NEC Neax 2000 Ivs2 Ccis Features And Specifications

MULTIPLE CALL FORWARDING - DON’T ANSWER - CCIS
NEAX2000 IVS2 CCIS Features and Specifications  
NDA-24272, Issue 1.0  Page 81
MULTIPLE CALL FORWARDING - DON’T ANSWER - CCIS
General Description
This feature allows the last hop of a Multiple Call Forwarding - Don’t Answer sequence to be forwarded over a
CCIS network to a station in another office.
Operating Procedure
To set Call Forwarding - Don’t Answer - CCIS from a Single Line Telephone:
1. Lift the handset and receive dial tone.
2. Dial the Call...

MULTIPLE CALL FORWARDING - DON’T ANSWER - CCIS
 NEAX2000 IVS2 CCIS Features and SpecificationsPage 82 NDA-24272, Issue 1.0
6. Replace the handset or press the Speaker key.
To cancel Call Forwarding - Don’t Answer - CCIS from a Multiline Terminal:
1. Lift the handset or press the Speaker key, and receive dial tone.
2. Press the Call Forwarding - Don’t Answer feature key. The LCD shows:
3. Dial “*” and receive Service Set Tone. The LED of the associated feature key will go out. The LCD shows:
4. Replace...

MULTIPLE CALL FORWARDING - DON’T ANSWER - CCIS
NEAX2000 IVS2 CCIS Features and Specifications  
NDA-24272, Issue 1.0  Page 83
6. If a station is Call Forwarding - Don’t Answer - CCIS to another station in a different tenant and that station
is Call Forwarding - Don’t Answer - CCIS to the Attendant Console, the calling station (via CCIS) will be
connected to the called station’s Attendant Console.
7. For Multiple Call Forwarding - Don’t Answer - CCIS service, the display on a Multiline Terminal will show...

MULTIPLE CALL FORWARDING - DON’T ANSWER - CCIS
 NEAX2000 IVS2 CCIS Features and SpecificationsPage 84 NDA-24272, Issue 1.0
Figure 17  Multiple Call Forwarding - Don’t Answer (1 of 2)
Figure 17  Multiple Call Forwarding - Don’t Answer (2 of 2)
CALLING STATION
CCIS NETWORK
IDLEFG
Office AOffice B
CALL FORWARDING -  ALL CALLS SET
D BE
C
A
BE
C
A
CALLING STATION
CCIS NETWORK
IDLEF
G
Office B
Office A
CALL FORWARDING IS SET,  BUT FORWARDING DOES NOT OCCUR
CALL FORWARDING -  ALL CALLS SET
D 

NIGHT CONNECTION - FIXED - CCIS
NEAX2000 IVS2 CCIS Features and Specifications  
NDA-24272, Issue 1.0  Page 85
NIGHT CONNECTION - FIXED - CCIS
General Description
This feature routes calls normally directed to the Attendant Console to a preselected station in another office,
through the CCIS network, when the Night mode has been entered.
Operating Procedure
To answer a Night Connection - Fixed - CCIS call:
1. An incoming call to the Attendant Console in Night mode is automatically transferred to a...

NIGHT CONNECTION - FLEXIBLE - CCIS
 NEAX2000 IVS2 CCIS Features and SpecificationsPage 86 NDA-24272, Issue 1.0
NIGHT CONNECTION - FLEXIBLE - CCIS
General Description
This feature provides an inter-office night connection service, via the CCIS network, when the calling station
and the night station belong to different offices.
Operating Procedure
To set Night Connection - Flexible - CCIS:
1. The Attendant or fixed night station user in the destination office sets Call Forwarding - All Calls - CCIS to
a...

OUTGOING TRUNK QUEUING - CCIS
NEAX2000 IVS2 CCIS Features and Specifications  
NDA-24272, Issue 1.0  Page 87
OUTGOING TRUNK QUEUING - CCIS
General Description
This feature allows a CCIS network station, upon encountering an all trunk busy signal, to dial a specified access
code and enter a first-in, first-out queue. As soon as a CCIS trunk becomes available, stations in the queue will
be called back on a first-come, first-served basis.
Operating Procedure
To activate Outgoing Trunk Queuing - CCIS:
1....

OUTGOING TRUNK QUEUING - CCIS
 NEAX2000 IVS2 CCIS Features and SpecificationsPage 88 NDA-24272, Issue 1.0
 When a station user in the system encounters a situation where all the outgoing trunks from another
switching office (connected through CCIS) are busy.
 When a station user in another switching office (connected through CCIS) encounters a situation where
all the outgoing trunks from the system are busy.
13. If a station user dials a station in another office, via CCIS, and encounters a situation...

PAGING ACCESS - CCIS
NEAX2000 IVS2 CCIS Features and Specifications  
NDA-24272, Issue 1.0  Page 89
PAGING ACCESS - CCIS
General Description
This feature provides dial access to paging equipment from an Attendant Console or a station, through the CCIS
network.
Operating Procedure
To access paging equipment through CCIS:
1. Lift the handset and receive dial tone.
2. Dial the Paging feature access code.
3. The connection to paging equipment is established.
Service Conditions
1. Amplifiers and speakers must...

RESTRICTION FROM OUTGOING CALLS - CCIS
 NEAX2000 IVS2 CCIS Features and SpecificationsPage 90 NDA-24272, Issue 1.0
RESTRICTION FROM OUTGOING CALLS - CCIS
General Description
This feature automatically restricts users of preselected stations from placing outgoing calls and/or certain
miscellaneous trunk calls through CCIS, without Attendant assistance.
Operating Procedure
No manual operation is required.
Service Conditions
1. The restricted station will automatically receive reorder tone upon attempting...