NEC Neax 2000 Ivs2 Ccis Features And Specifications

							VOICE MAIL INTEGRATION - CCIS
NEAX2000 IVS2 CCIS Features and Specifications  
NDA-24272, Issue 1.0  Page 101
VOICE MAIL INTEGRATION - CCIS
General Description
This feature allows any station user in the CCIS Network to utilize the Voice Mail System (VMS) with the
Message Center Interface (MCI).
Operating Procedure
To record a message into the VMS:
1. Lift the handset and receive dial tone.
2. Dial the voice mail station number and receive ringback tone.
3. Follow the instructions given by the VMS.
To retrieve a message from the VMS:
1. Lift the handset and receive dial tone.
2. Dial the voice mail station number and receive ringback tone.
The LCD shows:
[            xxx]
               VMS:Voice mail station number
3. Follow the instructions given by the VMS.
To set call forwarding to the VMS:
 Call Forwarding - All Calls
 Call Forwarding - Busy Line
 Call Forwarding - Don’t Answer
 Split Call Forwarding - All Calls
 Split Call Forwarding - Busy Line
 Split Call Forwarding - Don’t Answer
1. Lift the handset and receive dial tone.
2. Dial the Call Forwarding or Split Call Forwarding feature access code, and receive Special Dial Tone.
3. Dial the voice mail station number and receive Service Set Tone.
The LCD shows:
[SET  xxxx]
               VMS:Voice mail station number
To call a station number whose call forwarding is set to VMS:
1. Lift the handset and receive dial tone.
2. Dial the desired station number and receive ringback tone.
The LCD shows:
[FDA  xxx]
             VMS:Voice mail station number
3. Follow the instructions given by the VMS. 
						

							VOICE MAIL INTEGRATION - CCIS
 NEAX2000 IVS2 CCIS Features and SpecificationsPage 102 NDA-24272, Issue 1.0
Service Conditions
1. Rotary telephones are denied access to the VMS.
2. Station user in either NEAX2000 IVS
2 or NEAX2400 may set call forward outside to the VMS. Any calls
forwarded to the VMS will be directed to the personal Mail Box of the station user.
3. Once a message is left in the VMS, the VMS can send Message Waiting Indication to the forwarded station.
4. The destination station number of the VMS must be assigned in system programming for message retrieval
via the Message Wait feature.
5. The station user may set, Call Forwarding-All Calls- CCIS, -Busy Line-CCIS, -Don’t Answer - CCIS to
transfer an incoming call to the VMS.
6. When a call is received from the CCIS trunk to the VMS, the ANI information is not added to the call
connection status information even though the ANI information is sent from the network. 
						

							APPENDIX A: Dterm FIXED FUNCTION KEYS
NEAX2000 IVS2 CCIS Features and Specifications  
NDA-24272, Issue 1.0  Page 103
APPENDIX A: Dterm FIXED FUNCTION KEYS
Series E Series III Description
Answer ANS To answer a waiting call
Conf CNF To establish three-way conversation
Feature FNCTo activate terminal setup functions and to program One-Touch 
Speed Dial/Feature Keys
Hold HOLD To place an internal or external call on hold
Recall LNR/SPD To terminate established call and re-seize internal dial tone
Redial RECALL To active Last Number Call and Speed Calling
Speaker SPKRTo control the built-in speaker which can be used for Hands Free 
dialing/monitoring
Transfer TRFTo transfer established calls to another station, without attendant 
assistance 
						

							APPENDIX B: Dterm LCD DISPLAYS
NEAX2000 IVS2 CCIS Features and SpecificationsPage 104 NDA-24272, Issue 1.0
APPENDIX B: Dterm LCD DISPLAYS
Description Series E Series III
Clock/Calendar Display 10:06 PM  MON 21  APR 1999 10:06 PM TUE 14
Busy BUSY XXXX BUSY XXXX
Restriction RESTRICT XXXX RST XXXX
Do Not Disturb DND XXXX DND XXXX
Call Forwarding - All Calls CF ALL XXXX FDA XXXX
Call Forwarding - Busy Line CF BUSY XXXX FDB XXXX
Call Forwarding - No Answer CF NANS XXXX FDN XXXX
Call Transfer TRANSFER XXXX XFR XXXX
Conference CONF XXXX XXXX CNF XXXX XXXX
Non Exclusive Hold HOLD XXXX HLD XXXX
Exclusive Hold E-HOLD XXXX EHD XXXX
Stack DialREDIAL[*/#]/SPEED -1
82625563RDL[*/#]/SPD -1
82625563