NEC Neax 2400 Imx Feature Programming Manual

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 507
MF Signaling - DID M-84
Programming (cont’d)
STEP 9:AOP R - Assign the route number, including the alternative route to the outgoing route selection
pattern (OPR). Assigns the number of skipped digits and pattern number location (PNL) to each route.
STEP 10:ARSC - Release the dummy route and station connection restriction. 
Release the connection restriction on the route of the MF line and station.
FCCS Programming 
This data setting...

NEAX2400 IMX Feature Programming Manual
Page 508ND-70184 (E), Issue 3
M-85D Message Waiting Indication - Dterm
M-85D  Message Waiting Indication - Dterm
General Description
This feature allows Message Waiting (MW) information to be displayed on the middle line (24 digits) of the LCD.
Operating Procedure
No manual operation is required.
Service Conditions
1. The LCD displays the following information, when MESSAGE WAITING INDICATION - Dterm is
activated:
2. When this service is assigned to a D
term with a...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 509
MF ANI to SMDR M-101
M-101  MF ANI to SMDR
General Description
This feature allows an office receiving ANI information by means of MF signal to output the information to the
expanded SMDR area.
Operating Procedure
No manual operation is required.
Service Conditions
1. Output conditions are same as current conditions of MF ANI. (i.e., charging information for incoming
calls is output only).
2. About the expanded output format, refer to...

NEAX2400 IMX Feature Programming Manual
Page 510ND-70184 (E), Issue 3
M-101 MF ANI to SMDR
Programming (cont’d)
System Data 1, Index 288, Bit 5. Expanded SMDR Output for SMDR A Apparatus. 0/1 = Out/In
Service.
System Data 1, Index 290, Bit 5. Expanded SMDR Output for SMDR B Apparatus. 0/1 = Out/In
Service.
System Data 1, Index 292, Bit 5. Expanded SMDR Output for SMDR C Apparatus. 0/1 = Out/In
Service.
System Data 1, Index 294, Bit 5. Expanded SMDR Output for SMDR D Apparatus. 0/1 = Out/In
Service....

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 511
MF ANI to SMDR M-101
FCCS Programming  (cont’d)
When Calling Number is output to SMDR, the following expanded format is used.
System Data 1, Index 288, Bit 5. Expanded SMDR Output for SMDR A Apparatus. 0/1 = Out/In
Service.
System Data 1, Index 290, Bit 5. Expanded SMDR Output for SMDR B Apparatus. 0/1 = Out/In
Service.
System Data 1, Index 292, Bit 5. Expanded SMDR Output for SMDR C Apparatus. 0/1 = Out/In
Service.
System Data 1,...

NEAX2400 IMX Feature Programming Manual
Page 512ND-70184 (E), Issue 3
N-1 Night Connection - Fixed
N-1 Night Connection - Fixed
General Description
This feature routes calls normally directed to the ATTENDANT CONSOLE [A-3] to a preselected common station
within the system when the Night Mode has been entered.
Operating Procedure
To answer NIGHT CONNECTION calls:
1. The incoming calls to the ATTENDANT CONSOLE [A-3] in the night mode are automatically
transferred to a preselected NIGHT CONNECTION - FIXED...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 513
Night Connection - Fixed N-1
Interactions (cont’d)
5. When the NIGHT CONNECTION - FLEXIBLE [N-2] feature is provided, assignments can be made by
the ATTENDANT CONSOLE [A-3] or NIGHT CONNECTION - FIXED station by use of the CALL
FORWARDING - ALL CALLS [C-5] feature.
6. CALL FORWARDING - BUSY LINE/DONT ANSWER [C-2, 3]: A Night user can activate the CALL
FORWARDING - BUSY LINE/DONT ANSWER [C-2, 3] feature if available to the user. A call...

NEAX2400 IMX Feature Programming Manual
Page 514ND-70184 (E), Issue 3
N-1 Night Connection - Fixed
Programming
STEP 1:ASYD - System Data 1, Index 147. DIT supervisory timer for a busy station. How often will the CPU
look at the Idle/Busy status of the station for rerouting the DIT call to the destination? Always leave
this index as 00H.
For NIGHT CONNECTION-FIXED Only.
STEP 2:ACSI - Assign Route Number, Trunk Number, Connection Service Index of “4” for NIGHT
CONNECTION-FIXED, and the Tenant Number and...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 515
Night Connection - Flexible N-2
N-2  Night Connection - Flexible
General Description
This feature provides arrangements to route calls, usually directed to the ATTENDANT CONSOLE [A-3], instead
to a preselected station on a flexible, assignable basis within the system, when the Night Mode has been entered.
Operating Procedure
1. Answering the operation is the same as that for NIGHT CONNECTION - FIXED [N-1]. 
2. Each evening, before...

NEAX2400 IMX Feature Programming Manual
Page 516ND-70184 (E), Issue 3
N-3 Non-delay Operation
N-3 Non-delay Operation
General Description
This feature allows the ATTENDANT CONSOLE [A-3] to place any calling party on hold, dialing the call, and
connecting the calling and called parties.
Operating Procedure
1. The Attendant answers an operator call by pressing the ANSWER or ATND key. 
2. Press the START key. 
3. Dial the exchange network access code.
4. Dial the desired telephone number. 
5. Press the...