NEC Neax 2400 Imx Hotel Features And Specifications

NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Page 129
Secretarial Service – Guest Station S-74
Operating Procedure (cont’d)

To cancel SECRETARIAL SERVICE – GUEST STATION from the Hotel Console:

To call the Secretary Station from the Boss’ Station:
Step Action Result
1
Press the SCR key.The following is displayed at the Hotel Console:
2Dials the secretary’s 
station number.The display changes to display the secretary’s station number:
3Press the ENTER key.The display changes as...

NEAX2400 IMX Hotel Features and Specifications
Page 130NDA-24245, Issue 2
S-74 Secretarial Service – Guest Station
Operating Procedure (cont’d)
To call the Boss’ Station from the Secretary Station:
Note:
When more than one Boss’ Station are set, dial the Station number of each Boss after dialing access code.

To transfer an incoming call from the secretary to boss:
Service Conditions
1. AUTOMATIC WAKE-UP [A-10] and VIP WAKE-UP calls go to the boss station, not to the secretarys
station.
2. The Console...

NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Page 131
Secretarial Service – Guest Station S-74
Service Conditions (cont’d)
9. An incoming call to the Boss’ Station is automatically transferred to the secretary’s station. If the
secretary’s station is busy, the caller hears the busy tone. If the secretary has Call Forward – Busy set, the
call rings at the CFW – Busy destination. 

NEAX2400 IMX Hotel Features and Specifications
Page 132NDA-24245, Issue 2
S-75 Suite Room Service
S-75 Suite Room Service
General Description
The SUITE ROOM SERVICE feature allows up to four analog stations to serve one suite room. Each telephone will
have its own station number. One station is designated as the primary station. When the primary station is called,
any secondary station in the suite may answer.
Operating Procedure
To answer a call:
To originate a call:
Service Conditions
1. Each of the...

NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Page 133
Suite Room Service S-75
Service Conditions (cont’d)
7. The station number displayed on the Dterm or Console is the primary station number or phantom number,
regardless of the telephone used in the suite room.
8. There is no limitation to the number of suites in a system.
9. If digital remote units are used for suite room service, ringing cannot be synchronized.
10. PMS registers all hospitality activity against the primary...

NEAX2400 IMX Hotel Features and Specifications
Page 134NDA-24245, Issue 2
S-75 Suite Room Service
Service Conditions (cont’d)
19. The primary station number of the suite room must be assigned as the my line number of the Dterm. When
one Dterm is used in a suite (sub lines will be virtual stations):
a.) The my line number will be the prime line number, and it should be assigned as the primary
station number of the suite room.
b.) The primary station number is used for the interface to PMS.
c.) All sub...

NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Page 135
2nd Wake-up Call – Same Guest Station S-128
S-128  2nd Wake-up Call – Same Guest Station
General Description
By combining with AUTOMATIC WAKE-UP [A-27] service, this service allows two wake-up calls to be set for a
guest room.
Operating Procedure
The notice asking the guest to call the Attendant when the guest wants to set the second wake-up call should be
prepared in the guest room. The guest sees the notice and calls the...

NEAX2400 IMX Hotel Features and Specifications
Page 136NDA-24245, Issue 2
S-128 2nd Wake-up Call – Same Guest Station
Operating Procedure (cont’d)
To cancel the second wake-up call using the WUR key:
When the guest calls in to cancel the second wake-up call (see DIRECT SERVICE SET/RESET [D-25]):
If the wake-up cancel is entered after the guest line is released:
To set the second wake-up call using the WUS key and the service set code:
Note 1:
In case of using a Dterm for a guest station, if the second...

NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Page 137
2nd Wake-up Call – Same Guest Station S-128
Service Conditions
1. When setting the second wake-up call, the attendant can select whether to set it as AUTOMATIC WAKE-
UP [A-27] service or AUTOMATIC WAKE-UP – HOTEL ATTENDANT ASSISTANCE [A-58]
service.
2. This service can be set/cancelled from the Console or the PMS Terminal (Model 90 and 120 only).
However, when setting from the PMS Terminal, AUTOMATIC WAKE-UP – HOTEL ATTENDANT...

NEAX2400 IMX Hotel Features and Specifications
Page 138NDA-24245, Issue 2
S-128 2nd Wake-up Call – Same Guest Station
Service Conditions (cont’d)
15. When 2ND WAKE-UP CALL is executed, the LCD displays as shown below:
16. When the guest room D
term answers the second wake-up call, “WAKE UP” display will remain.
17. For the conditions of the LCD display when several services are set at the same time, see Service
Conditions of AUTOMATIC WAKE-UP – D
term [A-27D].                         WAKE UP...