NEC Neax 2400 Imx Business Features And Specifications

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 71
Brokerage Hotline - Outside B-12
Service Conditions (cont’d)
15. The station, the Attendant Console / Desk Console (operator call), and the trunk can be a destination for
Hotline.
16. When Call Forwarding - All Calls/Busy Line/Don’t Answer service has been set to the called station, these
features are available for the call to the station.
17. When a calling party encounters a busy station, the call may bridge into the...

NEAX2400 IMX Business Features and Specifications
Page 72NDA-24221, Issue 3
B-17 Blind Transfer To Attendant
B-17 Blind Transfer To Attendant
General Description
This feature allows a station to transfer a held call (station or trunk) to the Attendant Console and hang up without
having to wait for the Attendant to answer.
Operating Procedure
1. While connected to another party (station or trunk), the user presses switch hook or TRANSFER key;
receives special dial tone.
2. User dials the access code for...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 73
Blind Transfer To Station B-18
B-18  Blind Transfer To Station
General Description
This feature allows two Class Marks to be assigned to stations, enabling services such as Voice Mail, announcement
machine, etc. depending on the Class Mark.
1. A Class Mark which allows No Answer timer to be extended when the Blind Transferred-to station does
not answer within the predetermined period of time interval.
2. A Class Mark which...

NEAX2400 IMX Business Features and Specifications
Page 74NDA-24221, Issue 3
C-1 Call Back
C-1 Call Back
General Description
This feature provides the ability for a calling station that has dialed a busy station to dial a CALL BACK code. When
this has been done, the calling station will be rung as soon as the busy station becomes available, provided the calling
station is also idle.
Operating Procedure
To set CALL BACK: 
1. Dial the desired telephone number; receive busy tone.
2. Press switch hook for...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 75
Call Back C-1
Interactions (cont’d)
3. CALL WAITING - ORIGINATE [C-31] automatic setting and CALL BACK are mutually exclusive.
4. CALL HOLD [C-6]: Activation of CALL BACK is not allowed if the calling or called station has a party
on CALL HOLD [C-6]. CALL BACK can be activated against a D
term that is holding a call or is being
held via EXCLUSIVE HOLD [E-4D] or NON-EXCLUSIVE HOLD [N-7D].
5. Call Back cannot be activated toward...

NEAX2400 IMX Business Features and Specifications
Page 76NDA-24221, Issue 3
C-1D Call Back - Dterm
C-1D Call Back - Dterm
General Description
This feature provides the ability for a Dterm, which has dialed a busy station, to press a CALL BACK key. When
this has been done, the calling station will be rung as soon as the busy station becomes available, provided that the
calling station is also free.
Operating Procedure
To set CALL BACK: 
1. Dial desired telephone number; receive busy tone.
2. Press the...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 77
Call Back - DtermC-1D
Service Conditions (cont’d)
3. CALL BACK to a busy station cannot be established if that station is in the LINE LOCKOUT [L-3] mode.
4. There is no time limit for CALL BACK. Once activated, it will remain in status memory until completed
or manually cancelled.
5. CALL BACK cannot be activated to more than one station at a time. (Calling party).
6. CALL BACK cannot be set by more than one station at a time....

NEAX2400 IMX Business Features and Specifications
Page 78NDA-24221, Issue 3
C-2 Call Forwarding - Busy Line
C-2 Call Forwarding - Busy Line
General Description
This feature permits a call to a busy station to be immediately forwarded to a predesignated station or to the
ATTENDANT CONSOLE [A-3].
If a called station is in a STATION HUNTING [S-7, 8, 9] Group and forwards calls to another Hunt Group, it can
be determined through System Data that the calling party has been directed either to the called...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 79
Call Forwarding - Busy Line C-2
Service Conditions (cont’d)
9. When MULTIPLE CALL FORWARDING - BUSY LINE [M-24] service is activated, hunting will be
performed at the last destination of the forwarded call, even though the multiple jumped stations are in a
Hunt Group.
10. When the pilot station of a STATION HUNTING [S-7, 8, 9] Group activates CALL FORWARDING -
BUSY LINE to a station (not a member of a Hunt Group) and system...

NEAX2400 IMX Business Features and Specifications
Page 80NDA-24221, Issue 3
C-2 Call Forwarding - Busy Line
Service Conditions (cont’d)
21. This service is available in the following occasions:
a.) When the destination of the CALL FORWARDING - BUSY LINE service is the calling station.
b.) When the calling party is the attendant console or the night station, and the destination of the
CALL FORWARDING - BUSY LINE service is also the attendant console or the night station.
22. SPLIT CALL FORWARDING [S-99]...