NEC Neax 2000 Ivs2 Ccis Features And Specifications

HOT LINE - CCIS
NEAX2000 IVS2 CCIS Features and Specifications  
NDA-24272, Issue 1.0  Page 61
HOT LINE - CCIS
General Description
This feature allows two stations, at different nodes in the CCIS network, to be mutually associated on an
automatic ringdown basis through the CCIS network.
Operating Procedure
To place a Hot Line - CCIS call:
1. The user at Station A lifts the handset.
2. Station B is rung.
3. The user at Station B lifts the handset and the connection is established.
Service Conditions
1. If...

HOUSE PHONE - CCIS
 NEAX2000 IVS2 CCIS Features and SpecificationsPage 62 NDA-24272, Issue 1.0
HOUSE PHONE - CCIS
General Description
This feature allows selected stations to call an Attendant Console, through the CCIS network, simply by going
off hook.
Operating Procedure
To call an Attendant in another office:
1. The House Phone - CCIS user lifts the handset.
2. The Attendant in another office is automatically called. The ATND lamps on the Attendant Console flash
and the console buzzer sounds.
Service...

INCOMING CALL IDENTIFICATION - CCIS
NEAX2000 IVS2 CCIS Features and Specifications  
NDA-24272, Issue 1.0  Page 63
INCOMING CALL IDENTIFICATION - CCIS
General Description
This feature allows an Attendant to visually identify the type of service and/or trunk group which is arriving or
waiting to be answered at the Attendant Console through the CCIS network.
Operating Procedure
No manual operation is required.
Service Conditions
1. A flashing lamp indicates a call waiting to be answered.
2. A steady lamp...

INDIVIDUAL ATTENDANT ACCESS - CCIS
 NEAX2000 IVS2 CCIS Features and SpecificationsPage 64 NDA-24272, Issue 1.0
INDIVIDUAL ATTENDANT ACCESS - CCIS
General Description
This feature permits a station user to call a specific Attendant Console, in the CCIS network, using an individual
Attendant Identification Number.
Operating Procedure
1. The station user dials an individual Attendant Identification Number.
2. The Attendant at the directed Attendant Console receives an Incoming Call Identification indication...

LDN NIGHT CONNECTION - CCIS
NEAX2000 IVS2 CCIS Features and Specifications  
NDA-24272, Issue 1.0  Page 65
LDN NIGHT CONNECTION - CCIS
General Description
This feature routes Listed Directory Number (LDN) calls to a preselected station, in the CCIS network, when
the Night mode has been entered.
Operating Procedure
No manual operation is required.
Service Conditions
1. The maximum number of LDNs is eight.
2. The destination party is assigned to Day/Night mode.
Examples:
a. There is an Attendant Console in...

LINK ALARM DISPLAY - CCIS
 NEAX2000 IVS2 CCIS Features and SpecificationsPage 66 NDA-24272, Issue 1.0
LINK ALARM DISPLAY - CCIS
General Description
This feature provides an indication on external equipment when the CCIS link is connected/disconnected, when
the system is initialized, or when the CCH is in make-busy.
Operating Procedure
No manual operation is required.
Service Conditions
1. An external equipment is to be provided by the customer and to be connected with a PN-DK00 card.
2. The indication is...

MESSAGE WAITING LAMP SETTING - ATTENDANT - CCIS
NEAX2000 IVS2 CCIS Features and Specifications  
NDA-24272, Issue 1.0  Page 67
MESSAGE WAITING LAMP SETTING - ATTENDANT - CCIS
General Description
This feature allows an Attendant, in the NEAX2400 IMX system, to set or cancel a Message Waiting lamp
indication, through the CCIS network, on a station in a NEAX2000 IVS2 system.
Operating Procedure
To set a Message Waiting indication from the NEAX2400 IMX ATTCON:
1. Press an idle LOOP key and receive dial...

MESSAGE WAITING LAMP SETTING - ATTENDANT - CCIS
 NEAX2000 IVS2 CCIS Features and SpecificationsPage 68 NDA-24272, Issue 1.0
5. A LC card with the Message Waiting function is required. Single Line Telephones must be equipped with
Message Waiting lamps for 70VDC.
MWL ON/OFFATT  STA
STA
MWL
NEAX2000 IVS2NEAX2400 IMX
CONTROL 

MESSAGE WAITING LAMP SETTING - STATION - CCIS
NEAX2000 IVS2 CCIS Features and Specifications  
NDA-24272, Issue 1.0  Page 69
MESSAGE WAITING LAMP SETTING - STATION - CCIS
General Description
This feature allows a station user, in the NEAX2400 IMX system, to set or cancel a Message Waiting lamp
indication, through the CCIS network, to a station in the NEAX2000 IVS2 system with this feature.
Operating Procedure
To set a Message Waiting indication:
1. Lift the handset and receive dial tone.
2. Dial the...

MESSAGE WAITING LAMP SETTING - STATION - CCIS
 NEAX2000 IVS2 CCIS Features and SpecificationsPage 70 NDA-24272, Issue 1.0
7. If the recipient of the Message Waiting is a NEAX2000 IVS2 Multiline Terminal without a Message
Waiting key assigned, the LCD will indicate MSGX. When scrolling through Message Waiting indications,
the station number which set the Message Waiting will not be indicated.
8. A LC card with the Message Waiting function is required. Single Line Telephones must be equipped with
Message...