NEC Neax 2000 Ivs2 Ccis Features And Specifications
Have a look at the manual NEC Neax 2000 Ivs2 Ccis Features And Specifications online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
CALL TRANSFER - ALL CALLS - CCIS NEAX2000 IVS2 CCIS Features and Specifications NDA-24272, Issue 1.0 Page 31 The linking procedure between two switching offices is as follows in Figure 6: Figure 6 Linking Two Offices Using Call Transfer - All Calls (1 of 2) RG RBT B:4567 C:6789Satellite Office Tributary Office Public Main Office NetworkC: DIALS SHF + 4567 + B: ANSWER C:6789B:4567 Public Network DIALS SHF:(SPD) - 4567 - (RBT)Satellite Office Main Office Public Network Music Station C Transfers Party A to Station B in Satellite OfficeParty A ACTION 1 Using Speed Dial, Station C Transfers Calling Party to Station B in Satellite Office. Calling Party Hears Music On Hold, Transferring Party (C) Hears Ring Back Tone (RBT) while Station B Rings. Public Network
CALL TRANSFER - ALL CALLS - CCIS NEAX2000 IVS2 CCIS Features and SpecificationsPage 32 NDA-24272, Issue 1.0 Figure 6 Linking Two Offices Using Call Transfer - All Calls (2 of 2) C:6789 B: ANSWER C:6789B:4567 B:4567 RG RBT Main Office Tributary OfficeSatellite Office Public Main Office Tributary OfficeSatellite Office Public Network Network + C: ON-HOOK Music Public Network Public Network ACTION 2 B Answers Station C’s Call. C Goes On-Hook. B Is Talking to Calling Party RESULT Speech Path Channel Between Main Office and Tributary Office Becomes Idle and Available for Next Caller.
CALL TRANSFER - ATTENDANT - CCIS NEAX2000 IVS2 CCIS Features and Specifications NDA-24272, Issue 1.0 Page 33 CALL TRANSFER - ATTENDANT - CCIS General Description This feature permits a station user, while connected to a CCIS network call, to transfer a call to an Attendant Console via the CCIS network. Operating Procedure To transfer a call to an Attendant Console: 1. While engaged in a Central Office trunk call, press the hookswitch momentarily and receive Feature Dial Tone. 2. Dial the operator access code. 3. The ATND lamp on the Attendant Console flashes and the buzzer sounds. The station receives ringback tone. To answer from an Attendant Console: 1. Refer to the “NEAX2400 IMX Attendant Console User Guide.” If the station wishes to return to the Central Office trunk call while the Attendant Console is being called: 1. Press the hookswitch momentarily. The ATND lamp on the Attendant Console goes out and the buzzer stops. 2. Ringback tone ceases; the station returns to the Central Office trunk call. Service Conditions 1. This feature is activated to an Attendant Console is in the NEAX2000 IVS2 or the NEAX 2400 IMX in the CCIS network. 2. This feature is available for incoming or outgoing Central Office trunk calls and for station-to-station calls. 3. The feature allows a station user, while participating in a two-party connection (two stations or a station and a trunk), to call the operator so that the operator may transfer the call or provide other assistance as required. 4. If all registers are busy and the station user switch hook flashes, the switch hook flash is ignored by the system and the parties remain connected.
CALLING NAME DISPLAY - CCIS NEAX2000 IVS2 CCIS Features and SpecificationsPage 34 NDA-24272, Issue 1.0 CALLING NAME DISPLAY - CCIS General Description This feature permits the station name of a calling or called party at another switching office, through the CCIS network, to be displayed either on a Multiline Terminal or an Attendant Console. Operating Procedure No manual operation is required. Service Conditions 1. The calling/called station name (maximum of sixteen characters) is displayed on the lower line of the LCD of a Multiline Terminal or an Attendant Console. 2. The called station name will be displayed on the calling Multiline Terminal or Attendant Console during ringing period and for six seconds after the called party answers the call. 3. The calling station name will be displayed when the Multiline Terminal is ringing on its Prime Line or the Attendant Console and for six seconds after the called party answers the call. 4. If the called party is forwarded by Call Forwarding - Outside, the called name displayed at the calling Multiline Terminal or Attendant Console will be the name of the station which answers the call. 5. If the network includes the office which Calling Name Display is restricted, or is connected by no CCIS line, this feature may not be allowed. 6. If the network includes 2400 RDS, MDS, HDS, they must have L version software for Name Display to work. 7. Index 241 bit 1 in the 2400 must be set for 16 digits to display the NEAX2000 IVS 2 Name. 8. If 56K CCIS is used, ESF (24 multiframe) must also be used.
CALLING NUMBER DISPLAY - CCIS NEAX2000 IVS2 CCIS Features and Specifications NDA-24272, Issue 1.0 Page 35 CALLING NUMBER DISPLAY - CCIS General Description This feature permits the number of a calling or called party at another switching office to be displayed either on a Multiline Terminal or an Attendant Console. Operating Procedure No manual operation is required. Service Conditions 1. The called party’s number (maximum of sixteen digits) will be displayed on the Multiline Terminal when the called party answers the call. 2. The calling party’s number will be displayed when the Multiline Terminal is ringing on its Prime Line. 3. If the called party is forwarded via Call Forwarding - All Calls, Call Forwarding - Busy Line, etc., the called number display at the calling Multiline Terminal will be the number of the station which answers the call. 4. When a call with calling party number information (ISDN CPN/Caller-ID/T1-ANI) is received over CCIS, the information can be transferred transparently, a maximum of 16 digits can be displayed on the LCD of the Multiline Terminal, and it also can be sent to the SMDR, or MCI with ANI if provided. Below shows the conditions whether the calling party number is displayed or not when the call is transferred or forwarded to another station. When the call is transferred or forwarded to the station in the same office, the LCD of the transferred/ forwarded station displays the calling party number. When the call is transferred to the station of another office over CCIS, the LCD, SMDR, MCI, or ANI of the transferred station does not display the calling party number. When the call is forwarded to the station of another office over CCIS, the LCD of the forwarded station displays the calling party number. 5. Examples of number displays for inter-office connections are shown in the attached diagrams for the following cases: Multiline Terminal to Multiline Terminal (Figure 7) Multiline Terminal to Attendant Console (Figure 8) Multiline Terminal to Trunk (Figure 9) Attendant Console to Multiline Terminal (Figure 10) Trunk to Multiline Terminal (Figure 11) Intermediate Station Number Display (1) (Figure 12) Intermediate Station Number Display (2) (Figure 13)
CALLING NUMBER DISPLAY - CCIS NEAX2000 IVS2 CCIS Features and SpecificationsPage 36 NDA-24272, Issue 1.0 Figure 7 Inter-Office Connections for Multiline Terminal to Multiline Terminal IVS-NEXT/2400 Elapsed time Called station CALLED CALLINGCCIS820822 NEAX2000 IVS 2B: 4211 A: 2000 A: Dial 8224211 Calling party (A)Called party (B) Called station NEAX2000 IVS2 (Time Display) (Time Display)CCIS LinkCCIS Link 821 (Time Display)8202000 numberCalling station number flashes office code + station number (Max. 8 digits) PARTY ANSWERS8224211 8224211 8202000 (Time Display) Elapsed time Calling station numbernumber
CALLING NUMBER DISPLAY - CCIS NEAX2000 IVS2 CCIS Features and Specifications NDA-24272, Issue 1.0 Page 37 Figure 8 Inter-Office Connections for Multiline Terminal to Attendant Console NEAX2000 IVS 2/2400 Elapsed time Called party CALLED CALLINGCCIS820822 NEAX2000 IVS 2B: ATT A: 2000 A: Dial 0 Calling party (A)Called party (B) Called station NEAX2000 IVS2 821 number PARTY ANSWERS0 822 Trunk number TIE lamp lights Office codeTrunk Group Number TIE lamp lights OPR 112 3 4
CALLING NUMBER DISPLAY - CCIS NEAX2000 IVS2 CCIS Features and SpecificationsPage 38 NDA-24272, Issue 1.0 Figure 9 Inter-Office Connections for Multiline Terminal to Trunk NEAX2000 IVS 2/2400 Called party CALLED CALLINGCCIS820822 NEAX2000 IVS 2 A: 2000 A: Dial Calling party (A)NEAX2000 IVS 2 821 Dialed number PARTY ANSWERS Type of trunk TIE TIE 824-4211 (Time Display) (Time Display)8244211 . . .
CALLING NUMBER DISPLAY - CCIS NEAX2000 IVS2 CCIS Features and Specifications NDA-24272, Issue 1.0 Page 39 Figure 10 Inter-Office Connections for Attendant Console to Multiline Terminal 112 3 4 820OPR 820OPR 224 21 NEAX2000 IVS2/2400 Elapsed time Calling party CALLED CALLINGCCIS820822 NEAX2000 IVS 2B: 4211 A: ATT Calling party (A)Called party (B) Called station NEAX2000 IVS2 821 number PARTY ANSWERS Office code Trunk Group Number Office code (Time Display) (Time Display) Calling party number flashes Trunk number1RT= 10 TK = 1234
CALLING NUMBER DISPLAY - CCIS NEAX2000 IVS2 CCIS Features and SpecificationsPage 40 NDA-24272, Issue 1.0 Figure 11 Inter-Office Connections for Trunk to Multiline Terminal . . . . . . CCSA OPR NEAX2000 IVS2/2400 Elapsed time Calling party CALLED CALLINGCCIS820822 NEAX2000 IVS 2B: 4211 Called party (B)NEAX2000 IVS2 821 PARTY ANSWERS Type of trunk Type of trunk (Time Display) (Time Display) Calling party number flashes RT= 10 TRK = 123 822-4211