NEC Neax 2000 Ivs2 Ccis Features And Specifications
Here you can view all the pages of manual NEC Neax 2000 Ivs2 Ccis Features And Specifications. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 61
DIAL ACCESS TO ATTENDANT - CCIS NEAX2000 IVS2 CCIS Features and Specifications NDA-24272, Issue 1.0 Page 51 DIAL ACCESS TO ATTENDANT - CCIS General Description This feature allows a station user to call an Attendant Console by dialing an operator call code through the CCIS network. Operating Procedure To call an Attendant Console: 1. The station user dials the operator call code and receives ringback tone. 2. The ATND lamp for Incoming Call Identification flashes on the Attendant Console; the...
Page 62
DIAL ACCESS TO ATTENDANT - CCIS NEAX2000 IVS2 CCIS Features and SpecificationsPage 52 NDA-24272, Issue 1.0 12 00 0 822OPR NEAX2000 IVS2/2400 Elapsed time Called party CALLED CALLINGCCIS820822 NEAX2000 IVS 2B: ATT A: 2000 Calling party (A)Called party (B)NEAX2000 IVS2 821 PA R T Y ANSWERS Office codeTrunk RSC (Time Display) (Time Display) A: Dial 0 2 Dialed number Station number display on the ATT console can be changed to office code + station number by system data. Call...
Page 63
DIRECT-IN TERMINATION - CCIS NEAX2000 IVS2 CCIS Features and Specifications NDA-24272, Issue 1.0 Page 53 DIRECT-IN TERMINATION - CCIS General Description This feature automatically routes incoming exchange calls through CCIS to a preassigned station in the network, without Attendant assistance. Operating Procedure The outside calling party dials the telephone number, as usual. The call is answered at a predetermined station, within the CCIS network, bypassing the Attendant Console. Service Conditions...
Page 64
DISTINCTIVE RINGING - CCIS NEAX2000 IVS2 CCIS Features and SpecificationsPage 54 NDA-24272, Issue 1.0 DISTINCTIVE RINGING - CCIS General Description This feature provides distinctive station ringing patterns for terminated calls, through the CCIS network, so that a station user can distinguish between incoming internal and external calls. Operating Procedure No manual operation is required. Service Conditions 1. Ringing patterns for incoming internal calls on the CCIS network: a. 1 second ring, 2...
Page 65
DO NOT DISTURB - CCIS NEAX2000 IVS2 CCIS Features and Specifications NDA-24272, Issue 1.0 Page 55 DO NOT DISTURB - CCIS General Description This feature allows a station user to establish Do Not Disturb (DND) status on a temporary basis, during which time access to the station from CCIS calls will be denied. Operating Procedure To set Do Not Disturb from a Single Line Telephone or Multiline Terminal: 1. Lift the handset and receive dial tone. 2. Dial the Do Not Disturb - CCIS feature access code and...
Page 66
DO NOT DISTURB - CCIS NEAX2000 IVS2 CCIS Features and SpecificationsPage 56 NDA-24272, Issue 1.0 6. When a Multiline Terminal is set to DND, calls to the primary and secondary extensions will not ring. Trunks programmed to ring will not do so while DND is set, but flashing LED indications are still provided. DND will not deny an Executive Override. 7. If the Do Not Disturb feature access key is pressed while connected to a trunk or station, the following interruptions are denied until that call is...
Page 67
DUAL HOLD - CCIS NEAX2000 IVS2 CCIS Features and Specifications NDA-24272, Issue 1.0 Page 57 DUAL HOLD - CCIS General Description This feature allows two connected Multiline Terminals to be placed on hold simultaneously over the CCIS link. This enables the held parties to answer or originate a call from a secondary extension or the idle primary extension. Operating Procedure To operate Dual Hold - CCIS from a Multiline Terminal: 1. The user at Station A presses the Hold key; the user at Station B is...
Page 68
ELAPSED TIME DISPLAY - CCIS NEAX2000 IVS2 CCIS Features and SpecificationsPage 58 NDA-24272, Issue 1.0 ELAPSED TIME DISPLAY - CCIS General Description This feature provides an LCD which shows the duration of time that a Multiline Terminal is connected to any trunk through the CCIS network. Operating Procedure No manual operation is required. Service Conditions 1. The elapsed time is displayed in the left side of the LCD. 2. The elapsed time can reach a maximum of 9 hours, 59 minutes and 59 seconds,...
Page 69
FLEXIBLE NUMBERING OF STATIONS - CCIS NEAX2000 IVS2 CCIS Features and Specifications NDA-24272, Issue 1.0 Page 59 FLEXIBLE NUMBERING OF STATIONS - CCIS General Description This feature allows voice and data station numbers to be assigned to any instrument in the CCIS network, based solely upon numbering plan limitations. Office location is indicated by all digits of the station number (see Figure 14). Figure 14 Office Location and Station Numbers Operating Procedure No manual operation is required....
Page 70
HANDS-FREE ANSWERBACK - CCIS NEAX2000 IVS2 CCIS Features and SpecificationsPage 60 NDA-24272, Issue 1.0 HANDS-FREE ANSWERBACK - CCIS General Description This feature allows a Multiline Terminal station user to respond to a voice call, through the CCIS network, without lifting the handset. Operating Procedure To answer a Voice Call-CCIS: 1. Press the Feature key followed by 1 to turn on the microphone; the LED associated with MIC lights. 2. Respond to the call in a hands-free manner. Service Conditions...