NEC Neax 2400 Imx Hotel Features And Specifications

NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Page 139
Toll Terminal Access T-13
T-13  Toll Terminal Access
General Description
This feature enables guest stations to directly access toll trunks. Access may be arranged on a direct-dial or
attendant-assisted basis, depending on the associated Central Office.
Operating Procedure
To operate:
Service Conditions
Guest stations must be assigned the proper Route Restriction Class to gain TOLL TERMINAL ACCESS.
Action Result
The guest station...

NEAX2400 IMX Hotel Features and Specifications
Page 140NDA-24245, Issue 2
T-21 Timing Start
T-21 Timing Start
General Description
This feature allows single-digit and multi-digit stations to use the same numbering plan levels by providing a
predetermined time delay between the completion of dialing and the start of ringing. By pressing the # or * key after
dialing the station number, the station user will not have to wait for ring start. By pressing the START key on the
Console, the attendant will not...

NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Page 141
Voice Mail Service Via Message Center Interface (MCI) V-16
V-16 Voice Mail Service Via Message Center Interface 
(MCI)
General Description
Voice mail service is available for guest and Administration Stations through the Message Center Interface (MCI)
in the NEAX2400 IMX Hotel System. This capability allows the integration of a customer-provided voice mail
system, using an RS-232C interface. Guest calls are Call Forwarded – All...

NEAX2400 IMX Hotel Features and Specifications
Page 142NDA-24245, Issue 2
V-16 Voice Mail Service Via Message Center Interface (MCI)
Operating Procedure (cont’d)
To retrieve a message with operator assistance (attendant only):
Service Conditions
1. The type of port/trunk interface to the voice mail system depends on the type of voice mail system
provided. NEC recommends an analog station (16LCBE) port interface to the voice mail system. These
ports should be programmed in a UCD group.
2. The presence of...

NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Page 143
Wake-up Announcement – Headstart W-2
W-2  Wake-up Announcement – Headstart
General Description
This feature establishes a connection to the WAKE-UP ANNOUNCEMENT from the beginning of the message.
The message will not begin at a random point in the recording. A printout of unanswered or blocked AUTOMATIC
WAKE-UP [A-10] attempts for guests is automatically provided by the hotel printer.
WAKE-UP ANNOUNCEMENT – HEADSTART operates...

NEAX2400 IMX Hotel Features and Specifications
Page 144NDA-24245, Issue 2
W-2 Wake-up Announcement – Headstart
Service Conditions (cont’d)
6. This feature provides three additional wake-up attempts at fixed 3-minute intervals. If the called station is
busy for four attempts, a message is printed on the hotel printer. The number of retries for a no-answer
condition is determined by system data. A maximum of three retries can be assigned.
7. Ringing duration for AUTOMATIC WAKE-UP [A-10] can be varied for...