NEC Neax 2400 Imx Feature Programming Manual

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 187
Centralized Attendant Service (CAS) C-20
Operating Procedure (cont’d)
Remote Hold:
1. The Attendant converses with a central office party.
2. The Attendant operates the SHF key; hears special dial tone.
3. The Attendant dials the Remote Hold access code (one or two digits); the central office party is placed in
the hold state at the satellite system, and the Attendant hears the hold confirmation tone (five, 50 msec.
bursts of 440...

NEAX2400 IMX Feature Programming Manual
Page 188ND-70184 (E), Issue 3
C-20 Centralized Attendant Service (CAS)
Service Conditions (cont’d)
2. RLTs can be seized in one direction only; from the satellite PBX to the main PBX.
3. The Attendant cannot originate or INTER-POSITION TRANSFER [I-5] a call on an RLT.
4. The Attendant cannot extend an incoming CAS call to a station, trunk, or another Attendant in the main
system.
5. CALL PROCESSING INDICATION [C-8] is not provided to the Attendant serving the...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 189
Centralized Attendant Service (CAS) C-20
Interactions (cont’d)
9. When the Night stations are located at the satellite PBX and no Attendant Console is provided, a Night
key must be installed at the satellite location to activate night service. When the key is operated, the CAS
operations are suspended, and incoming calls are terminated at the NIGHT CONNECTION FIXED/
FLEXIBLE station(s) [F-1, 2] or via TRUNK ANSWER FROM ANY STATION...

NEAX2400 IMX Feature Programming Manual
Page 190ND-70184 (E), Issue 3
C-20 Centralized Attendant Service (CAS)
Programming (cont’d)
STEP 4:ACSI - Assign the Incoming CAS Route and Trunk to the Night Station and Tenant number. Assign
the CSI = 4 for Night Connection.
TAS
STEP 1:ANPD - Reserve a number level for feature access.
STEP 2:ASPA - Assign an access code to TRUNK ANSWER ANY STATION, SRV = SSC (Service Code);
SID = 16. Assign for a Connection Status Index (CI) of Normal (N).
STEP 3:ACFR -...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 191
Centralized Attendant Service (CAS) C-20
Programming (cont’d)
STEP 8:ACFR - Assignment of Call Forwarding Restriction. Upon determining which types of Call Class
Indexes (CCI) will be answered at the Main system, such as LDN (DDD), WATS, FX; allow those
CCI a Transfer Service Feature Index of 15, CAS Line.
STEP 9:ACSA - (Optional) Use this command rather than ACSI if CAS operation is desired in Day mode, and
if incoming trunks are to...

NEAX2400 IMX Feature Programming Manual
Page 192ND-70184 (E), Issue 3
C-21 Code Calling Access
C-21 Code Calling Access
General Description
This feature provides the ATTENDANT CONSOLE [A-3] and users dial access to Code Calling equipment.
Operating Procedure
1. Go off hook; receive dial tone.
2. Dial the CODE CALLING ACCESS code.
3. Dial the code number for the unit desired.
Service Conditions
1. Amplifiers, speakers, and Code Calling units must be provided by the customer.
2. Loop Start Central Office...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 193
Called Station Status Display - DtermC-22D
C-22D  Called Station Status Display - Dterm
General Description
This feature provides for the status of a called station to appear on the LCD display of a calling Dterm.
Operating Procedure
Lift handset or press SPEAKER key; dial desired station. The LCD display indicates the status of the called station.
Service Conditions
1. If the called station is idle, the display flashes its number...

NEAX2400 IMX Feature Programming Manual
Page 194ND-70184 (E), Issue 3
C-24D Calling Number Display - Dterm
C-24D Calling Number Display - Dterm
General Description
This feature provides for the station and trunk number of an incoming call to appear on the Dterms LCD display.
This display will flash while the call is ringing, then appear steady when the call is answered.
Operating Procedure
No manual operation is required.
Service Conditions
1. When a call terminates on a line other than the PRIME LINE...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 195
Call Forwarding-Intercept / Announcement C-25
C-25  Call Forwarding-Intercept / Announcement
General Description
This feature provides for interception of STATION-TO-STATION [S-11], DIRECT INWARD DIALING [D-8],
Attendant-to-Station and CCSA [C-14] calls that cannot be completed (unassigned station, level, etc.). These calls
are automatically routed to a recorded announcement informing the caller that an inoperative number was reached...

NEAX2400 IMX Feature Programming Manual
Page 196ND-70184 (E), Issue 3
C-25 Call Forwarding-Intercept / Announcement
Service Conditions (cont’d)
15. Automatic OUTGOING TRUNK QUEUING [O-2], OFF-HOOK QUEUING [O-7] and ROUTE
ADVANCE [R-6] are mutually exclusive with this feature. These features take priority over OUTGOING
TRUNK BUSY - ANNOUNCEMENT [O-21].
16. ANNOUNCEMENT SERVICE is provided to FCCS nodes that have no announcement trunk using the
trunk in the remote node.
17. When CALL FORWARDING -...