NEC Neax 2400 Imx Business Features And Specifications

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 251
Expanded Multiple Line Operation - DtermE-26
E-26  Expanded Multiple Line Operation - Dterm
          (Series 7400 software feature)
General Description
This feature allows operation of whichever lines from ELC card(s) in the same IMG or in different IMGs in the same
node, as a Dterm’s programmable Multiple Lines (My Line + Prime Line/Sub Lines). While Multiple Line Operation
- Dterm [M-20] only allows such a programming within...

NEAX2400 IMX Business Features and Specifications
Page 252NDA-24221, Issue 3
E-26 Expanded Multiple Line Operation - Dterm
Service Conditions (cont’d)
b.) PA-16ELCJ-B, SW10, Element 1 = OFF: A  Dterm, accommodated on this card, and the other
Lines (other analog telephone/Dterm) can be in
different IMGs (but in the same node). For more
details on the PA-16ELCJ-B circuit card, refer to the
NEAX2400 IMX Circuit Card Manual.
Note:Even when Element 1 of SW10 is ON, data programming for this feature (Multiple...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 253
Expanded Multiple Line Operation - DtermE-26
Interactions (cont’d)
Serial Call [S-15]
Serial Call - Loop Release [S-64]
Serial Call - CCIS [S-52]
Serial Call - D
term[S-127]
Executive Right-of-Way [E-1, 1D]
Call Back [C-1, 1D]
Message Reminder [M-19, 19D]
Brokerage - Hot Line [B-6]
Split Call Forwarding [S-99]
Call Waiting - Terminating [C-12]
Call Waiting - Answer - D
term[C-27D]
Call Waiting - Originating [C-31]...

NEAX2400 IMX Business Features and Specifications
Page 254NDA-24221, Issue 3
F-1 Flexible Numbering of Stations
F-1 Flexible Numbering of Stations
General Description
This feature provides the ability to assign telephone numbers of the voice station and data station to any
corresponding instrument location, depending solely upon numbering plan limitations.
Operating Procedure
Refer to the NEAX2400 IMX Office Data Specification.
Service Conditions
1. Careful consideration should be given to any numbering...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 255
FX Access F-2
F-2 FX Access
General Description
This feature provides dial access to distant Central Offices using Foreign Exchange (FX) trunks. All incoming calls
to the NEAX2400 IMX from the FX Central Office area are placed to the listed Foreign Exchange Directory number
and are answered by the Attendant in a manner similar to LDN service. Outgoing calls can be made on an Attendant
handled basis using direct or dial access...

NEAX2400 IMX Business Features and Specifications
Page 256NDA-24221, Issue 3
F-2 FX Access
Interactions (cont’d)
6. When the system is in the night mode of operation, incoming FX calls can be answered using NIGHT
CONNECTION - FIXED [N-1], FLEXIBLE [N-2] or TRUNK ANSWER FROM ANY STATION [T-8]
feature.
7. DIRECT INWARD DIALING [D-8] is not provided for FX trunks. All calls are normally routed to the
Attendant, UCD group, or a CAS Attendant.
8. Outgoing FX trunk calls can be restricted from preselected...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 257
Flash Button - DtermF-3D
F-3D Flash Button - Dterm
General Description
This feature provides for a Dterm set to program one of the programmable line/feature keys to function as a FLASH
BUTTON. The FLASH BUTTON will function in the manner a switch hook flash does for a single-line set.
Operating Procedure
When activating features common to both Dterm and single-line sets:
1. Press the FLASH BUTTON to receive special dial tone,...

NEAX2400 IMX Business Features and Specifications
Page 258NDA-24221, Issue 3
F-4D Flash Entry - Dterm
F-4D Flash Entry - Dterm
General Description
This feature allows a Dterm user to insert a switch hook flash as the first digit in a stored SPEED CALLING-ONE
TOUCH-Dterm [S-26D] number.
Operating Procedure
To add a flash to a stored SPEED CALLING-ONE TOUCH-Dterm [S-26D] number to a Dterm: 
1. Stay on-hook.
2. Press the Feature key and the SPEED CALLING-ONE TOUCH-D
term [S-26D] key; the LCD display will...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 259
Flash Entry - DtermF-4D
Service Conditions (cont’d)
2. A FLASH ENTRY, stored as a flash, may be used only once, unless digits are dialed between use.
Interactions
Refer to the NEAX2400 IMX Office Data Specification, ASYD, System Data 3, Index 2 for programming the
characteristics of a switch hook. 

NEAX2400 IMX Business Features and Specifications
Page 260NDA-24221, Issue 3
F-5D Flexible Ringing Assignment - Dterm
F-5D Flexible Ringing Assignment - Dterm
General Description
This feature enables Dterm line appearances to be individually programmed for ringing, not ringing, ringing (day
only), or ringing (night only).
Operating Procedure
No manual operation is required once FLEXIBLE RINGING ASSIGNMENT has been programmed in System
Data.
Service Conditions
1. Recall ringing supersedes all ringing...