NEC Neax 2400 Imx Hotel Features And Specifications

NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Page 89
Guest Information Display – Hotel Attendant Console G-8
G - 8   G u e s t  I n f o r m a t i o n  D i s p l a y  –                                      
Hotel Attendant Console
General Description
This feature allows guest information to be displayed on a PMS terminal corresponding to the Console in the
following cases:
When the Console receives a call from a guest station
When the Console originates a call to a guest station...

NEAX2400 IMX Hotel Features and Specifications
Page 90NDA-24245, Issue 2
G-9 Guest Information Display – PMS Terminal
G-9 Guest Information Display – PMS Terminal
General Description
This feature allows guest information to be displayed on a Special Administration Station using a PMS port in the
following cases:
When a Special Administration Station receives a call from a Guest Station.
When a Special Administration Station originates a call to a Guest Station.
Operating Procedure
Call termination...

NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Page 91
Guest Room Calling – Hotel Attendant G-11
G-11 Guest Room Calling – Hotel Attendant
General Description
This feature allows the Console operator to display guest room information before calling a guest room.
Operating Procedure
Service Conditions
1. This feature is not effective when calling an Administration Station. When an Administration Station is
called, the station is rung immediately after the dialing is completed by the...

NEAX2400 IMX Hotel Features and Specifications
Page 92NDA-24245, Issue 2
G-11 Guest Room Calling – Hotel Attendant
Service Conditions (cont’d)
Figure 9  DSS Key/Station Correspondence and Lamp Indications
4. If DSS status display is not set in system data, the guest room rings immediately after being dialed.
5. When the slave room of the SUITE ROOM SERVICE [S-75] is called by the DSS key, TIMING START
[T-21] is not effective.
6. This feature is not available for remote guest stations when Centralized...

NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Page 93
Group Restriction G-21
G-21 Group Restriction
General Description
This feature allows the guest stations in a group to be restricted per the following conditions.
1. GROUP RESTRICTION is categorized as follows:
Outgoing Call Restriction Guest stations in a group are restricted from originating a call.
Outgoing Station Call Restriction Guest stations in a group are restricted from making a call to
stations in the other groups....

NEAX2400 IMX Hotel Features and Specifications
Page 94NDA-24245, Issue 2
G-21 Group Restriction
Operating Procedure (cont’d)
To cancel GROUP RESTRICTION from the Console:
To set Group to Group connection from the Console:
To cancel Group to Group Connection from the Console:
To operate from the PMS terminal, follow the operating procedure for the PMS terminal.
a.) To set/cancel GROUP RESTRICTION
ORSC: Outgoing restriction service class
0 = to cancel Outgoing Call Restriction
1 = to set Outgoing...

NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Page 95
Group Restriction G-21
Service Conditions
1. This service may not be provided for the guest rooms not checked in.
2. The maximum number of the groups which may be entered in GROUP RESTRICTION is 128.
3. Set/cancellation for GROUP RESTRICTION is available from the Console or according to texts from a
PMS terminal.
4. When the Console operator enters select numbers for restrictions, the following titles are displayed.
Outgoing Call...

NEAX2400 IMX Hotel Features and Specifications
Page 96NDA-24245, Issue 2
G-21 Group Restriction
Service Conditions (cont’d)
 When replacement of RSC is assigned.
11. The followings are significations of restriction status displayed on the Hotel Console. However, setting
status of Group to Group Connection is not displayed.
No display No entry
“SO” An entry of Outgoing Station Call Restriction exists
“CO” An entry of Outgoing C.O. Call Restriction exists
“OG” An entry of Outgoing Call Restriction exists...

NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Page 97
Guest Station - DtermG-24
G-24 Guest Station - Dterm 
General Description
This feature allows the Dterm to be used as a guest station in the Hotel system. Various useful features such as
HANDS FREE ANSWER BACK - Dterm [H-4D] and MULTIPLE LINE OPERATION - Dterm [M-20D] have
become available for guest room stations.
In addition to time display, 
The Dterm LCD is used for the following Hotel services:
AUTOMATIC WAKE-UP [A-10]
CALLING...

NEAX2400 IMX Hotel Features and Specifications
Page 98NDA-24245, Issue 2
H-8 House Phone/Hot Line
H-8 House Phone/Hot Line
General Description
This feature allows selected stations to reach the Attendant (house phone) or a predesignated station (hot line) by
going off-hook. House phones are normally provided in a hotel lobby or restaurant.
Operating Procedure
Service Conditions
1. When the house phone terminates at the Console, the INCOMING CALL IDENTIFICATION [I-2] will
appear as the HP key of the...