NEC Neax 2400 Imx Business Features And Specifications

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 161
Call Forwarding - Busy Line - Outside C-60
C-60  Call Forwarding - Busy Line - Outside
General Description
This feature allows a call that originates from a station or trunk, and is destined for a station to be routed to another
station outside the NEAX2400 IMX via the appropriate trunk line. This service feature can also be activated from a
D
term multi-line.
Operating Procedure
To set CALL FORWARDING - BUSY LINE - OUTSIDE:
1....

NEAX2400 IMX Business Features and Specifications
Page 162NDA-24221, Issue 3
C-60 Call Forwarding - Busy Line - Outside
Operating Procedure (cont’d)
2. Lift the handset or press the SPEAKER key; receive dial tone.
3. Press the CALL FORWARDING - BUSY LINE - OUTSIDE feature key; receive service set tone. The
LED of the associated feature key will go out. The LCD displays: 
4. Replace the handset or press the SPEAKER key.
Service Conditions
1. CALL FORWARDING - BUSY LINE - OUTSIDE may be set or cancelled by...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 163
Call Forwarding - Busy Line - Outside C-60
Service Conditions (cont’d)
12. When a caller places a call via OGCA (Outgoing Call Alternative) and when the first outgoing route and
the calling party are restricted, this service cannot be set. In this case, the service can be set via the
following procedure:
a.) assign a dummy route,
b.) clear the restriction between the dummy route and all the stations, and
c.) assign the dummy...

NEAX2400 IMX Business Features and Specifications
Page 164NDA-24221, Issue 3
C-62 Consecutive Speed Calling - System
C-62  Consecutive Speed Calling - System
General Description
This feature allows a user to call frequently dialed DID numbers using fewer digits (abbreviated call codes) than
would normally be required. The stored digits would include route access code, area code and office code. The caller
would then manually enter the called telephone number.
Operating Procedure
1. Dial the Speed Calling...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 165
Call Forwarding - All Calls - Announcement C-69
C-69  Call Forwarding - All Calls - Announcement
General Description
This feature permits all calls destined for a particular station to be routed to a recorded announcement. Activation
and cancellation may be accomplished by either the individual user or the ATTENDANT CONSOLE [A-3].
Operating Procedure
To activate CALL FORWARDING - ALL CALLS - ANNOUNCEMENT from an individual...

NEAX2400 IMX Business Features and Specifications
Page 166NDA-24221, Issue 3
C-69 Call Forwarding - All Calls - Announcement
Service Conditions (cont’d)
11. When a designation of CALL FORWARDING - ALL CALLS - ANNOUNCEMENT has already been
assigned, even if the feature is restricted by the new office data or changing of Day/Night mode, the
assigned data can still be used or cancelled. 

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 167
Call Back - Delayed C-73
C-73 Call Back - Delayed
General Description
This feature allows a station to which CALL BACK [C-1] has been set to initiate another call, within a
predetermined time period after becoming idle and before the CALL BACK [C-1] feature is activated.
Operating Procedure
No manual operation is required.
Service Conditions
1. This feature is assigned in system programming, on a system-wide basis.
2. The CALL...

NEAX2400 IMX Business Features and Specifications
Page 168NDA-24221, Issue 3
C-74 Call Forwarding - Don’t Answer - Outside
C-74  Call Forwarding - Don’t Answer - Outside
General Description
This feature allows a call which originates from a station or trunk, and is destined for a station, to be routed to another
station outside the NEAX2400 IMX via the appropriate trunk line. This service feature can also be activated from a
D
term multi-line.
Operating Procedure
To set CALL FORWARDING - DONT ANSWER -...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 169
Call Forwarding - Don’t Answer - Outside C-74
Operating Procedure (cont’d)
To cancel CALL FORWARDING - DONT ANSWER - OUTSIDE from a multi-line Dterm: 
1. Press the multi-line key for the station CALL FORWARDING - DONT ANSWER-OUTSIDE is to be
cancelled. 
2. Lift the handset or press the SPEAKER key; receive dial tone.
3. Press the CALL FORWARDING - DONT ANSWER - OUTSIDE feature key; receive service set tone.
The LED of the...

NEAX2400 IMX Business Features and Specifications
Page 170NDA-24221, Issue 3
C-74 Call Forwarding - Don’t Answer - Outside
Service Conditions (cont’d)
b.) When originating a call from a trunk: Restriction for tandem connections between the incoming
trunk and the outgoing trunk selected for the call where CALL FORWARDING - DONT
ANSWER service occurs.
10. There is no limit to the number of stations that may activate this feature simultaneously.
11. When the called station does not answer for a...