NEC Neax 2400 Imx Business Features And Specifications

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 101
Call Hold C-6
Service Conditions (cont’d)
10. THREE-WAY CALLING [T-2]: This feature used in conjunction with the CALL HOLD feature, allows
the calling user to transfer a second call while holding the first call. After transferring the second call, the
calling user is rung back by the party on hold.
11. EXECUTIVE RIGHT-OF-WAY [E-1]: Executive Override of a station that has a call on HOLD and is
connected to another call is...

NEAX2400 IMX Business Features and Specifications
Page 102NDA-24221, Issue 3
C-6D Call Hold - Dterm
C-6D Call Hold - Dterm
General Description
This feature permits a Dterm user to HOLD a call in progress by using CALL HOLD - Dterm.
Operating Procedure
To hold a call in progress without using the HOLD key:
1. Press TRANSFER key; receive special dial tone. The LCD displays: 
2. Dial the CALL HOLD [C-6] code; receive normal dial tone.
3. The call in progress is held; the user may initiate a new call.
To...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 103
Call Hold - DtermC-6D
Operating Procedure (cont’d)
To operate a Dterm via the FLASH BUTTON [F-3D]:
1. When engaged in a conversation, press the programmable feature/line key programmed as a FLASH
BUTTON [F-3D]. The LCD will display:
2. Dial the CALL HOLD [C-6] access code; the LCD goes blank and dial tone is restored to the user.
Service Conditions
1. Lines freed through use of this feature may also be used for answering...

NEAX2400 IMX Business Features and Specifications
Page 104NDA-24221, Issue 3
C-7 Call Pickup - Group
C-7  Call Pickup - Group
General Description
This feature permits a user to answer any calls directed to other lines in the user’s preset CALL PICKUP - GROUP
by dialing a Pickup code.
A user can be assigned to an additional CALL PICKUP GROUP, referred to as EXPANDED CALL PICKUP
GROUP.
Operating Procedure
To pick up an incoming call: 
1. A station within the CALL PICKUP GROUP rings. 
2. Lift the handset;...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 105
Call Pickup - Group C-7
Service Conditions (cont’d)
12. The allowable station number type for a member of CALL PICKUP GROUP or CALL PICKUP
EXPAND GROUP is the telephone number only.
13. When using the FCH card with:
a.) Stations in up to a maximum of four different nodes can be assigned to a CALL PICKUP
GROUP or a CALL PICKUP EXPAND GROUP.
b.) When a CALL PICKUP GROUP/CALL PICKUP EXPAND GROUP has stations that belong to...

NEAX2400 IMX Business Features and Specifications
Page 106NDA-24221, Issue 3
C-7 Call Pickup - Group
Service Conditions (cont’d)
14. The number of CALL PICKUP GROUPs or CALL PICKUP EXPAND GROUPs is not limited.
15. A user cannot answer an incoming call to the station in another CALL PICKUP GROUP or CALL
PICKUP EXPAND GROUP.
16. Even if a station has been assigned to the existing CALL PICKUP GROUP or CALL PICKUP EXPAND
GROUP by Physical Station Number, the station can also be assigned to the same CALL...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 107
Call Pickup - Group C-7
Service Conditions (cont’d)
e.) A station can belong to one CALL PICKUP EXPAND GROUP only.
f.) No limitation is attached to the number of CALL PICKUP GROUPs/CALL PICKUP EXPAND
GROUPs per node.
g.) When multiple stations are ringing in a CALL PICKUP GROUP/CALL PICKUP EXPAND
GROUP, the calls won’t be picked up in the terminating order or in the assigned order of stations.
h.) A station cannot pick up a...

NEAX2400 IMX Business Features and Specifications
Page 108NDA-24221, Issue 3
C-7 Call Pickup - Group
Interactions (cont’d)
9. Stations denied access to a route via Route Restriction Class may not use CALL PICKUP GROUP to
answer restricted incoming trunk calls.
10. CALL PICKUP GROUP is not available for AUTOMATIC/MANUAL INTERCOM [A-30] or DIAL
INTERCOM [D-87] calls.
11. If more than one station line in a CALL PICKUP GROUP is ringing, the individual call answered is
selected by the system. The system...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 109
Call Pickup - Group - DtermC-7D
C-7D  Call Pickup - Group - Dterm
General Description
This feature permits a user to answer any call directed to another line in his preset CALL PICKUP - GROUP by
using a programmable line/feature key.
CALL PICKUP - GROUP - D
term may be used by seizing dial tone from any multi-line appearance on the Dterm.
A user can be assigned to an additional CALL PICKUP GROUP, referred to as EXPANDED CALL...

NEAX2400 IMX Business Features and Specifications
Page 110NDA-24221, Issue 3
C-7D Call Pickup - Group - Dterm
Service Conditions (cont’d)
6. CALL TRANSFER - ALL CALLS: The capability to pick up the recall of CALL TRANSFER - ALL
CALLS when CALL PICKUP - GROUP is activated, is not available.
7. There is no limit to the number of groups per system.
8. A user cannot pick up a call in the EXPANDED CALL PICKUP GROUP when engaged in another call.
9. The allowable station number type for a member of CALL PICKUP...