NEC Neax 2400 Imx Feature Programming Manual

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 917
Multiple Call Forwarding - Busy Line - CCIS M-41
Service Conditions (cont’d)
3. When CALL FORWARDING is performed in a CCIS network, the following services are not available
at a forwarded-to-station:
CALL FORWARDING-ALL CALLS-OUTSIDE [C-28]
CALL FORWARDING-BUSY LINE-OUTSIDE [C-60]
CALL FORWARDING-DON’T ANSWER-OUTSIDE [C-74]
4. When a call is forwarded to the calling party by CALL FORWARDING-BUSY LINE - CCIS [M-41], the
calling party...

NEAX2400 IMX Feature Programming Manual
Page 918ND-70184 (E), Issue 3
M-41 Multiple Call Forwarding - Busy Line - CCIS
Service Conditions (cont’d)
5. SERVICE DISPLAY - CCIS [S-53] is available at the terminating node. The type of forwarding to be
displayed is CF BUSY.
6. When a call is terminated to an ATTENDANT CONSOLE [A-3] by the MULTIPLE CALL
FORWARDING-BUSY LINE - CCIS [M-41], the call type is BUSY.
7. The system data (ASYD, SYS1, INDEX 486, bit 0-2) decides the maximum number of times for...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 919
Multiple Call Forwarding - Busy Line - CCIS M-41
Service Conditions (cont’d)
The Calling party hears busy tone when the forwarding destination number, assigned to the last
intermediate party (intermediate party 2 in the example below), and the calling party number sent from the
calling party are not identical.
10. When Call Forwarding is restricted because the number of times data or service restriction data, the caller
hears busy...

NEAX2400 IMX Feature Programming Manual
Page 920ND-70184 (E), Issue 3
M-41 Multiple Call Forwarding - Busy Line - CCIS
Service Conditions (cont’d)
13. The following services are activated within one node. The maximum number of times for activating this
feature is the same as previous software releases:
MULTIPLE CALL FORWARDING - ALL CALLS [M-44]: 5 times
MULTIPLE CALL FORWARDING - BUSY LINE [M-24]: 5 times
MULTIPLE CALL FORWARDING - DON’T ANSWER [M-25]: unlimited
14. The following are detailed examples...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 921
Multiple Call Forwarding - Busy Line - CCIS M-41
Service Conditions (cont’d)
b.) The service is restricted because the service has already been activated the predetermined number
of times.
c.) When Office A is not available for the enhanced Call Forwarding feature, the number of times the
service is activated is decided by Office B (three times are effective in this example). Note that
Call Forwarding service from Office A to Office B...

NEAX2400 IMX Feature Programming Manual
Page 922ND-70184 (E), Issue 3
M-41 Multiple Call Forwarding - Busy Line - CCIS
Service Conditions (cont’d)
d.) The Call Forwarding service is activated four times, because the call is forwarded from Office D
to Office E through FCCS link:
Note:
Call Forwarding service activated through FCCS link (C.F.*) is not included in the number of times that the Multiple
Call Forwarding - CCIS service is activated.
e.) When the trunk/station incoming call terminates through...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 923
Multiple Call Forwarding - Busy Line - CCIS M-41
Service Conditions (cont’d)
f.) This service is restricted when a call from the CCIS line is forwarded to other lines except CCIS
(for example: C.O. line).
Interactions
When a calling party sets the services shown below while the destination party is in busy status, the services are
performed to the first forwarded party.
1. In the case of Busy Verification - CCIS [B-9] or Executive...

NEAX2400 IMX Feature Programming Manual
Page 924ND-70184 (E), Issue 3
M-41 Multiple Call Forwarding - Busy Line - CCIS
Interactions (cont’d)
3. In the case of Call Back - CCIS [C-44], service is effective to Station B in Office B. The service is invalid
to station D.
4. In the case of Step Call - CCIS [S-59], the service is valid to Station B in Office B. The service is invalid
to station D.
Programming
STEP 1:ASYD - System 1, Index 5, Bit 0: Access Code for Call Forwarding - Busy Line and Call...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 925
Multiple Call Forwarding - Busy Line - CCIS M-41
Programming (cont’d)
System 1, Index 69, Bit 7: (1) Multiple Call Forwarding in service.
SYS 1, INDEX 486, bit 0-2. The maximum number of times for activating Call Forwarding - CCIS
service (0 to 7 times: 01Hex-07Hex)
When assigning “0 (default)”, the Release 7 software enhancement is not available (the call forwarding
is activated between CCIS nodes only one time). Also, when assigning...

NEAX2400 IMX Feature Programming Manual
Page 926ND-70184 (E), Issue 3
M-42 Multiple Call Forwarding - Don’t Answer - CCIS
M-42  Multiple Call Forwarding - Don’t Answer - CCIS
General Description
This service permits a call to an unanswered station to be forwarded, multiple times, to a predesignated station that
does not have CALL FORWARDING-DON’T ANSWER [C-3] service set, or to the ATTENDANT CONSOLE
[A-3] in a CCIS network.
1. With existing CALL FORWARDING-DON’T ANSWER [C-3] (CF-D) service:
2. With...