NEC Neax 2000 Ivs2 Ccis Features And Specifications

CALL FORWARDING - BUSY LINE - CCIS
NEAX2000 IVS2 CCIS Features and Specifications  
NDA-24272, Issue 1.0  Page 21
11. Call Forwarding-Busy Line - CCIS, when set in a Station Hunting group member, is effective only when
the entire hunt group is busy. 
12. If the forwarding number is an ACD/UCD group number and a member of the group is idle, the call rings
at the idle group member’s station. If all members of the group are busy, the call remains in queue waiting
for a member to become available.
13. If any...

CALL FORWARDING - BUSY LINE - CCIS
 NEAX2000 IVS2 CCIS Features and SpecificationsPage 22 NDA-24272, Issue 1.0
22. When a call is forwarded through CCIS, and then forwarded to another station by Call Forwarding - All
Calls/Busy Line/Don’t Answer or UCD Hunting, the last forwarding station number or the pilot station
number of UCD Group is indicated.
PBX-APBX-B
STATION
/TRUNKCCIS
STATION 2000
Kind of Call Forwarding
Call Forwarding-All Calls/
/Busy Line/Don’t Answer. Call is forwarded from
Station 2000...

CALL FORWARDING - DON’T ANSWER - CCIS
NEAX2000 IVS2 CCIS Features and Specifications  
NDA-24272, Issue 1.0  Page 23
CALL FORWARDING - DON’T ANSWER - CCIS
General Description
This feature permits a call to an unanswered station to be forwarded to a predesignated station or to an Attendant
Console in another office, when the called station does not answer after a predetermined time period.
Operating Procedure
To set a Call Forwarding-Don’t Answer - CCIS from a Single Line Telephone:
1. Lift the handset...

CALL FORWARDING - DON’T ANSWER - CCIS
 NEAX2000 IVS2 CCIS Features and SpecificationsPage 24 NDA-24272, Issue 1.0
5. Wait approximately five seconds and receive Service Set Tone. The LED lights. The LCD shows:
6. Replace the handset or press the Speaker key.
To cancel a Call Forwarding-Don’t Answer - CCIS from a Multiline Terminal:
1. Lift the handset or press the Speaker key and receive dial tone.
2. Press the Call Forwarding-Don’t Answer feature access key. The LCD shows:
3. Dial “*” and receive...

CALL FORWARDING - DON’T ANSWER - CCIS
NEAX2000 IVS2 CCIS Features and Specifications  
NDA-24272, Issue 1.0  Page 25
10. The operator answering a Call Forwarding call can identify the called station number on the Attendant
Console display if the calling party line is a trunk.
11. When the Attendant extends a call to a station in the same switching office which has set Call Forwarding-
Don’t Answer - CCIS, the called station will ring for 30 seconds. If, after this time the call has not been
answered,...

CALL FORWARDING - DON’T ANSWER - CCIS
 NEAX2000 IVS2 CCIS Features and SpecificationsPage 26 NDA-24272, Issue 1.0
23. When a call is forwarded through CCIS, and then forwarded to another station by Call Forwarding - All
Calls/Busy Line/Don’t Answer or UCD Hunting, the last forwarding station number or the pilot station
number of UCD Group is indicated.
PBX-APBX-B
STATION
/TRUNKCCIS
STATION 2000
Kind of Call Forwarding
Call Forwarding-All Calls/
/Busy Line/Don’t Answer. Call is forwarded from
Station 2000...

CALL FORWARDING - INTERCEPT - CCIS
NEAX2000 IVS2 CCIS Features and Specifications  
NDA-24272, Issue 1.0  Page 27
CALL FORWARDING - INTERCEPT - CCIS
General Description
This feature allows calls to an inoperative number, through a CCIS trunk, to be intercepted and automatically
routed to a recorded announcement informing the caller that an inoperative number was dialed and giving the
Listed Directory Number for information.
Operating Procedure
No manual operation is required once this feature has been...

CALL FORWARDING - INTERCEPT - CCIS
 NEAX2000 IVS2 CCIS Features and SpecificationsPage 28 NDA-24272, Issue 1.0
Service Conditions
1. This feature requires a Digital Announcement Trunk Card (DAT).
2. This feature is provided on a system basis.
3. Calls to restricted codes will receive reorder tone.
4. Only one common message can be provided for the different intercept conditions.
5. The following call conditions are routed to Call Forwarding - Intercept - CCIS:
 Vacant level
 Unassigned station number 

CALL FORWARDING - OVERRIDE - CCIS
NEAX2000 IVS2 CCIS Features and Specifications  
NDA-24272, Issue 1.0  Page 29
CALL FORWARDING - OVERRIDE - CCIS
General Description
This feature allows a target station user (Station A) to call a station (Station B) which has Call Forwarding - All
Calls - CCIS set. 
Operating Procedure
No manual operation is required.
Service Conditions
1. This feature is allowed to all stations in the system, except Attendant Console(s).
2. Any station which has set Call Forwarding -...

CALL TRANSFER - ALL CALLS - CCIS
 NEAX2000 IVS2 CCIS Features and SpecificationsPage 30 NDA-24272, Issue 1.0
CALL TRANSFER - ALL CALLS - CCIS
General Description
This feature allows a station user to transfer incoming or outgoing Central Office, intra-office and inter-office
calls to another station in the CCIS network, without Attendant assistance.
Operating Procedure
To transfer a call in progress from a Single Line Telephone:
1. Press the hookswitch momentarily and receive Feature Dial Tone.
2. Dial...