NEC Neax 2400 Imx Business Features And Specifications

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 81
Call Forwarding - Busy Line - DtermC-2D
C-2D  Call Forwarding - Busy Line - Dterm
General Description
This feature permits a call to a busy station to immediately be forwarded to a predesignated station, or to the
Attendant. CALL FORWARDING - BUSY LINE - Dterm may be set or cancelled by the user for all multi-line
appearances on the Dterm. Additionally, a single line user may set CALL FORWARDING - BUSY LINE - Dterm for
all...

NEAX2400 IMX Business Features and Specifications
Page 82NDA-24221, Issue 3
C-2D Call Forwarding - Busy Line - Dterm
Operating Procedure (cont’d)
To set CALL FORWARDING - BUSY LINE - Dterm to a Dterm multi-line:
1. Press the multi-line key for which CALL FORWARDING - BUSY LINE - Dterm feature is to be set.
2. Lift the handset or press the SPEAKER key; receive special dial tone.
3. Press the CALL FORWARDING - BUSY LINE “FORWARD-BY” feature key; receive special dial tone.
4. Dial the desired target...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 83
Call Forwarding - Busy Line - DtermC-2D
Service Conditions (cont’d)
3. This feature is assigned to stations through CLASS OF SERVICE - INDIVIDUAL [C-15] programming
in System Data.
4. There is no limitation to the number of stations that can set CALL FORWARDING - BUSY LINE [C-2]
simultaneously.
5. CALL FORWARDING - BUSY LINE - D
term may also be accessed via the dial pad or SPEED CALLING
- ONE TOUCH [S-22].
Note:If this feature...

NEAX2400 IMX Business Features and Specifications
Page 84NDA-24221, Issue 3
C-2D Call Forwarding - Busy Line - Dterm
Service Conditions (cont’d)
18. When a station sets CALL FORWARDING - ALL CALLS [C-5] to a pilot in a Hunt Group, and the pilot
activates CALL FORWARDING - BUSY LINE to another station, if the system parameters define the call
to hunt to the forwarded-to Station Hunt Group and all stations are busy, the calling party will hunt at the
called stations Hunt Group. If system parameters assign...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 85
Call Forwarding - Busy Line - DtermC-2D
Service Conditions (cont’d)
b.) When the calling party is the attendant console or the night station, and the destination of the
CALL FORWARDING - BUSY LINE service is also the attendant console or the night station.
26. SPLIT CALL FORWARDING [S-99] is available only when the calling party is the station or the CCIS
line.
27. The OAI monitor number and the ACD pilot number cannot be...

NEAX2400 IMX Business Features and Specifications
Page 86NDA-24221, Issue 3
C-3 Call Forwarding - Don’t Answer
C-3 Call Forwarding - Don’t Answer
General Description
This feature permits a call to an unanswered station to be forwarded to a predesignated station, or to the Attendant,
when the called station doesnt answer after a predetermined time interval. If the individual Call Forwarding - Don’t
Answer timer is not assigned, the default timer assigned by system data programming is used.
Operating...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 87
Call Forwarding - Don’t Answer C-3
Service Conditions (cont’d)
6. CALL FORWARDING - DONT ANSWER can be provided on either a tenant or an individual basis.
7. Individual CALL FORWARDING - DONT ANSWER takes precedence over tenant basis Call
Forwarding.
8. Call Forwarding on a tenant basis allows direct incoming trunk calls that encounter a Dont Answer
condition to be forwarded to a predetermined station or the ATTENDANT CONSOLE...

NEAX2400 IMX Business Features and Specifications
Page 88NDA-24221, Issue 3
C-3 Call Forwarding - Don’t Answer
Service Conditions (cont’d)
20. When a call is forwarded through FCCS link, the numbering plan of the originally called station must be
identical with the one of the forwarded Attendant Console.
21. If individual Call Forwarding - Don’t Answer timer is not given, the default timer assigned by ASYD
command is used.
Interactions
1. If access codes for CALL FORWARDING-BUSY LINE and CALL...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 89
Call Forwarding - Don’t Answer - DtermC-3D
C-3D  Call Forwarding - Don’t Answer - Dterm
General Description
This feature permits a call to an unanswered station to be forwarded to a predesignated station or to the Attendant,
if the called station does not answer within a predetermined period of time. CALL FORWARDING - DONT
ANSWER - D
term may be set or cancelled by the user for all multi-line appearances on the Dterm....

NEAX2400 IMX Business Features and Specifications
Page 90NDA-24221, Issue 3
C-3D Call Forwarding - Don’t Answer - Dterm
Operating Procedure (cont’d)
To monitor CALL FORWARDING - DONT ANSWER for a multi-line appearance other than the MY Line:
1. Press the CALL FORWARDING - DONT ANSWER FORWARD-NA key. The LCD displays:
Target Station 
To cancel CALL FORWARDING - DONT ANSWER from MY Line:
1. Lift the handset or press the SPEAKER key; receive dial tone.
2. Press the CALL FORWARDING - DONT ANSWER FORWARD-NA...