NEC Neax 2400 Imx Business Features And Specifications

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 31
Automatic/Manual Intercom A-30
Interactions
1. The RECALL key will not operate on an INTERCOM call.
2. THREE-WAY CALLING [T-6] must first be provided.
3. The AICD Command must be assigned before the AKYD command.
4. When assigning the PRI parameter in AKYD, the following data selections are available.
5. No programming is required to enable the SIG key to remain active at all times.
6. The SIG key, when pressed by a calling...

NEAX2400 IMX Business Features and Specifications
Page 32NDA-24221, Issue 3
A-52 Account Code - Attendant
A-52 Account Code - Attendant
General Description
This feature provides the ATTENDANT CONSOLE [A-3] with the capability to enter an Account Code into the
system after talking with a CO outgoing/incoming call.
Operating Procedure
The Attendant talks with the CO trunk call.
1. Press the START key.
2. Dial the Account Code feature access code. Service set tone is heard.
3. Dial the Account Code (up to...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 33
All Zone Paging A-53
A-53 All Zone Paging
General Description
This feature provides both the Attendant and a user with dial access to multiple zone paging equipment.
Operating Procedure
To operate from a station: 
1. The station goes off-hook; receives dial tone.
2. The station dials the ALL-ZONE PAGING access code. 
3. Connections to multiple paging equipment are established.
Service Conditions
1. This feature allows only...

NEAX2400 IMX Business Features and Specifications
Page 34NDA-24221, Issue 3
A-53 All Zone Paging
Interactions (cont’d)
8. ALL-ZONE PAGING is not possible from CONSULTATION HOLD [C-17].
9. CALL HOLD [C-6]: A Paging trunk cannot be placed on Call Hold.
10. The D
term LCD display indicates BUSY when the Paging trunk is Busy. Reorder tone is returned.
11. If Priority Page is to be used with ALL-ZONE PAGING in ARTD, CDN 6:TCL must be assigned as Data
8, Page with ringback tone. SYS1, Index 73 affects the...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 35
Announcement Service - Attendant A-59
A-59 Announcement Service - Attendant
General Description
This feature allows the Attendant, via the ATTENDANT CONSOLE [A-3], to hear a prearranged announcement
when the Attendant dials a predetermined access code.
Operating Procedure
1. Press an idle loop key.
2. Dial the announcement trunk access code.
3. Listen to the message from announcement machine.
Service Conditions
1. This feature...

NEAX2400 IMX Business Features and Specifications
Page 36NDA-24221, Issue 3
A-60 Attendant-To-Attendant Calling
A-60 Attendant-To-Attendant Calling
General Description
This feature permits an Attendant, via an ATTENDANT CONSOLE [A-3], to access a non-specific free Attendant
by dialing the operator access code, or to call a particular ATTENDANT CONSOLE [A-3] by dialing an individual
Attendant Identification Number.
Operating Procedure
1. Press an idle loop key.
2. Dial the individual Attendant...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 37
Automatic Idle Return A-69
A-69  Automatic Idle Return
General Description
This feature enables a Dterm to become idle automatically after the predetermined time when the line is released by
the opposite station on-hook, etc., on hands-free or the speaker operation.
Operating Procedure
No manual operation is required.
Service Conditions
1. This service may be assigned at each terminal.
2. This service is not available when the...

NEAX2400 IMX Business Features and Specifications
Page 38NDA-24221, Issue 3
A-78 Automatic Number Identification (ANI)
A-78 Automatic Number Identification (ANI)
General Description
This feature automatically sends the Calling Subscribers number to the called party after a response is received from
the distant office. This feature is used for outgoing CO calls (e.g., Enhanced 911 (E911) calls) or TIE Line calls using
DTMF signaling.
Operating Procedure
No manual operation is required. Automatic Number...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 39
Automatic Number Identification (ANI) A-78
Service Conditions (cont’d)
7. Other interactions are the same as for DTMF signal dialing.
8. FCCS link is not available for this feature. 

NEAX2400 IMX Business Features and Specifications
Page 40NDA-24221, Issue 3
A-82 Automated Attendant
A-82 Automated Attendant
General Description
This feature allows a user outside the NEAX2400 IMX to access the system via a public or private network without
the Attendant or users assistance. After or during an announcement, the outside user may originate calls over any
or all of the PBX facilities. 
Operating Procedure
1. The calling party (public or private network) lifts handset; receives dial tone....