NEC Neax 2400 Imx Callcenterworx Enterprise Acd System Manual

CHAPTER 4 NDA-24282
Pag e 4 2
Revision 1.0
SWITCH SETTING OF ACD CIRCUIT CARDS
2. EXPLANATION OF ACD CIRCUIT CARDS
This section explains each of the ACD circuit cards regarding the following items.
1. Function
Explanations are given about the functional outline and the purpose of each circuit card.
2. Mounting Location/Condition
The mounting location of each circuit card is illustrated with the mounting module name, slot number, etc.
Any conditions pertaining to mounting are also denoted.
3. Face Layout...

NDA-24282 CHAPTER 4
Page 43
Revision 1.0
PA - C P 5 3  ( C P U )
PA-CP53 (CPU)
1. Function
This circuit card is the CPU card (Central Processing Unit) which controls the ACD Circuit Card Type Sys-
tem. Using V60 microprocessor (32 bits), this CPU card provides programs and data memory. The card is
equipped with EPROM of 2MB and SRAM of 1MB, respectively.
GATE
I/O LOCAL BUS
RS-232C (Non-protocol)
ACD-MISEAPI
CPUACDP
LPRJ-A
ACD in IMX system (Circuit Card Type)
Position within the systemSYSTEM 

CHAPTER 4 NDA-24282
Pag e 4 4
Revision 1.0
PA-CP53 (CPU)
2. Mounting Location/Condition
The mounting locations of this circuit card and the conditions related to mounting are shown below.
(a) When this circuit card is mounted in PIMA
(b) When this circuit card is mounted in PIMB
00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23
Mounting Module PIMU
Note:
 indicates the mounting locations of this circuit card.
00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23...

NDA-24282 CHAPTER 4
Page 45
Revision 1.0
PA - C P 5 3  ( C P U )
3. Face Layout of Lamps, Switches, and Connectors
The face layout of lamps, switches, and connectors of this circuit card is shown below.
4. Lamp Indications
The contents of lamp indications of this circuit card are shown in the table below.
Note:When this circuit is used only as ACDP, PA-CC98 card is not used and thus this card is operating normally
even if this lamp is lighting.
LAMP NAME COLOR STATE 
CPU OPE  Green Remains lit while this...

CHAPTER 4 NDA-24282
Pag e 4 6
Revision 1.0
PA-CP53 (CPU)
5. Switch Settings
Standard settings of various switches on this circuit card are shown in the table below.
SWITCH
NAMESWITCH
NO.SETTINGSTANDARD
SETTINGMEANING
MBRUP Circuit card make busy request.
DOWN Circuit card make busy request cancel
RESET PUSH Starting of reset of this circuit card
SENSE5×On line (Normal Operation)
DClearing the data memory area at the time of 
initialization
SW01OFF×Fixed
2OFF×Fixed
3OFF×Fixed
4OFF×Fixed
5OFF×Fixed...

NDA-24282 CHAPTER 4
Page 47
Revision 1.0
PA - C P 5 3  ( C P U )
SW21ON×Internal NMI possible
OFF Internal NMI inhibited
2ON×Data Memory Write Protect cancel
OFF Data Memory Write Protect controllable
3ON Data Memory Write inhibited
OFF×Data Memory Write controllable
4ON When connecting PA-CC98 card
OFF When not connecting PA-CC98 card
5OFF×Fixed
6OFF×Fixed
7OFF×Fixed
8OFF×Fixed
SWITCH
NAMESWITCH
NO.SETTINGSTANDARD
SETTINGMEANING 

CHAPTER 4 NDA-24282
Pag e 4 8
Revision 1.0
PA-CP53 (CPU)
SWITCH SETTING SHEET
MODULE SLOT NO.SWITCH 
NAMESWITCH SHAPE REMARKS
PIM any 
universal 
slotMBR UP: Circuit card make 
busy request
DOWN: Circuit card make 
busy request cancel
RESET
SENSE
SW0
SW1 7 = ON for IMX
7 = OFF for ICS
SW2 4 ON When connecting 
PA -C C 9 8
ON
ON
12345678
ON
12345678
ON
12345678 

NDA-24282 CHAPTER 4
Page 49
Revision 1.0
PH-PC22 (EAPI)
PH-PC22 (EAPI)
1. Function
This circuit card is an I/O system functions integrated card to be used in the ACD Circuit Card Type System.
This card supports the following functions.
(a) APINT Function: For processor communications between the CPU of the System and ACDP card,
this circuit card provides FIFO for mutual I/O bus connections. 
(b) IOC Function: For ACD-MIS connection, this circuit card provides a serial interface which conforms
with...

CHAPTER 4 NDA-24282
Pag e 5 0
Revision 1.0
PH-PC22 (EAPI)
3. Face Layout of Lamps, Switches, and Connectors
The face layout of lamps, switches, and connectors of this circuit card is shown below.
00 01 02 03 04
Mounting Module LPRJ-A
PHPC-22
PHPC-22
PHPC-22
Note
CPRAC-0 CPRAC-1
Note:This circuit card is mounted in any one of Slot No. 00~02
IOC OPE 
CLKALM
OPE/MB
MB
SW0
SW01
SW11
MBR 

NDA-24282 CHAPTER 4
Page 51
Revision 1.0
PH-PC22 (EAPI)
4. Lamp Indications
The contents of lamp indications of this circuit card are shown in the table below.
5. Switch Settings
Standard settings of various switches on this circuit card are shown in the table below.
LAMP NAME COLOR STATE
OPE/MB Green Remains lit while this circuit card is operating.
IOCOPE Red Remains lit while the non-protocol/RS-232C Port Controller is operating normally. 
CLKALM Red Lights when a clock failure has occurred.
SWITCH...