NEC Neax 2000 Ivs2 Ccis Features And Specifications

MISCELLANEOUS TRUNK ACCESS - CCIS
NEAX2000 IVS2 CCIS Features and Specifications  
NDA-24272, Issue 1.0  Page 71
MISCELLANEOUS TRUNK ACCESS - CCIS
General Description
This feature provides access to all types of external and customer-provided equipment/facilities, such as Tie
Line and exchange network, along with Dictation, Paging Access - CCIS and Code Calling through the CCIS
network.
Operating Procedure
No manual operation is required.
Service Conditions
1. Access to these trunk routes is allowed or...

MISCELLANEOUS TRUNK RESTRICTION - CCIS
 NEAX2000 IVS2 CCIS Features and SpecificationsPage 72 NDA-24272, Issue 1.0
MISCELLANEOUS TRUNK RESTRICTION - CCIS
General Description
This feature denies certain stations and dial-repeating tie trunks access to specific trunk groups, such as Tie Line,
exchange network, Dictation or Paging Access - CCIS through the CCIS network.
Operating Procedure
No manual operation is required.
Service Conditions
1. Restricted call attempts will receive reorder tone.
2. Station...

MULTIPLE CALL FORWARDING - ALL CALLS - CCIS
NEAX2000 IVS2 CCIS Features and Specifications  
NDA-24272, Issue 1.0  Page 73
MULTIPLE CALL FORWARDING - ALL CALLS - CCIS
General Description
This feature allows the last hop of a Multiple Call Forwarding - All Calls sequence to be forwarded over a CCIS
network to a station in another office.
Operating Procedure
To set Call Forwarding - All Calls from a Single Line Telephone:
1. Lift the handset and receive dial tone.
2. Dial the Call Forwarding - All Calls...

MULTIPLE CALL FORWARDING - ALL CALLS - CCIS
 NEAX2000 IVS2 CCIS Features and SpecificationsPage 74 NDA-24272, Issue 1.0
6. Replace the handset or press the Speaker key.
To cancel Call Forwarding - All Calls from a Multiline Terminal:
1. Lift the handset or press the Speaker key, and receive dial tone.
2. Press the Call Forwarding - All Calls feature key. The LCD shows:
3. Dial “*” and receive Service Set Tone. The LED of the associated feature key will go out. The LCD shows:
4. Replace the handset or...

MULTIPLE CALL FORWARDING - ALL CALLS - CCIS
NEAX2000 IVS2 CCIS Features and Specifications  
NDA-24272, Issue 1.0  Page 75
7. If two stations have set Call Forwarding - All Calls - CCIS to each other, an incoming call will not be
forwarded.
8. If the destination station in a Multiple Call Forwarding - All Calls - CCIS situation is busy and has not set
Call Forwarding - Busy, the calling party will receive busy tone.
9. Multiple Call Forwarding - All Calls - CCIS and Call Forwarding - Busy - CCIS may be...

MULTIPLE CALL FORWARDING - ALL CALLS - CCIS
 NEAX2000 IVS2 CCIS Features and SpecificationsPage 76 NDA-24272, Issue 1.0
Figure 15  Multiple Call Forwarding - All Calls (1 of 2)
Figure 15  Multiple Call Forwarding - All Calls (2 of 2)
CALLING STATION
CCIS NETWORK
IDLEFG
Office AOffice B
CALL FORWARDING -  ALL CALLS SET
D BE
C
A
BE
C
A
CALLING STATION
CCIS NETWORK
IDLEF
G
Office B
Office A
CALL FORWARDING IS SET,  BUT FORWARDING DOES NOT OCCUR
CALL FORWARDING -  ALL CALLS SET
D 

MULTIPLE CALL FORWARDING - BUSY LINE - CCIS
NEAX2000 IVS2 CCIS Features and Specifications  
NDA-24272, Issue 1.0  Page 77
MULTIPLE CALL FORWARDING - BUSY LINE - CCIS
General Description
This feature allows the last hop of a Multiple Call Forwarding - Busy Line sequence to be forwarded over a
CCIS network to a station in another office.
Operating Procedure
To set Call Forwarding - Busy Line - CCIS from a Single Line Telephone:
1. Lift the handset and receive dial tone.
2. Dial the Call Forwarding - Busy...

MULTIPLE CALL FORWARDING - BUSY LINE - CCIS
 NEAX2000 IVS2 CCIS Features and SpecificationsPage 78 NDA-24272, Issue 1.0
6. Replace the handset or press the Speaker key.
To cancel Call Forwarding - Busy Line - CCIS from a Multiline Terminal:
1. Lift the handset or press the Speaker key, and receive dial tone.
2. Press the Call Forwarding - Busy Line feature key. The LCD shows:
3. Dial “*” and receive service set tone. The LED of the associated feature key will be extinguished. The LCD
displays:
4. Replace...

MULTIPLE CALL FORWARDING - BUSY LINE - CCIS
NEAX2000 IVS2 CCIS Features and Specifications  
NDA-24272, Issue 1.0  Page 79
a. Station A calls Station B. Station B is set to Multiple Call Forwarding - Busy Line - CCIS from 
Station C to Station G. Multiple Call Forwarding - Busy Line - CCIS occurs to Station G. If Station G 
is idle, Station G will ring. If Station G is busy, busy tone is returned from Station G. Station A may 
not activate Call Back - CCIS to Station G. Please refer to the first diagram...

MULTIPLE CALL FORWARDING - BUSY LINE - CCIS
 NEAX2000 IVS2 CCIS Features and SpecificationsPage 80 NDA-24272, Issue 1.0
Figure 16  Multiple Call Forwarding - Busy Line (1 of 2)
Figure 16  Multiple Call Forwarding - Busy Line (2 of 2)
CALLING STATION
CCIS NETWORK
IDLEFG
Office AOffice B
CALL FORWARDING -  ALL CALLS SET
D BE
C
A
BE
C
A
CALLING STATION
CCIS NETWORK
IDLEF
G
Office B
Office A
CALL FORWARDING IS SET,  BUT FORWARDING DOES NOT OCCUR
CALL FORWARDING -  ALL CALLS SET
D