NEC Neax 2400 Imx Business Features And Specifications

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 151
Call Forwarding - All Calls - Outside C-28
Operating Procedure (cont’d)
To cancel CALL FORWARDING - ALL CALLS - OUTSIDE from a multi-line Dterm: 
1. Lift the handset or press the SPEAKER key; receive dial tone. Press the CALL FORWARDING - ALL
CALLS FORWARD feature key; receive service set tone. The LED of the associated feature key will go
out. The LCD displays:
2. Replace the handset or press the SPEAKER key.
Service...

NEAX2400 IMX Business Features and Specifications
Page 152NDA-24221, Issue 3
C-28 Call Forwarding - All Calls - Outside
Service Conditions (cont’d)
13. When the incoming call is forwarding to the public network, be sure to add the outgoing access code +
destination area code or the outgoing access code including destination area code number before dialing
subscriber number.
14. A call can be forwarded to a trunk in the remote node via FCCS link.
Interactions
1. A 24-digit limitation exists in memory for...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 153
Call Park C-29
C-29 Call Park
General Description
This feature enables the Attendant(s) or users to “Park” calls against their own extension numbers. Calls can easily
be retrieved from any station within the system.
Operating Procedure
To park a call from the ATTENDANT CONSOLE [A-3]: 
1. The Attendant presses the CALL PARK key; the CALL PARK number (individual Attendant number) is
automatically selected and displayed at the...

NEAX2400 IMX Business Features and Specifications
Page 154NDA-24221, Issue 3
C-29 Call Park
Service Conditions (cont’d)
CALL WAITING - ORIGINATING [C-31]
CALL WAITING - TERMINATING [C-12]
EXECUTIVE RIGHT-OF-WAY [E-1, E-1D]
10. A station in an ATTENDANT-CONTROLLED CONFERENCE [A-2] cannot be parked.
11. There is no limit to the number of calls that can be parked simultaneously within a system.
12. A parked call will recall to the station that has set the CALL PARK. The recall timer is preprogrammed
into...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 155
Call Pickup - Direct C-30
C-30  Call Pickup - Direct
General Description
This feature allows a user to pick up a call to any other station in the system by dialing a specific CALL PICKUP-
DIRECT code.
Operating Procedure
To pick up an incoming call:
1. Lift the handset; receive dial tone. 
2. Dial the CALL PICKUP - DIRECT code; receive special dial tone. 
3. Dial the specific telephone number to be picked up; incoming call is...

NEAX2400 IMX Business Features and Specifications
Page 156NDA-24221, Issue 3
C-31 Call Waiting - Originating
C-31 Call Waiting - Originating
General Description
This feature provides selected stations with Camp-On capability to a busy internal station.
Operating Procedure
To activate CALL WAITING - ORIGINATING: 
1. Dial the desired telephone number; receive busy tone. 
2. Switch hook flash, receive special dial tone, dial the CALL WAITING - ORIGINATING code; or press
the CW key on the D
term. 
3. Receive...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 157
Call Waiting - Originating C-31
Service Conditions (cont’d)
9. When the called station goes on-hook, the Call Waiting ringback tone changes to normal ringback tone to
the calling station.
10. CALL WAITING-ORIGINATING cannot be activated while in CONSULTATION HOLD [C-17] mode.
11. CALL WAITING-ORIGINATING cannot be used in conjunction with DIAL ACCESS TO
ATTENDANT [D-2]. 
12. CALL BACK [C-1] activation is denied if a call is...

NEAX2400 IMX Business Features and Specifications
Page 158NDA-24221, Issue 3
C-31 Call Waiting - Originating
Service Conditions (cont’d)
EXCLUSIVE HOLD - Dterm[E-4D]
EXECUTIVE RIGHT-OF-WAY  [E-1, E-8]
NON-EXCLUSIVE HOLD - D
term[N-7D]
OFF-HOOK QUEUING [O-7]
OUTGOING TRUNK QUEUING [O-2, O-2D]
PRIVACY - D
term [P-14D]
PRIVACY RELEASE [P-18]
THREE-WAY CALLING  [T-2, T-2D]
VOICE CALL - D
term[V-2D]
21. The following service features take precedence over CALL WAITING - ORIGINATING:
CALL FORWARDING - ALL CALLS...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 159
Consecutive Dialing - Attendant C-33
C-33 Consecutive Dialing - Attendant
General Description
This feature gives the ATTENDANT CONSOLE [A-3] the ability to generate DTMF signals while engaged in a
station/trunk connection. These DTMF signals are generated via the dial key pad of the ATTENDANT CONSOLE
[A-3].
Operating Procedure
No manual operation is required.
Service Conditions
1. The ATTENDANT CONSOLE [A-3] can transmit DTMF...

NEAX2400 IMX Business Features and Specifications
Page 160NDA-24221, Issue 3
C-59 Called Number Display - Attendant
C-59 Called Number Display - Attendant
General Description
If a call is transferred to the ATTENDANT CONSOLE [A-3] as a result of:
DO NOT DISTURB [D-11]
CALL FORWARDING - ALL CALLS [C-5]
CALL FORWARDING - BUSY LINE [C-2]
CALL FORWARDING - DONT ANSWER [C-3]
CALL FORWARDING - INTERCEPT/ ANNOUNCEMENT [C-25]
Information pertaining to the called station is displayed on the Attendant Console....