NEC Neax 2400 Imx Hotel Features And Specifications

NEAX2400 IMX Hotel Features and Specifications
NDA-24245,  Issue 2
Page 49
Called Number Display – Hotel Attendant Console C-71
C - 7 1   C a l l e d  N u m b e r  D i s p l a y  –                                           
Hotel Attendant Console
General Description
If a call is transferred to the Console as a result of such features as:
DO NOT DISTURB [D-11]
CALL FORWARDING – ALL CALLS [C-5]
CALL FORWARDING – BUSY LINE [C-2]
CALL FORWARDING – DONT ANSWER [C-3]
CALL FORWARDING – INTERCEPT/ANNOUNCEMENT...

NEAX2400 IMX Hotel Features and Specifications
Page 50NDA-24245,  Issue 2
C-71 Called Number Display – Hotel Attendant Console
Service Conditions
1. This feature is effective when a station-to-station call or a DID call has been routed to an Console as a
result of DO NOT DISTURB [D-11], CALL FORWARDING – ALL CALLS [C-5], CALL
FORWARDING – BUSY LINE [C-2], CALL FORWARDING – DONT ANSWER [C-3], or CALL
FORWARDING – INTERCEPT/ANNOUNCEMENT [C-25], and is answered by the Attendant.
2. If the Attendant presses...

NEAX2400 IMX Hotel Features and Specifications
NDA-24245,  Issue 2
Page 51
Connecting Room Service C-72
C-72   Connecting Room Service
General Description
This feature allows the PMS to connect two rooms on a temporary basis to act as one room. One room will act as
the master room and the other to act as a secondary room. If suite rooms are to be connected, the master station in
the suite room arrangement is used for connecting room purposes.
Operating Procedure
CONNECTING ROOM SERVICE assignment is made...

NEAX2400 IMX Hotel Features and Specifications
Page 52NDA-24245,  Issue 2
C-72 Connecting Room Service
Service Conditions (cont’d)
13. When the Console dials the master station, the DSS keys and lamps are used in the operation. The status
of the connecting room phones appear on the DSS lamps. Ringing is generated at the connecting room
phones when the first DSS key is pressed or the START key is pressed. If a secondary phone DSS key is
pressed, only the corresponding secondary phone will ring. The DSS...

NEAX2400 IMX Hotel Features and Specifications
NDA-24245,  Issue 2
Page 53
Call Information Display C-147
C-147 Call Information Display
General Description
This feature allows the following information to be displayed on the guest room Dterms LCD. Dterm may be used for
guest stations.
Calling/Called Station
AUTOMATIC WAKE-UP – D
term[A-10D]
ALERT SERVICE [A-57]
DO NOT DISTURB – D
term[D-11D]
DIRECT DATA ENTRY – STATION [D-107]
MESSAGE WAITING [M-6]
MAID STATUS [M-22]
ROOM CUTOFF [R-9]
2ND WAKE-UP CALL –...

NEAX2400 IMX Hotel Features and Specifications
Page 54NDA-24245,  Issue 2
C-147 Call Information Display
Operating Procedure (cont’d)
e.) During a call through Tie line in progress:
- OR -
2. For other display services, see each service feature description.
Service Conditions
1. When the guest name two-line display is provided by the system parameters, the time display (lower line)
disappears during a call.
2. When originating a call using the ISDN terminal, the charging information is not displayed....

NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Page 55
Do Not Disturb D-11
D-11   Do Not Disturb
General Description
This feature allows the Console, PMS terminal, Front Desk Terminal, Special Administration Station, or Guest
Station to temporarily place individual stations into a mode that blocks incoming calls. Outgoing calls may still be
placed from stations in DO NOT DISTURB (DND) mode.
Operating Procedure
To set DO NOT DISTURB from the Console or Front Desk Terminal:
To cancel...

NEAX2400 IMX Hotel Features and Specifications
Page 56NDA-24245, Issue 2
D-11 Do Not Disturb
General Description (cont’d)
To cancel DO NOT DISTURB from Special Administration Station:
To set DO NOT DISTURB from guest stations:
To cancel DO NOT DISTURB from guest stations:
To obtain a printout of stations in the DO NOT DISTURB state, refer to the AUDIT REPORTS [A-26] feature
description.
Note:
For the Console and Front Desk Terminal only:
If an error is made in the course of key operations, press the...

NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Page 57
Do Not Disturb D-11
Service Conditions (cont’d)
6. DO NOT DISTURB is provided for guest room stations only.
7. When a station in a suite sets DO NOT DISTURB, all stations in that suite are placed in the DND mode.
8. Station in DND mode can receive calls from specific trunk routes or stations through system data
assignment.
9. Guest “Boss” and “Secretary” rooms override DND mode for calls between assigned stations.
10. When setting...

NEAX2400 IMX Hotel Features and Specifications
Page 58NDA-24245, Issue 2
D-11D Do Not Disturb - Dterm
D-11D   Do Not Disturb - Dterm 
General Description
This feature allows a guest room Dterm to temporarily block incoming calls. Outgoing calls may still be placed from
stations in DO NOT DISTURB (DND) mode.
Operating Procedure
To set DO NOT DISTURB from guest room Dterms:
To cancel DO NOT DISTURB from guest room Dterms:
To obtain a printout of stations in DO NOT DISTURB state, refer to the AUDIT...