NEC Neax 2400 Imx Business Features And Specifications

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 241
Executive Right-of-Way E-1
E-1 Executive Right-of-Way
General Description
This feature enables selected users, upon encountering a busy condition at an internal station, to bridge into the busy
connection.
Operating Procedure
To enter a busy connection: 
1. Dial the busy station; receive busy tone.
2. Switch hook flash; receive special dial tone. 
3. Dial the EXECUTIVE RIGHT-OF-WAY access code; warning tone is sent.
4. The...

NEAX2400 IMX Business Features and Specifications
Page 242NDA-24221, Issue 3
E-1 Executive Right-of-Way
Service Conditions (cont’d)
4. If one party disconnects after the three-way conference bridge is established, the remaining two parties
will still be connected.
5. The EXECUTIVE RIGHT-OF-WAY access code may be assigned according to customer preference.
6. The maximum number of simultaneous Executive Overrides allowable is dependent on the number of
conference function trunks in the system. (Conference...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 243
Executive Right-of-Way - DtermE-1D
E-1D Executive Right-of-Way - Dterm
General Description
This feature enables selected Dterm users, upon encountering a busy condition at an internal station, to bridge into
the busy connection after transmitting a warning tone.
Operating Procedure
To enter a busy connection from a Dterm: 
1. Dial the busy station; receive busy tone. 
2. Press the EXECUTIVE RIGHT-OF-WAY OVER key; the associated...

NEAX2400 IMX Business Features and Specifications
Page 244NDA-24221, Issue 3
E-1D Executive Right-of-Way - Dterm
Service Conditions (cont’d)
EXCLUSIVE HOLD - Dterm[E-4D] 
NON-EXCLUSIVE HOLD - Dterm[N-7D] 
OFF-HOOK QUEUING  [O-7, O-11] 
OUTGOING TRUNK QUEUING [O-2, O-2D] 
PRIVACY - D
term[P-14D]
PRIVACY RELEASE [P-18] 
THREE-WAY CALLING  [T-2, T-2D] 
VOICE CALL  [V-2, V-7] 
VOICE CALL - D
term[V-2D]
Data Call through Data Adapter / Data Call through Data Module
Note:In any of the above instances, the...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 245
Elapsed Time Display - DtermE-3D
E-3D Elapsed Time Display - Dterm
General Description
This feature provides an LCD display of the time elapsed while a Dterm is connected to any trunk.
Operating Procedure
No manual operation is required.
Service Conditions
1. The ELAPSED TIME is displayed in the eight left-side positions of the LCD display.
2. The ELAPSED TIME can reach a maximum of 9 hours, 59 minutes and 59 seconds. After...

NEAX2400 IMX Business Features and Specifications
Page 246NDA-24221, Issue 3
E-4D Exclusive Hold - Dterm
E-4D Exclusive Hold - Dterm
General Description
This service feature allows a user to place a call on hold and to exclude all other users from retrieving the held call.
Operating Procedure
While a call is in progress: 
1. Press the HOLD key twice; the LCD displays:
                                                                     Held Station or Trunk
2. To return to the held call, press the held...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 247
Emergency Call E-11
E-11 Emergency Call
General Description
This feature allows a user to make an EMERGENCY CALL by dialing a special telephone number (emergency
telephone number). Even if the calling station goes on-hook, the calling station is recalled and the speech path is
maintained until the emergency telephone goes on-hook. When a station dials the emergency telephone number, a
system message is printed out to report the...

NEAX2400 IMX Business Features and Specifications
Page 248NDA-24221, Issue 3
E-11 Emergency Call
Service Conditions (cont’d)
13. When the emergency station is busy, CALL BACK [C-1] to the emergency station is effective (no printout
is performed).
14. When the emergency station is busy, CALL WAITING - ORIGINATING [C-31] and CALL WAITING
- TERMINATING [C-12] are effective, but this service feature is not available. However, when a 2-way
call is made between an emergency station and another station, CALL...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 249
E911-ANI Unified Number Of Digits E-18
E-18 E911-ANI Unified Number Of Digits
General Description
This service unifies the number of ANI information digits sent out by E911-ANI service. 
Operating Procedure
The operating procedure is the same as for a normal outgoing connection.
Service Conditions
1. The ANI function for E911 outgoing connections is the same as in previous E911-ANI service and is
applicable to the following...

NEAX2400 IMX Business Features and Specifications
Page 250NDA-24221, Issue 3
E-18 E911-ANI Unified Number Of Digits
Service Conditions (cont’d)
 If ANI data is unassigned:
KP-1
-ST
5. An independent route is required for E911 interface.
6. After the caller’s number is sent to the distant office by E911-ANI, it takes some time until a speech path
is established.
7. Sending data is considered to be not assigned if:
a.) Service version data specifies that Unified Number of Digits is provided,
b.) No data...