NEC Neax 2400 Imx Business Features And Specifications

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 141
Centralized Attendant Service (CAS) C-20
Service Conditions (cont’d)
2. RLTs can be seized in one direction only; from the satellite PBX to the main PBX.
3. The Attendant cannot originate or INTER-POSITION TRANSFER [I-5] a call on an RLT.
4. The Attendant cannot extend an incoming CAS call to a station, trunk, or another Attendant in the main
system.
5. CALL PROCESSING INDICATION [C-8] is not provided to the Attendant serving...

NEAX2400 IMX Business Features and Specifications
Page 142NDA-24221, Issue 3
C-20 Centralized Attendant Service (CAS)
Interactions (cont’d)
9. When the Night stations are located at the satellite PBX and no Attendant Console is provided, a Night
key must be installed at the satellite location to activate night service. When the key is operated, the CAS
operations are suspended, and incoming calls are terminated at the NIGHT CONNECTION FIXED/
FLEXIBLE station(s) [F-1, 2] or via TRUNK ANSWER FROM ANY...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 143
Code Calling Access C-21
C-21 Code Calling Access
General Description
This feature provides the ATTENDANT CONSOLE [A-3] and users dial access to Code Calling equipment.
Operating Procedure
1. Go off hook; receive dial tone.
2. Dial the CODE CALLING ACCESS code.
3. Dial the code number for the unit desired.
Service Conditions
1. Amplifiers, speakers, and Code Calling units must be provided by the customer.
2. Loop Start Central...

NEAX2400 IMX Business Features and Specifications
Page 144NDA-24221, Issue 3
C-22D Called Station Status Display - Dterm
C-22D  Called Station Status Display - Dterm
General Description
This feature provides for the status of a called station to appear on the LCD display of a calling Dterm.
Operating Procedure
Lift handset or press SPEAKER key; dial desired station. The LCD display indicates the status of the called station.
Service Conditions
1. If the called station is idle, the display flashes its...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 145
Calling Number Display - DtermC-24D
C-24D Calling Number Display - Dterm
General Description
This feature provides for the station and trunk number of an incoming call to appear on the Dterms LCD display.
This display will flash while the call is ringing, then appear steady when the call is answered.
Operating Procedure
No manual operation is required.
Service Conditions
1. When a call terminates on a line other than the PRIME...

NEAX2400 IMX Business Features and Specifications
Page 146NDA-24221, Issue 3
C-25 Call Forwarding-Intercept / Announcement
C-25  Call Forwarding-Intercept / Announcement
General Description
This feature provides for interception of STATION-TO-STATION [S-11], DIRECT INWARD DIALING [D-8],
Attendant-to-Station and CCSA [C-14] calls that cannot be completed (unassigned station, level, etc.). These calls
are automatically routed to a recorded announcement informing the caller that an inoperative number was...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 147
Call Forwarding-Intercept / Announcement C-25
Service Conditions (cont’d)
15. Automatic OUTGOING TRUNK QUEUING [O-2], OFF-HOOK QUEUING [O-7] and ROUTE
ADVANCE [R-6] are mutually exclusive with this feature. These features take priority over OUTGOING
TRUNK BUSY - ANNOUNCEMENT [O-21].
16. ANNOUNCEMENT SERVICE is provided to FCCS nodes that have no announcement trunk using the
trunk in the remote node.
17. When CALL FORWARDING -...

NEAX2400 IMX Business Features and Specifications
Page 148NDA-24221, Issue 3
C-26 Call Forwarding - Override
C-26 Call Forwarding - Override
General Description
This feature allows a target user (Station A) to call the station (Station B) which has set CALL FORWARDING -
ALL CALLS [C-5] to it. If the called station (Station B) has set the CALL FORWARDING - BUSY LINE [C-2] to
the calling station (Station A), the calling station (Station A) hears busy tone and can activate CALL BACK [C-1],
EXECUTIVE...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 149
Call Waiting - Answer - DtermC-27D
C-27D Call Waiting - Answer - Dterm
General Description
This service feature allows a Dterm user to answer a CAMPED-ON [A-1] or CALL WAITING [C-12, 31] call while
putting an existing call on HOLD [C-6], by pressing the ANSWER key.
Operating Procedure
CAMP-ON [A-1] or CALL WAITING [C-12, 31] to a busy Dterm is activated: 
1. The user hears Camp-On Indication Tone or Call Waiting Tone during a...

NEAX2400 IMX Business Features and Specifications
Page 150NDA-24221, Issue 3
C-28 Call Forwarding - All Calls - Outside
C-28  Call Forwarding - All Calls - Outside
General Description
This feature allows a call, which originates from a station or trunk and is destined for a station, to be routed to another
station outside the NEAX2400 IMX via the appropriate trunk line. This feature can also be activated from a Dterm
multi-line.
Operating Procedure
To set CALL FORWARDING - ALL CALLS - OUTSIDE: 
1. Lift...