NEC Neax 2400 Imx Business Features And Specifications

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 41
Automated Attendant A-82
Service Conditions (cont’d)
6. During the first or second announcement, the system can receive DTMF signals. However, when a DTMF
signal is included in the recorded announcement, the announcement stops (first digit reception). Then,
after providing the second announcement, either redial or forced release is selected (inter-digit time-out).
7. After the first or the second announcement, the system does...

NEAX2400 IMX Business Features and Specifications
Page 42NDA-24221, Issue 3
A-98 Answer Hold - Attendant
A-98 Answer Hold - Attendant
General Description
This feature enables an Attendant to answer an incoming call by pressing the ANSWER key or flashing ICI key. If
the Attendant is already engaged in a call, pressing one of these keys places the first call on Hold and automatically
connects the second one. Use of ANSWER key or ICI key speeds call handling, while Answer Hold prevents
accidental call...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 43
Answer Hold - Attendant A-98
Service Conditions (cont’d)
c.) when the number of available Attendants exceeds the number of incoming calls, the status of
attendant console will be one of the following:
(1) The Attendant will be released from the current call and will be connected to the next incoming
call.
(2) The Attendant will be released from the current call and attendant consoles will be idle.
(3) No change.
4. AUTOMATIC...

NEAX2400 IMX Business Features and Specifications
Page 44NDA-24221, Issue 3
A-99 Authorization Code Display Elimination
A-99  Authorization Code Display Elimination
General Description
This feature eliminates AUTHORIZATION CODE [A-20] and FORCED ACCOUNT CODE [F-7] from being
displayed on the Dterm for security purposes.
Operating Procedure
Procedure 1
(Access code for auth code/forced account code) + (SST) + (auth code/forced account code) + (DT) + (OG
access code) + (OG code)
Dial: (DT) - 10 + (SST) -...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 45
Attendant Overflow A-105
A-105 Attendant Overflow
General Description
This feature allows incoming trunk calls directed to the ATTENDANT CONSOLE [A-3] to overflow to a
predetermined station. The trunk call will ring the Attendant for a pre-programmed time period before overflowing
to the destination station.
Operating Procedure
1. An incoming trunk call arrives at the ATTENDANT CONSOLE [A-3].
2. The Attendant is busy or on...

NEAX2400 IMX Business Features and Specifications
Page 46NDA-24221, Issue 3
A-105 Attendant Overflow
Interactions (cont’d)
3. ATTENDANT OVERFLOW and DELAY ANNOUNCEMENT ATTENDANT [D-114] are mutually
exclusive features. 

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 47
Add On Conference - 8 Party A-121
A-121  Add On Conference - 8 Party
General Description
This service allows the 8-party conference to be established any time by any conferee by use of the 8-party
conference trunk.
Operating Procedure
To establish an 8-party conference:
1. Station A calls Station B; Station B answers.
2. Station A (or B) switch hook flashes (or press TRANSFER key) and dials Station C’s number; Station C...

NEAX2400 IMX Business Features and Specifications
Page 48NDA-24221, Issue 3
A-121 Add On Conference - 8 Party
Service Conditions (cont’d)
9. When all of the eight ports of the 8-party conference trunk are filled with the conferees, no other conferee
can be added to the conference.
10. The station/trunk which is connected to the 8-party conference trunk can release from the conference at
any time.
11. An incoming call from the ringdown trunk, where release cannot be detected, cannot be connected to the...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 49
Add On Conference - 8 Party A-121
Service Conditions (cont’d)
24. The station setting Retain Conference can only cancel Retaining Conference or go on-hook. (No other
operation is available.) When the station goes on-hook, the RETAIN CONF lamp turns off.
25. In case of trunk call origination, the billing is performed against the station which originated the trunk call
until the trunk releases. Therefore, there may be several...

NEAX2400 IMX Business Features and Specifications
Page 50NDA-24221, Issue 3
A-125 Analog Caller ID (Class SM)
A-125  Analog Caller ID (Class SM)
General Description
This feature allows the Dterm to display calling party’s number and/or name on the LCD when a call from analog
C.O. line is terminated. In addition, the calling number can be output as a part of SMDR information.
Caller ID information can be displayed on an analog telephone with a display device or the display of a D
term.
Operating...