NEC Neax 2400 Imx Feature Programming Manual

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 947
Name Display - System - CCIS N-37
Service Conditions (cont’d)
11. When a call has been transferred by Call Forwarding-All Outside Line Calls or Call Forwarding-Busy
Outside Line service, the LCD of the calling party’s Dterm displays the name information of the transfer
destination instead of the name information of the originally dialed station.
12. This service cannot be used in conjunction with ISDN Information Transfer - CCIS...

NEAX2400 IMX Feature Programming Manual
Page 948ND-70184 (E), Issue 3
N-37 Name Display - System - CCIS
Programming (cont’d)
STEP 2:ARTD - Assign route class data for CCIS trunk route.
RT:
43-BT :1 50-DPLY :1 98-CI :0 112-IND :1 

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 949
Number Portability - CCIS N-46
N-46 Number Portability - CCIS
           (Series 7400 software feature)
General Description
This feature allows telephone number data in an FCCS group (a network where multiple NEAX2400 IMXs are
connected via FCCS link) to be carried to another FCCS group. This feature also allows telephone number data to
be carried in a NEAX2000 IVS via CCIS link. This feature is available by simple command operation...

NEAX2400 IMX Feature Programming Manual
Page 950ND-70184 (E), Issue 3
N-46 Number Portability - CCIS
Service Conditions (cont’d)
Legend:
* Destination node
** Node to be connected to the FCCS group where the new number is added
*** Node where the telephone number is located before the Number Portability activation
FCCS Programming 
This data setting describes only the additional or replacement commands used to activate FCCS
services. When used as an FCCS feature, these commands replace the non-network...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 951
Number Portability - CCIS N-46
FCCS Programming (cont’d)
SYSTEM: Checkbox either of the checkboxes, depending on system type (NEAX2400 IMX 1/4/16
IMG system or NEAX2000 IVS system)
TYPE: Checkbox either of the checkboxes, allocation of the telephone numbers is executed by
designating LENs or station number 
(Note 2)
FUG: Enter the FUG number the designated station belongs to (Note 2)
FPC: Enter the FCCS network Point Code the...

NEAX2400 IMX Feature Programming Manual
Page 952ND-70184 (E), Issue 3
O-11 Off-Hook Queuing - CCIS
O-11  Off-Hook Queuing - CCIS
General Description
This feature allows a user in a CCIS network to remain off-hook and automatically enter a first-in, first-out queue
at the calling and distant nodes when an all-trunk-busy condition has been encountered. As soon as an outgoing trunk
becomes available, the off-hook station is connected to that trunk through CCIS.
Operating Procedure
1. Dial the trunk access...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 953
Off-Hook Queuing - CCIS O-11
Interactions (cont’d)
6. The following features cannot be activated toward the busy station:
CALL WAITING-ORIGINATING [C-31]
CALL WAITING-TERMINATING [C-12]
ATTENDANT CAMP-ON WITH TONE INDICATION [A-1, 45]
BUSY VERIFICATION [B-3, 9]
EXECUTIVE RIGHT-OF-WAY [E-1, 8]
7. To disable constant service set tone, change ASYD System Data 1, Index 42 Bit 7 to data “1”. This
changes constant service set tone to burst...

NEAX2400 IMX Feature Programming Manual
Page 954ND-70184 (E), Issue 3
O-12 Outgoing Trunk Queuing - CCIS
O-12 Outgoing Trunk Queuing - CCIS
General Description
This service feature allows Inter-Office, On-Hook OUTGOING TRUNK QUEUING (OGQ) when an outgoing
C.O. line call from a station in a PBX to another station in a different PBX, in the CCIS network, encounters an all
C.O. Lines Busy. 
Operating Procedure
1. Station (b) goes off-hook; receives dial tone.
2. Station (b) dials the C. O. Line Outgoing...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 955
Outgoing Trunk Queuing - CCIS O-12
Operating Procedure (cont’d)
3. Station (b) dials Station (c) in the Center Office and receives a busy tone.
4. Station (b) switch hook flashes and receives the special dial tone.
STN (c)
CO Line
STN (a)All Busy
ATT
[Node A]CCIS
[Node B]STN (b) BT BT
PUBLIC 
SWITCHED 
TELEPHONE 
NETWORK
STN (c)
CO Line
STN (a)All Busy
ATT
[Node A]CCIS
[Node B]STN (b) SPDT SPDT
PUBLIC 
SWITCHED 
TELEPHONE 
NETWORK 

NEAX2400 IMX Feature Programming Manual
Page 956ND-70184 (E), Issue 3
O-12 Outgoing Trunk Queuing - CCIS
Operating Procedure (cont’d)
5. Station (b) dials the OGQ Access Code and receives a service set tone.
6. Station (b) hangs up. Outgoing Trunks become available for processing the call from Station (b). Station
(b) is rung.
STN (c)
CO Line
STN (a)All Busy
ATT
[Node A]CCIS
[Node B]STN (b) SST SST
PUBLIC 
SWITCHED 
TELEPHONE 
NETWORK
STN (c)
RG
Idle
STN (a)ATT
[Node A]CCIS
[Node B]STN (b)
PUBLIC...