NEC Neax 2400 Imx Hotel Features And Specifications

NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Page 119
PMS Interface P-29
Service Conditions (cont’d)
3. Message format:
Note:
The Block Check Code is for the Longitudinal Redundancy Check.
On detecting STX, the computation starts (STX is excluded).
On detecting ETX, the computation ends (ETX is included).
4. Data format and contents of TEXT are in conformity with Bell System Voice Communications Technical
Reference Publication No. 42707, PMS Data Link Interface Specifications....

NEAX2400 IMX Hotel Features and Specifications
Page 120NDA-24245, Issue 2
P-34 Paging Console
P-34 Paging Console
General Description
The PAGING CONSOLE feature allows a Console operator to transfer an incoming call to a PAGING CONSOLE
when the guest is not in his or her room. The PAGING CONSOLE operator pages the guest through the hotel public
address system, requesting him or her to dial a special number from a nearby telephone. When the guest calls, the
PAGING CONSOLE operator connects the guest to...

NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Page 121
Room Cutoff R-9
R-9 Room Cutoff
General Description
This feature allows the Console, PMS terminal, or Front Desk Terminal to temporarily restrict outgoing CO calls
from guest room telephones while the guests are away.
Operating Procedure
To set ROOM CUTOFF from Console or Front Desk Terminal:
Note:
 If the “RC” steady display is available by system data, the following will display on a Guest station Dterm:

To cancel ROOM CUTOFF...

NEAX2400 IMX Hotel Features and Specifications
Page 122NDA-24245, Issue 2
R-9 Room Cutoff
Service Conditions
1. Stations in ROOM CUTOFF mode that attempt to access C.O. lines will be routed to a reorder tone
connection, the Console, or an announcement on a system-wide basis.
2. Stations in ROOM CUTOFF mode may be able to place outgoing C.O. calls via the Attendant, depending
on the restriction data assigned via the MAT.
3. ROOM CUTOFF is available for guest room stations only.
4. Through system data...

NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Page 123
Room Status R-10
R-10 Room Status
General Description
This feature provides a ROOM STATUS display on the Console or Front Desk Terminal. The ROOM STATUS
display indicates the following:
AUTOMATIC WAKE-UP  [A-10]
DO NOT DISTURB  [D-11]
GUEST NAME DISPLAY through PMS  [G-5]
MESSAGE WAITING  [M-6]
ROOM CUTOFF  [R-9]
Room Occupied
Room Reserved
Station number
VIP (PMS option)
Operating Procedure
To display ROOM STATUS on the Console...

NEAX2400 IMX Hotel Features and Specifications
Page 124NDA-24245, Issue 2
R-17 Room Numbering
R-17 Room Numbering
General Description
This feature enables flexible assignment of station numbers based on the guest ROOM NUMBERING plan.
Operating Procedure
Guest room calls are completed in the same manner as calls to ordinary stations.
Service Conditions
1. The same station number cannot be assigned to more than one station in the system.
2. Guest numbers must be contained within Tenant 1.
3. One-, two-,...

NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Page 125
Split Access S-17
S-17 Split Access
General Description
This feature allows stations which are differentiated by Guest/Administration data, CLASS OF SERVICE –
INDIVIDUAL [C-15] data (Service Feature Class, Telephone Equipment Class, Route Restriction Class) or Day/
Night information to dial the same access codes but access different service features or trunk routes.
Operating Procedure
System data programming is performed from the...

NEAX2400 IMX Hotel Features and Specifications
Page 126NDA-24245, Issue 2
S-32 Screening (Split Hold)
S-32 Screening (Split Hold)
General Description
This feature provides the Attendant with a special SCRN key which lets them selectively extend calls which require
SCREENING, and process other calls while waiting for the called station to answer. This is especially helpful when
the Attendant is responding to a VIP call which requires special handling, but must also enter other loops because
other calls...

NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Page 127
Service Call Routing S-49
S-49 Service Call Routing
General Description
The SERVICE CALL ROUTING feature allows several extensions to be assigned the same number with different
terminations by differentiating between a main building and annex, or between floor numbers. This makes it
possible to set up service stations that are assigned the same number at several places in the hotel.
Operating Procedure
To call a service station:...

NEAX2400 IMX Hotel Features and Specifications
Page 128NDA-24245, Issue 2
S-74 Secretarial Service – Guest Station
S-74  Secretarial Service – Guest Station
General Description
This feature allows the Console to temporarily set two or more guest stations to operate in a boss/secretary
arrangement. All calls to the boss are diverted to the secretary. The secretary may screen the calls and then transfer
the call to the boss or just take messages.
Operating Procedure
To set SECRETARIAL SERVICE – GUEST...