NEC Neax 2400 Imx Business Features And Specifications

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 181
Call Block C-150
Operating Procedure (cont’d)
To set the Restriction Number by dialing an optional number:
1. Lift the handset.
2. Press the CALL BLOCK key.
3. Receive special dial tone.
4. Dial number to be restricted.
5. Receive service set tone after the preassigned inter-digit timer (default is 6 seconds). 
(Note 1)
6. The CALL BLOCK key lights red.
7. The dialed number is registered as the Restriction Number.
When Release...

NEAX2400 IMX Business Features and Specifications
Page 182NDA-24221, Issue 3
C-150 Call Block
Operating Procedure (cont’d)
24 digit display of Dterm Series E
 When the last incoming call is displayed (Release 7 software or later):
 When Restriction Number is set (Release 5 software):
 When confirming the Restriction Number (Release 5 software):
 When confirming the Restriction Number (Release 7 software or later):
 When Restriction Number is cancelled (Release 5 software):
 When HELP Key for CALL...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 183
Call Block C-150
Service Conditions
When the Restriction Number is registered by the MAT:
1. When the calling number is not received, this service is not activated.
2. The calling number for this service is assigned to the parameter CID of ACID command. When only the
first part of the calling number is assigned to the CID, this service is applied to any calling number that
begins with the assigned number. For example, when...

NEAX2400 IMX Business Features and Specifications
Page 184NDA-24221, Issue 3
C-150 Call Block
Service Conditions (cont’d)
8. This service is activated corresponding to each line. In case a Dterm containing some lines, the Restriction
Number is effective only for the line to be registered the number.
9. When confirming the registered Restriction Number, the number registered on MY LINE is displayed for
5 seconds on the LCD.
10. This service is available only when the predetermined Restriction Number and...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 185
Call Block C-150
Service Conditions (cont’d)
12. Feature keys and SIDAs will operate for physical and logical stations, as well as inbound trunk calls with
ANI. It will also light the feature keys for both.
13. The COT card for receiving the Caller ID information is shown below:
14. The LC card for notifying the Caller ID information is shown below.
15. The ELC cards to display the indication for the operation procedure on the...

NEAX2400 IMX Business Features and Specifications
Page 186NDA-24221, Issue 3
C-151 Call Return
C-151 Call Return
General Description
This feature allows the Dterm or an analog station to save the received calling number and the received number of
the station. The following two types of saving features are available:
 Automatic Saving: The received calling number/number of the station is automatically saved when the sta-
tion rings. The stored number can be dialed by pressing the feature key or dialing...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 187
Call Return C-151
Operating Procedure (cont’d)
Manual Saving (equal to SAVE AND REPEAT - Dterm [S-24D]
1. Saving Calling Number
a.) Press the S&R key while in conversation using My Line or Sub Line.
b.) The received calling number is saved and the S&R key lights red.
Note:One calling number can be saved. When a calling number has already saved using SAVE AND REPEAT - Dterm, the
calling number is deleted.
2. Displaying Stored...

NEAX2400 IMX Business Features and Specifications
Page 188NDA-24221, Issue 3
C-151 Call Return
Service Conditions (cont’d)
b.) This service is available in the following cases:
 When the trunk incoming call that receives the calling number (Analog COT/ISDN/CCIS trunk)
is directly terminated at the station.
 When the station-to-station call is terminated directly.
c.) When the station answers the call held on Multi Line, the calling number/calling station number
cannot be saved (Held Line is not My...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 189
Call Return C-151
Service Conditions (cont’d)
e.) The latest calling number is saved in the data memory when the service feature class data (SFI:
155) is “0”. Since the latest calling number remains when SFI:155 is changed from “0” to “1”, the
call origination can be operated with the latest calling number saved before the data is changed.
7. Service Conditions for Manual Saving:
a.) Manual Saving is available for the D
term...

NEAX2400 IMX Business Features and Specifications
Page 190NDA-24221, Issue 3
C-154 Call Hold Pick Up
C-154 Call Hold Pick Up
General Description
This feature allows a user to pick up a trunk or station call that is put on hold by a second user. The user can
accomplish this by dialing an access code followed by the telephone number that is holding the call.
Operating Procedure
1. Make a trunk or station call to Station A.
2. Station A places the call in progress on hold.
3. From Station B, dial the access...