NEC Neax 2400 Imx Hotel Features And Specifications

NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Page 69
Dterm With Hotel Function D-105D
Operating Procedure (cont’d)
For AUTOMATIC WAKE-UP [A-10]
Idle Condition:
Connected to a guest station:
Step Action Result
1
Press the WUS or WUR key.The LCD shows the feature 
abbreviation.
2
Enter the WAKE-UP time in 24-hour time. (See 
AUTOMATIC WAKE-UP [A-10] for enhanced 12-hour time 
entry.)
3Enter the guest station number.
4Press the ENT key
5Press the END key.
6Press the CE key to clear an...

NEAX2400 IMX Hotel Features and Specifications
Page 70NDA-24245, Issue 2
D-105D Dterm With Hotel Function
Operating Procedure (cont’d)
For ROOM STATUS [R-10]
Idle Condition:
Connected to a guest station:
Step Action Result
1
Press the STS key.The LCD shows the feature 
abbreviation.
2Enter the guest station number.
3Press the ENT key.The MESSAGE WAITING [M-6] set, 
CHECK-IN/CHECKOUT [C-23] set, 
DO NOT DISTURB [D-11] set, 
ROOM CUTOFF [R-9] set LEDs will 
illuminate if these services have been 
set to...

NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Page 71
Dterm With Hotel Function D-105D
Operating Procedure (cont’d)
Figure 6  Example of 16-Button Dterm on a Front Desk Console
For AUDIT REPORTS [A-26]
Idle Condition only:
Service Conditions
1. A maximum of 32 Front Desk Terminals per Module Group (MG) may be assigned.
2. 16-button or 24-button D
terms shall be used as a Front Desk Terminal.
3. Only Special Administration Stations may be Front Desk Terminals.
4. MESSAGE WAITING [M-6]...

NEAX2400 IMX Hotel Features and Specifications
Page 72NDA-24245, Issue 2
D-105D Dterm With Hotel Function
Service Conditions (cont’d)
8. The service feature abbreviations shown on the 16-button or 24-button Dterm LCD are shown in Table 4:
Table 4  Standard Service Abbreviations on Dterm
Feature Set/Activate Reset
AUDIT REPORTS [A-26] AUD —
AUTOMATIC WAKE-UP [A-10] WUS WUR
CHECK-IN/CHECKOUT [C-23] C/I C/O
DO NOT DISTURB [D-11] DDS DDR
MESSAGE WAITING [M-6] MWS MWR
ROOM CUTOFF [R-9] RCS RCR
ROOM STATUS...

NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Page 73
Direct Data Entry – Station D-107
D-107   Direct Data Entry – Station
General Description
This feature allows a maid or other hotel personnel to enter numeric data to the Property Management System (PMS)
computer, using the guest room station for entry through dial operation.
Operating Procedure
Note:
If a Dterm is used for a guest station, the LCD displays as shown below:
Service Conditions
1. This feature is activated only...

NEAX2400 IMX Hotel Features and Specifications
Page 74NDA-24245, Issue 2
D-150 Double Suite Room
D-150   Double Suite Room
General Description
This service allows two suite rooms (single suite rooms) to be connected as a double suite room. Maximum eight
stations can be called simultaneously.
Figure 7  Example of Single/Double Suite Room
Operating Procedure
To call a double suite room:
Service Conditions
1. The single suite rooms must be assigned prior to activating this service.
2. The telephone numbers...

NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Page 75
Double Suite Room D-150
Service Conditions (cont’d)
c.) When the individual telephone number of the double suite room is called, only that telephone
rings.
4. When all the telephones of the double suite room are rung simultaneously, the call is connected to the first
telephone which answers. When the call is answered, other telephones stop ringing.
5. Each of the telephones in the double suite room can originate the call...

NEAX2400 IMX Hotel Features and Specifications
Page 76NDA-24245, Issue 2
D-151 DND/MW Lamp Control
D-151  DND/MW Lamp Control
General Description
This service allows the Message Waiting Lamp to be controlled by setting/cancelling DO NOT DISTURB [D-11]
service. The Message Waiting Lamp will either light or flash to distinguish which of the services (MESSAGE
WAITING [M-6] or DO NOT DISTURB [D-11]) is being activated.
Operating Procedure
Refer to the operating procedures of MESSAGE WAITING [M-6] and DO NOT...

NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Page 77
Emergency Call Monitor – Attendant E-21
E-21   Emergency Call Monitor – Attendant
General Description
EMERGENCY CALL MONITOR – ATTENDANT alerts the hospitality console operator that a guest has placed
a call to an emergency service such as 911. The name and room number of the guest display on the console.
Operating Procedure
Service Conditions
1. An external bell or buzzer can be connected to the emergency trunk through a relay to...

NEAX2400 IMX Hotel Features and Specifications
Page 78NDA-24245, Issue 2
G-1 Guest/Administrative Service
G-1   Guest/Administrative Service
General Description
This feature enables stations to be classified as guest stations and administration stations, and to use the respective
numbering plan. This allows a guest station to call an Administration Station by using a feature access code.
Operating Procedure
No manual operation is required.
Service Conditions
1. Calls between two Administration stations...