NEC Neax 2000 Ivs2 Ccis Features And Specifications

CALL BACK - CCIS
NEAX2000 IVS2 CCIS Features and Specifications  
NDA-24272, Issue 1.0  Page 11
6. The originally called stations LCD shows:
To cancel a Call Back - CCIS from a Multiline Terminal:
1. Lift the handset or press the Speaker key; receive dial tone.
2. Press the Call Back feature key and receive Service Set Tone. The feature is canceled.
3. The LCD shows:
Service Conditions
1. If Call Back - CCIS is not answered within 30 seconds (at the calling station), ringing will stop and Call
Back -...

CALL BACK - CCIS
 NEAX2000 IVS2 CCIS Features and SpecificationsPage 12 NDA-24272, Issue 1.0
13. When the calling party dials the Call Back - CCIS feature access code or presses the CALL BACK key, if
the called party goes idle (while the calling party is still off hook), the calling party hears ringback tone and
the called party hears ringing. If the called party lift the handset, the parties can talk with each other.
Figure 3  Call Back
Tributary OfficeService Set Tone Busy
C:6789 A:2345
C:DIALS...

CALL BACK - CCIS
NEAX2000 IVS2 CCIS Features and Specifications  
NDA-24272, Issue 1.0  Page 13
14. When the calling party waits on hook after having set Call Back-CCIS, the link is established as shown in
Figure 4:
Figure 4  Established Link with Call Back
Main Office Main Office
Service Tributary Office
C:6789 A:2345
C:6789B:4567
B:4567 C: ON HOOK
A:2345C:DIALS Public
Satellite Office
Public
Tributary Office Public
Satellite Office
Public Network
Set Tone
Network
(DT)-4567-(BT)-SHF-1-(SST)
         TO...

CALL BACK - CCIS
 NEAX2000 IVS2 CCIS Features and SpecificationsPage 14 NDA-24272, Issue 1.0
15. If the called party goes on hook while the calling party is waiting on hook for Call Back-CCIS, both the
calling and called parties will be rung simultaneously, if the setting station is in the NEAX2400 IMX
system.
When both parties go off hook, they can talk with each other. The party who answers first hears ringback
tone. If the setting station is in the NEAX2000 IVS
2 system, the calling station is called...

CALL FORWARDING - ALL CALLS - CCIS
NEAX2000 IVS2 CCIS Features and Specifications  
NDA-24272, Issue 1.0  Page 15
CALL FORWARDING - ALL CALLS - CCIS
General Description
This feature permits all calls destined for a particular station to be routed to another station or to an Attendant
Console, in another office in the CCIS network, regardless of the status (busy or idle) of the called station. The
activation and cancellation of this feature may be accomplished by either the station user or an Attendant....

CALL FORWARDING - ALL CALLS - CCIS
 NEAX2000 IVS2 CCIS Features and SpecificationsPage 16 NDA-24272, Issue 1.0
5. Replace the handset or press the Speaker key.
To cancel a Call Forwarding - All Calls - CCIS from a Multiline Terminal:
1. Lift the handset or press the Speaker key and receive dial tone.
2. Press the Call Forwarding - All Calls feature access key. The LCD shows:
3. Dial “*” and receive Service Set Tone. The LED of the associated feature key will go out. The LCD shows:
4. Replace the handset...

CALL FORWARDING - ALL CALLS - CCIS
NEAX2000 IVS2 CCIS Features and Specifications  
NDA-24272, Issue 1.0  Page 17
8. When calls are forwarded to the Attendant, the Incoming Call Identification feature does not allow the
Attendant to identify the call as a forwarded call.
9. When Outgoing Trunk Queuing is provided, ringback is applied to the forwarding station and not to the
designated station.
10. When a call is forwarded, the station number recorded for Station Message Detail is the forwarding station....

CALL FORWARDING - ALL CALLS - CCIS
 NEAX2000 IVS2 CCIS Features and SpecificationsPage 18 NDA-24272, Issue 1.0
18. When a call is forwarded through CCIS, and then forwarded to another station by Call Forwarding - All
Calls/Busy Line/Don’t Answer or UCD Hunting, the last forwarding station number or the pilot station
number of UCD Group is indicated.
PBX-APBX-B
STATION
/TRUNKCCIS
STATION 2000
Kind of Call Forwarding
Call Forwarding-All Calls/
/Busy Line/Don’t Answer. Call is forwarded from
Station 2000...

CALL FORWARDING - BUSY LINE - CCIS
NEAX2000 IVS2 CCIS Features and Specifications  
NDA-24272, Issue 1.0  Page 19
CALL FORWARDING - BUSY LINE - CCIS
General Description
This feature permits a call to a busy station to be immediately forwarded to a predesignated station or to an
Attendant Console in another office in the CCIS network.
Operating Procedure
To set a Call Forwarding-Busy Line - CCIS from a Single Line Telephone:
1. Lift the handset and receive dial tone.
2. Dial the Call Forwarding-Busy Line...

CALL FORWARDING - BUSY LINE - CCIS
 NEAX2000 IVS2 CCIS Features and SpecificationsPage 20 NDA-24272, Issue 1.0
5. Wait approximately five seconds and receive Service Set Tone. The LED lights and the LCD shows:
6. Replace the handset or press the Speaker key.
To cancel a Call Forwarding-Busy Line - CCIS from a Multiline Terminal:
1. Lift the handset or press the Speaker key and receive dial tone.
2. Press the Call Forwarding-Busy Line key. The LCD shows:
3. Dial “*” and receive Service Set Tone. The LED...