NEC Neax 2400 Imx Feature Programming Manual

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 957
Outgoing Trunk Queuing - CCIS O-12
Operating Procedure (cont’d)
7. Station (b) goes off-hook and is connected to the Public Switched Telephone Network. Station (b) receives
ringback tone while Station (c) is rung.
Service Conditions
1. After an OUTGOING TRUNK becomes available, the user’s station will ring for 20 seconds. If not
answered within that time, the station will be automatically dropped from the queue.
2. When this feature...

NEAX2400 IMX Feature Programming Manual
Page 958ND-70184 (E), Issue 3
O-12 Outgoing Trunk Queuing - CCIS
Programming (cont’d)
System 2, Index 4, Bit 0: Call Back and OG Trunk Queuing access code. 0/1 = Separate/Common.
Bit 1: Automatic setting of OG Trunk Queuing by On-Hook. 0/1 = Not Required/Required.
Note:
0 = SHF + Access Code.
System 3, Index 3, Bit 5: 3-Burst on the time above Ringer Patter. 0/1 = Not Required/Required.
System 3, Index 7: Assign OGQ Ring Back Pattern. 
STEP 2:ANPD - Assign minimum...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 959
Paging Access - CCIS P-28
P-28  Paging Access - CCIS
General Description
This feature provides dial access to paging equipment from an ATTENDANT CONSOLE [A-3] or station through
the CCIS network.
Operating Procedure
To access Paging through CCIS: 
1. Lift the handset and receive dial tone. 
2. Dial the office code and the Paging access code. 
3. Connection to paging equipment is established.
Service Conditions
1. Paging equipment must...

NEAX2400 IMX Feature Programming Manual
Page 960ND-70184 (E), Issue 3
P-28 Paging Access - CCIS
Interactions (cont’d)
10. BUSY is displayed on the 16-button Dterm LCD display when the paging trunk is busy. Reorder tone is
returned.
11. If Priority Page is to be used with PAGE ACCESS; in ARTD, CDN 6:TCL must be assigned as Data 8,
Page with ringback tone. SYS1, Index 73 affects the operation of page routes assigned Page with ringback
tone. Therefore, if Priority Page is used with PAGE ACCESS then MEET ME...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 961
Restriction from Outgoing Calls - CCIS R-22
R-22  Restriction from Outgoing Calls - CCIS
General Description
This feature automatically restricts preselected stations from placing certain outgoing calls through CCIS without
Attendant assistance.
Operating Procedure
No manual operation is required. Restricted stations will receive reorder tone when trying to place a restricted call.
Service Conditions
1. This feature is programmed in...

NEAX2400 IMX Feature Programming Manual
Page 962ND-70184 (E), Issue 3
R-22 Restriction from Outgoing Calls - CCIS
Interactions (cont’d)
4. THREE-WAY CALLING [T-2]: Station A cannot include restricted Station B in a THREE-WAY
CALLING connection with Route 1.
5. DAY/NIGHT CLASS OF SERVICE [D-15]: Restricted Station B may be allowed access to Route 1 when
the system is placed in the Night mode. See DAY/NIGHT CLASS OF SERVICE [D-15].
6. RESTRICTION FROM OUTGOING CALLS are constructed on a per-route...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 963
Serial Call - CCIS S-52
S-52  Serial Call - CCIS 
General Description
This service feature is the Inter-Office serial call service to be provided when the ATTCON and the called party
respectively, belong to a different PBX (Main PBX Satellite PBX) in the CCIS network.
Operating Procedure
1. Station (c) in the Public Switched Telephone Network places a call to Node A and receives ringback tone.
The Attendant in Node A receives an...

NEAX2400 IMX Feature Programming Manual
Page 964ND-70184 (E), Issue 3
S-52 Serial Call - CCIS
Operating Procedure (cont’d)
3. The Attendant dials Station (b1) in Node B; receives ringback tone. Station (b1) is rung and Station (c)
receives Hold Tone.
4. The Attendant presses the Serial Call (SC) key and Station (c) receives ringback tone. The HOLD and
RING status are shown on the Attendant Console.
STN (a)ATT
[Node A]CCIS
[Node B]STN (b1)
STN (b2) RBTHT
RG
HT
RBT
PUBLIC 
SWITCHED 
TELEPHONE 
NETWORK
RBT...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 965
Serial Call - CCIS S-52
Operating Procedure (cont’d)
5. Station (b1) answers and is connected with Station (c). The HOLD status remains on the Attendant
Console.
6. Station (b1) hangs up. On the Attendant Console, the lamps in the loop key section corresponding to the
incoming call keep flashing at 60 ipm, and the bell rings. Station (c) receives ringback tone.
7. The Attendant presses the loop key corresponding to the flashing lamps....

NEAX2400 IMX Feature Programming Manual
Page 966ND-70184 (E), Issue 3
S-52 Serial Call - CCIS
Service Conditions (cont’d)
5. This feature is not applicable for tandem connections.
6. The following services cannot be used while SERIAL CALL - CCIS is activated:
ATTENDANT CAMP-ON WITH TONE INDICATION - CCIS [A-45]
BUSY VERIFICATION - CCIS [B-9]
CALL HOLD - CCIS / CALL HOLD - D
term[C-6/C-6D]
EXECUTIVE RIGHT-OF-WAY [E-8]
Programming
ASYD - System 1, Index 43, Bit 4:(1): Allow ATT to reenter loop on serial...