NEC Neax 2000 Ivs2 Ccis Features And Specifications

SINGLE-DIGIT STATION CALLING - CCIS
NEAX2000 IVS2 CCIS Features and Specifications  
NDA-24272, Issue 1.0  Page 91
SINGLE-DIGIT STATION CALLING - CCIS
General Description
This feature allows the assignment of single-digit station numbers.
Operating Procedure
1. Lift the handset and receive dial tone.
2. Dial the single-digit preprogrammed station number.
3. The called station will be rung.
Service Conditions
1. The single-digit station number must be different from the first digit of:
 A Trunk Access...

STATION-CONTROLLED CONFERENCE - CCIS
 NEAX2000 IVS2 CCIS Features and SpecificationsPage 92 NDA-24272, Issue 1.0
STATION-CONTROLLED CONFERENCE - CCIS
General Description
This feature allows any station of the NEAX2400 IMX to establish a conference among a maximum of eight
parties of stations and/or trunks (inside and outside parties) of the NEAX2000 IVS2 system, through CCIS.
Operating Procedure
To initiate a Station-Controlled Conference:
1. The station user wishing to establish the conference (the...

STATION-TO-STATION CALLING - CCIS
NEAX2000 IVS2 CCIS Features and Specifications  
NDA-24272, Issue 1.0  Page 93
STATION-TO-STATION CALLING - CCIS
General Description
This feature permits any station user to dial another station directly through CCIS without Attendant assistance.
Operating Procedure
To place a Station-To-Station Call:
1. Lift the handset and receive dial tone.
2. Dial the desired station number.
Service Conditions
1. If the called station is off-hook, the originating station receives a...

STATION-TO-STATION CALLING - OPERATOR ASSISTANCE - CCIS
 NEAX2000 IVS2 CCIS Features and SpecificationsPage 94 NDA-24272, Issue 1.0
STATION-TO-STATION CALLING - 
OPERATOR ASSISTANCE - CCIS
General Description
This feature allows a station user to call another station in the CCIS network, with the assistance of an Attendant
Console operator.
Operating Procedure
To place a Station-To-Station Call through the Attendant Console:
1. Lift the handset and receive dial tone.
2. Dial the operator access code.
3....

TOLL RESTRICTION - 3/6 DIGITS - CCIS
NEAX2000 IVS2 CCIS Features and Specifications  
NDA-24272, Issue 1.0  Page 95
TOLL RESTRICTION - 3/6 DIGITS - CCIS
General Description
This feature allows the system to be programmed to restrict outgoing calls, through CCIS, according to specific
Area and/or Office Codes. This restriction is determined on the basis of a three-digit Area Code or six-digit Area
and Office Code numbering plan.
Operating Procedure
No manual operation is required.
Service Conditions
1....

TRUNK ANSWER FROM ANY STATION - CCIS
 NEAX2000 IVS2 CCIS Features and SpecificationsPage 96 NDA-24272, Issue 1.0
TRUNK ANSWER FROM ANY STATION - CCIS
General Description
This feature allows any station, not restricted from incoming calls, to answer incoming calls when the network
is in Night mode.
When this feature is activated, incoming exchange network calls will activate a common alert Trunk Answer
From Any Station (TAS) signal at the customer premises. By dialing a specified code, any station may...

TRUNK-TO-TRUNK RESTRICTION - CCIS
NEAX2000 IVS2 CCIS Features and Specifications  
NDA-24272, Issue 1.0  Page 97
TRUNK-TO-TRUNK RESTRICTION - CCIS
General Description
This feature allows trunk-to-trunk tandem restriction by caller’s information sent from each office (e.g., caller
is a trunk) through the CCIS Network.
Case 1: A tandem connection at the following office can be restricted by Trunk Restriction Class of Trunk A
and Outgoing Connection Restriction data of Trunk B.
Case 2: When Station B...

UNIFORM NUMBERING PLAN - CCIS
 NEAX2000 IVS2 CCIS Features and SpecificationsPage 98 NDA-24272, Issue 1.0
UNIFORM NUMBERING PLAN - CCIS
General Description
In a CCIS network, a Uniform Numbering Plan enables a station user to call any other station in the network.
Two alternative numbering plans are provided. In the first plan, the station user dials any digit station number
from three to eight. The location of the office is identified by the first one-, two-, or three-digit of the station
number. In the...

UNIFORM NUMBERING PLAN - CCIS
NEAX2000 IVS2 CCIS Features and Specifications  
NDA-24272, Issue 1.0  Page 99
Figure 18  Uniform Numbering Plan
54XX
3XXX
   3 to 8-Digit
4XXX
51XX52XX
6XXXX
Public
Main Office
Tributary OfficeSatellite Office
Public    First 1 to 3-digit     Station Numbers
     indicate the Office Location
Network Network
Main Office
XXXX
XXXX
   1,2 or 3-Digit Office Code
XXXX
XXXXXXXX
XXXX
222
244233 OFFICE CODE
Public
Tributary OfficeSatellite Office
Public
Network
Network    2 to...

VOICE CALL - CCIS
 NEAX2000 IVS2 CCIS Features and SpecificationsPage 100 NDA-24272, Issue 1.0
VOICE CALL - CCIS
General Description
This feature provides a voice path, through the CCIS network, between a Multiline Terminal in one office and
a Multiline Terminal in another office. This path is established from the calling party to the called party’s built-
in speaker. If the called party’s MIC lamp is on, the called party can have a conversation in hands-free.
Operating Procedure
From a Multiline...