NEC Neax 2000 Ivs2 Ccis Features And Specifications

ATTENDANT CAMP-ON WITH TONE INDICATION - CCIS
NEAX2000 IVS2 CCIS Features and Specifications  
NDA-24272, Issue 1.0  Page 1
ATTENDANT CAMP-ON WITH TONE INDICATION - CCIS
General Description
This feature permits the Attendant, when the desired station at another switching office is busy, to hold an
incoming call in a special waiting mode. A distinctive Camp-On tone is sent to the busy station when the
Attendant sets Camp-On. When that station becomes idle, it is automatically rung and connected to the...

ATTENDANT CAMP-ON WITH TONE INDICATION - CCIS
 NEAX2000 IVS2 CCIS Features and SpecificationsPage 2 NDA-24272, Issue 1.0
5. The connecting link between the calling party and the called party will be reserved in the normal manner,
and the RELEASE key will be inoperative when the link between the two switching offices cannot be
reserved.
6. All calls completed by the Attendant to a busy station are held waiting. A single 128 millisecond burst tone
is directed toward the busy station every eight seconds.
7....

ATTENDANT CAMP-ON WITH TONE INDICATION - CCIS
NEAX2000 IVS2 CCIS Features and Specifications  
NDA-24272, Issue 1.0  Page 3
The linking procedure between two switching offices is as shown in Figure 1:
Figure 1  Linking Two Offices (1 of 2)
Music Public
Tributary Office Public
Attendant Console
MusicBusyDial
RELEASEC:6789
C:6789 ATT: RELEASEB:4567
B:4567
Setting Camp-OnMain Office
Tributary OfficeSatellite Office
Public
Attendant Console
Main OfficeSatellite Office
Public (NEAX2000 IVS
2) (NEAX2400/...

ATTENDANT CAMP-ON WITH TONE INDICATION - CCIS
 NEAX2000 IVS2 CCIS Features and SpecificationsPage 4 NDA-24272, Issue 1.0
Figure 1  Linking Two Offices (2 of 2)
RBT Main Office
Main OfficePublic Music Public 
RG
C:6789B:4567
Called Party ReleaseB:4567
C:6789
ROTB: ON HOOK Attendant
Tributary OfficeSatellite Office
Public 
Attendant
Tributary OfficeSatellite Office
Public (NEAX2000 IVS2) Console Network
(NEAX2400/
NEAX2000 IVS
2)
(NEAX2000 IVS
2)
Network
Network
Console(NEAX2000 IVS
2)
(NEAX2400/
NEAX2000...

ATTENDANT CONTROLLED CONFERENCE - CCIS
NEAX2000 IVS2 CCIS Features and Specifications  
NDA-24272, Issue 1.0  Page 5
ATTENDANT CONTROLLED CONFERENCE - CCIS
General Description
This feature permits an Attendant (NEAX2400 IMX) to establish a conference, through CCIS, with up to eight
parties of stations and/or trunks (inside and outside parties).
Operating Procedure
To activate an Attendant Controlled Conference - CCIS:
1. A station (conference leader) calls an Attendant (NEAX2400 IMX only) to request a...

BROKERAGE - HOT LINE - CCIS
 NEAX2000 IVS2 CCIS Features and SpecificationsPage 6 NDA-24272, Issue 1.0
BROKERAGE - HOT LINE - CCIS
General Description
This feature provides a ringdown connection between two stations, each using a Multiline Terminal, in different
offices in the CCIS Network.
Operating Procedure
To access a Brokerage - Hot Line - CCIS from a Multiline Terminal:
1. Lift the handset or press the Speaker key.
2. Press the line/feature key associated with the preassigned station. The...

BUSY VERIFICATION - CCIS
NEAX2000 IVS2 CCIS Features and Specifications  
NDA-24272, Issue 1.0  Page 7
BUSY VERIFICATION - CCIS
General Description
This feature permits an Attendant, via the Attendant Console on the NEAX2400 IMX or the NEAX2000 IVS2,
to interrupt a busy station’s call at another switching office connected through CCIS.
Operating Procedure
To activate a Busy Verification - CCIS:
1. Press an idle LOOP key.
2. Dial the desired station number and receive busy tone.
3. Press the BV key.
4. A...

BUSY VERIFICATION - CCIS
 NEAX2000 IVS2 CCIS Features and SpecificationsPage 8 NDA-24272, Issue 1.0
NEAX2000 IVS2
CCIS
ATT  To STA/CO/TIE/CCIS
BV STANEAX2400
/NEAX2000 IVS2
PBX-APBX-B
By dialing the busy station number in PBX-A and pressing Busy/Verification Feature key, the Attendant Console can verify Busy
status of any station in PBX-A. 

BUSY VERIFICATION - CCIS
NEAX2000 IVS2 CCIS Features and Specifications  
NDA-24272, Issue 1.0  Page 9
The linking procedure between two switching offices is shown in Figure 2:
Figure 2  Linking Two Switching Offices
Main OfficeBusy Main Office
Tributary Office
ATT: BVDial
C:6789
C:6789B:4567
B:4567 Attendant Console
Satellite Office
Public Network
Tributary Office Attendant
Satellite Office
Public Network (NEAX2400/
NEAX2000 IVS
2)Tone4567 (BT)
(NEAX2000 IVS
2)
(NEAX2000 IVS
2)
Console
(NEAX2000 IVS
2)...

CALL BACK - CCIS
 NEAX2000 IVS2 CCIS Features and SpecificationsPage 10 NDA-24272, Issue 1.0
CALL BACK - CCIS
General Description
This feature provides inter-office Call Back. A station who has dialed a busy station at another office can set
Call Back - CCIS by dialing a feature access code. When this feature has been set, the setting station will ring
as soon as the busy station becomes available.
Operating Procedure
To set a Call Back - CCIS from a Single Line Telephone:
1. Dial the desired station...