NEC Neax 2400 Imx Feature Programming Manual

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 937
Multiple Console Operation - CCIS M-43
M-43  Multiple Console Operation - CCIS
General Description
This feature provides console operation where ATTENDANT CONSOLEs [A-3] are installed in more than one
node in the CCIS network.
Operating Procedure
No manual operation is required.
Service Conditions
1. Call transfer among ATTENDANT CONSOLEs [A-3] in different nodes is possible, but call
identification information cannot be transferred...

NEAX2400 IMX Feature Programming Manual
Page 938ND-70184 (E), Issue 3
M-43 Multiple Console Operation - CCIS
Interactions (cont’d)
4. ATTENDANT CONSOLEs [A-3] may not dial another console directly. Talk path will occur only during
INTERPOSITION TRANSFER [I-5].
5. When more than one ATTENDANT CONSOLE [A-3] is installed, a Primary ATTENDANT CONSOLE
[A-3] may be assigned (AMAT command). This ATTENDANT CONSOLE [A-3] will control the
implementation of DAY/NIGHT CLASS OF SERVICE [D-15].
Programming
STEP 1:ASYD...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 939
Message Center Interface - CCIS M-67
M-67 Message Center Interface - CCIS
General Description
This service feature provides an INTERFACE to the external CPU for MESSAGE CENTER information when a
specific UCD group or console in a CCIS network is called. This interface allows external control of Message
Waiting Lamp (MWL) indications on equipped PBX stations.
(Series 7400 software enhancement) This service may be provided through FCCS...

NEAX2400 IMX Feature Programming Manual
Page 940ND-70184 (E), Issue 3
M-67 Message Center Interface - CCIS
Operating Procedure (cont’d)
4. The user at the called station will be able to receive a message from the system by dialing the Pilot number
of the UCD station group connected to the Voice Mail System.
5. The external CPU, upon retrieval of message information, will transmit a data record requesting the PBX
to extinguish the MWL of the corresponding station.
Service Conditions
1. The call type is...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 941
Message Center Interface - CCIS M-67
Service Conditions (cont’d)
 AUTOMATIC RECALL [A-8]
 Call Return from Hold 
 Operator Call
 LDN Call
Feature 2:
 Station dials Message Center Number Directory.
 Direct Trunk Call to Message Center.
 Trunk Call to Message Center extended by ATTENDANT
 Station Call is FORWARDED-ALL CALLS to Message Center.
 Trunk Call is FORWARDED-ALL CALLS to Message Center.
 Station Call is FORWARDED-BUSY...

NEAX2400 IMX Feature Programming Manual
Page 942ND-70184 (E), Issue 3
M-67 Message Center Interface - CCIS
Programming (cont’d)
System 1, Index 70, Bit 0: (1) Called Number Display in service.
System 1, Index 78, Bit 1: (1) Calling and Intermediate Station number indication. Bit 1: (1) Kind of
service class indication. 
System 1, Index 116 (Port 0) through Index 123 (Port 7): Assign the kind of terminal = 1: printer/MCI
to the corresponding output port. (Assigned via AIOC.) 
System 2, Index 6, Bit 0: MCI...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 943
Night Connection - Fixed - CCIS N-15
N-15  Night Connection - Fixed - CCIS 
General Description
When the Night mode has been entered, this service feature routes calls, normally directed to the ATTENDANT
CONSOLE [A-3], to a preselected station in another node through CCIS.
Operating Procedure
1. The Night lamp illuminates, when the Attendant in Node A sets Night mode with the NITE key pressed.
2. An incoming call from the CO RT to the...

NEAX2400 IMX Feature Programming Manual
Page 944ND-70184 (E), Issue 3
N-15 Night Connection - Fixed - CCIS
Operating Procedure (cont’d)
3. Station C answers and is connected with the CO RT. If necessary, the call can be transferred to another
station by means of Call Transfer-All Calls service.
Service Conditions
1. Calls that are being processed, or are in the Hold state when the NIGHT mode is entered, will be
disconnected after the mode changeover has been completed. 
2. If the NIGHT CONNECTION station...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 945
Night Connection - Flexible - CCIS N-16
N-16  Night Connection - Flexible - CCIS
General Description
This feature provides inter-office flexible Night Connection service through the CCIS network, when the NIGHT
CONNECTION-FIXED - CCIS and NIGHT CONNECTION-FLEXIBLE - CCIS stations are located in different
nodes.
Operating Procedure
To set NIGHT CONNECTION-FLEXIBLE - CCIS:
1. The NIGHT CONNECTION-FIXED - CCIS station in the destination...

NEAX2400 IMX Feature Programming Manual
Page 946ND-70184 (E), Issue 3
N-37 Name Display - System - CCIS
N-37 Name Display - System - CCIS
General Description
In between CCIS networks, this service allows calling or called party information (user’s name, telephone number,
etc.) to be displayed on the LCD of the Dterm.
Operating Procedure
No manual operation is required.
Service Conditions
1. When the called party is being rung, the LCD of the calling Dterm displays the name of the called party.
2. When...