGC1
With respect to the data assigned by AASP and AGSP, assign 
service features as follows:
No.
FSRVSIDSTN
 00SSC 2 –
0 1 STN –  4000
Assign the station data of Administration stations. Also, assign 
the data for floor service as...

NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Page 13
DESCRIPTION OF SERVICE FEATURES
CHAPTER 3 DESCRIPTION OF SERVICE FEATURES
Hotel Service Features
This section explains each Hotel service feature by the following items:
 General Description
 Operating Procedure
 Service Conditions
General Description
This item explains a general description of the service feature.
Operating Procedure
This item explains the procedure to be followed for receiving a specific service feature...

NEAX2400 IMX Hotel Features and Specifications
Page 14NDA-24245, Issue 2
This page is for your notes. 

NEAX2400 IMX Hotel Features and Specifications
NDA-24245,  Issue 2
Page 15
Automatic Wake-Up A-10
A-10 Automatic Wake-Up
General Description
This service feature allows the system to be programmed to automatically call guest rooms at specified times. Upon
answering, the guest is connected to a recorded announcement or music source. A printout of unanswered or blocked
wake-up attempts for guest rooms is provided at the Hotel printer. This feature can be activated from the guest room
stations,...

NEAX2400 IMX Hotel Features and Specifications
Page 16NDA-24245,  Issue 2
A-10 Automatic Wake-Up
Operating Procedure (cont’d)
To set AUTOMATIC WAKE-UP from a Regular Administration Station:
Only separate set and cancel codes will operate from a regular administration station.
To cancel AUTOMATIC WAKE-UP from a Regular Administration Station:
Only separate set and cancel codes will operate from a regular administration station.
To set AUTOMATIC WAKE-UP from a Special Administration Station:
Only...

NEAX2400 IMX Hotel Features and Specifications
NDA-24245,  Issue 2
Page 17
Automatic Wake-Up A-10
Operating Procedure (cont’d)
b.) If the wake-up time is entered after the guest line is released:
To cancel AUTOMATIC WAKE-UP from the Front Desk Terminal or Console using the WUS/WUR (Wake-Up 
Set/Wake-Up Reset) key:
a.) When guest calls to cancel a wake-up call (see DIRECT SERVICE SET/RESET [D-25]):
b.) If the wake-up cancel is input after the guest line is released:
To call the guest station that does...

NEAX2400 IMX Hotel Features and Specifications
Page 18NDA-24245,  Issue 2
A-10 Automatic Wake-Up
Service Conditions
1. From the Front Desk Terminal or Console, set AUTOMATIC WAKE-UP using either 24-hour time, or
12-hour time. When using 12-hour time, time is entered by dialing a special code, which includes either a
# or * before entering the time to indicate PM. For example, when dialing the desired time, dial #1030 for
10:30 PM. The choice of # or * is assigned in system data.
2. The maximum number of...